AMICO
SUBMITTAL DETAILS
ALABAMA METAL INDUSTRIES CORPORATION
Select From List
Welded Bar Grating Close-Mesh
WELDED BAR GRATING
7-W-4 Close-Mesh
PART11GENERAL
GENERAL
PART
1.1 SCOPE
SCOPE
1.1
A. Supply and install welded metal grating that is
A.
resistance welded to meet project documents.
1.2 MATERIAL
MATERIALAPPLICATION
APPLICATION
1.2
A. Select From List
A.
®
Alabama Metal Industries Corporation
January 2011
1.3 BASE
BASEMATERIAL
MATERIALSELECTION
SELECTION
1.3
A. Select From List
A.
1.4 REFERENCES
REFERENCES--Meets
Meetsor
orExceeds
Exceeds
1.4
A. NAAMM
NAAMMMBG
MBG531531-Bar
BarGrating
GratingManual
Manual
A.
B. NAAMM
NAAMMMBG
MBG532
532--Heavy
HeavyDuty
DutyMetal
MetalBar
BarGrating
Grating
B.
Manual
Manual
C. ADA
ARRA
American Recovery
and Reinvestment
Act
C.
- 1 -Americans
with Disabilities
Act
D. ARRA
ASTM-Standards
referencedand
in NAAMM
Standards
D.
American Recovery
Reinvestment
Act
E. ASTM
AWS -Standards
American Welding
Codes
E.
referenced
in NAAMM Standards
F. AWS - American Welding Codes
1.5 QUALITY ASSURANCE - Meets or Exceeds
A. MeetsASSURANCE
“Buy American- Meets
Procurement”
1.5 QUALITY
or Exceeds
B. Meets
Made “Buy
in theAmerican
United States
of America
A.
Procurement”
B. Made in the United States of America
Robotically fabricated treads with Quality
PARTC.2 AMICO
PRODUCTS
Control
testing
2.1 MANUFACTURERprocess to exceed OSHA - Fixed
Stairs 29CFR1910.24.
A. Industrial
Basis of Design:
Metal grating and attachment
brackets as produced and distributed by Alabama
Metal Industries Corporation, AMICO, 3245
PART 2 PRODUCTS
Fayette Avenue, Birmingham, Alabama 35208.
2.1 MANUFACTURER
800/366-2642,
205/787-2611
at
A. Basis
of Design:Tel
Metal
grating andonline
attachment
www.amico-online.com
brackets
as produced and distributed by Alabama
Metal Industries Corporation, AMICO, 3245
Fayette Avenue, Birmingham, Alabama 35208.
800/366-2642, Tel 205/787-2611 online at
www.amico-online.com
2.2 GRATING DESCRIPTION
A. Bearing Bar Height shall be: Select From List
B. Bearing Bar Thickness shall be:
1/8" Thick Allowing 65% Open Area
C. Cross Bar spacing shall be 2-inches on center
D. Surface Condition shall be: Select From List
E. Grating Panel Width shall be:
Select From List
F. Grating Panel Length shall be:
Select From List
2.3 FINISH SELECTION
A. Select From List
B. Custom color shall be:
Select From List
2.4 FASTENERS
A. Grating and system fastening materials shall be
supplied by one source to assure quality control.
B. Fasteners shall vary by end use. Contact AMICO
800/366-2642 for attachment recommendations.
1
Americans with Disabilities Act (ADA) in applying the requirements of the Americans with Disabilities Act Accessibility Guidelines (ADAAG) to buildings and facilities; the smaller
dimension of the grate openings shall be no more than 1/2 inch, and the long dimension of rectangular gaps shall be placed perpendicular to the usual direction of travel.
All information contained herein is accurate as known at the time of publication. Specifications may change and AMICO
reserves the right to change product specifications without notice and without incurring obligations.
ALABAMA METAL INDUSTRIES CORPORATION
3245 Fayette Avenue ◊ Birmingham, AL 35208 ◊ Telephone 800/366-2642 ◊ Facsimile 205/786-6527
email [email protected]