FILLING CHART
Refer to Operators Manual for detailed filling instructions.
Part #
Item
Net Wt.
Net Wt. of
Solvent/Propellant
Suggested Strokes*
(Paint in grams/oz)
Total Package Wt.
Label Wt.
B45106
DV6
6oz
85gm / 3oz
6-8 (51gm / 1.8oz)
136gm / 4.75oz
128gm / 4.5oz
B45112
DV12
12oz
164gm / 5.8oz
9-11 (98gm / 3.5oz)
262gm / 9.25oz
255gm / 9.0oz
B45116
DV16
16oz
216gm / 7.6oz
11-13 (130gm / 4.6oz)
347gm / 12.25oz
340gm / 12.0oz
B45216
FV16
16oz
216gm / 7.6oz
11-13 (130gm / 4.6oz)
347gm / 12.25oz
340gm / 12.0oz
B35316
AB16
16oz
201gm / 7.1oz
12-14 (146gm / 5.15oz)
347gm / 12.25oz
340gm / 12.0oz
*Weigh can before and after filling to ensure correct weight.
MasterBlend is designed to accommodate most solvent-blend systems. Some lacquers may require reduction with lacquer
thinner prior to Omni-Filling. As a starting point, we recommend 5 parts lacquer to 1 part thinner by volume. Always check
the first can for application. If the spray is too coarse, additional reduction is in order. Make sure that you Omni-Fill the
specified amount required for the can size of the reduced material for the optimum aerosol package.
ACCESSORIES
Also available:
FEMALE CAN ADAPTER
For use with One-Blend and MasterBlend female aerosol cans.
• Converts Omni-Fill® 15, Omni-Fill®
35 and Omni-Fill® 100 for use
with One-Blend and MasterBlend
female cans
• Easy to use, no tools required
B15100
Female Can
• Fast, efficient filling accessory
Adapter
B14610 Plastic Liner
B14628 Pressing Tool
B14633 Check Ball (6 pack with O-Ring), not pictured
B35318 11EZ Retro Kit
B14610
(a spanner wrench
is included
with B15100)
B14628
VALVE CLEARING TOOLS
The valve clearing device enables you to clear
the spray mechanism before seating the actuator.
This accessory speeds up and simplifies the
finishing process when a number of cans are
being filled.
• Prevents clogging
• Clears valve stem
B35318
Valve Clearing Tool
Male Valve: B25217
Female Valve: B35317
©1999 The Sherwin-Williams Company (Rev.07)
(866) 519-2884 • Cleveland, OH 44128
SIS-4116A
CHOOSE THE RIGHT FILL FOR YOU.
MASTER YOUR FILLING REQUIREMENTS.
From Large Volume Custom Colors to
Single Cans of Touch-Up Paint
Whether you Need Premium Valving or Fast
Economical Filling, Omni-Pak® has the Right Can.
MasterBlend EZ TOUCH
®
•
•
EZ TOUCH® FAN-SHAPED
SPRAY PATTERN
Danvern EZ Touch® Fanspray® Nozzle:
- Produces a smooth, uniform fanspray finish
- Minimizes runs, drips and overspray
- 20% greater coverage than conventional
actuator
- Rotating valve nozzle changes spray
pattern
- 50% less finger fatigue than
standard valve
CONVENTIONAL SPRAY
Danvern EZ Touch®
Fanspray® Nozzle
Uniquely designed like a
professional spray gun!
Premium formulations for
solvent-based:
- Enamels
- Lacquers
- Vinyls
- Acrylics
•
Available in:
- 16oz., 12oz. and 6oz. aerosol cans
•
Male valve
DV6
B45106
DV16
B45116
•
Omni-Fill® 35 – simple to operate,
money-saving system for filling
aerosol cans with solvent-based,
air-dry enamels, lacquers, vinyls
and acrylics.
DV12
B45112
Super Omni-Fill® 100 – simple to
operate. The money-saving
system for filling large quantities
of aerosol cans with solventbased, air-dry enamels, lacquers,
vinyls and acrylics.
• The most advanced aerosol
filling system on the market
• Automatic
• Economical
• Convenient, easy set up
• Fill up to 24 cans quickly
• Self-lubricating
B10000
OMNI-FILL® 15
®
OMNI-FILL 11-EZ
FV16
B45216
SUPER OMNI-FILL® 100
• Automatic/pneumatic
• Convenient, easy set up
• Fill up to 6 cans quickly
B00035
Omni-Fill® 15 – The universal hand
pump. The money-saving system
for filling aerosol cans with your
solvent-based, air-dry enamels,
lacquers, vinyls and acrylics.
• Hand operated
• Convenient easy set up
• Simple operation
Omni-Fill® 11-EZ manual filling
system is ideal for filling a few
aerosol cans.
One-Blend*
Accepts water-reducible and
solvent-based paints
• Economical, conical spray nozzle
• Fast, efficient filling
• Available in:
- 16oz. aerosol cans only
• Female valve
OMNI-FILL® 35
Omni-Pak MasterBlend offers the ability
to handle a wide variety of solvent-based
paints and primers. No need to order
specific blends for enamels or lacquers.
Omni-Pak MasterBlend does it all.
MasterBlend
Economical, conical spray nozzle
• Fast, efficient filling
• Formulated for solvent-based:
- Enamels
- Lacquers
- Vinyls
- Acrylics
• Available in:
- 16oz. aerosol cans only
• Female valve
From one can to 100 cans, fill your own aerosols easily
and economically with the Omni-Fill® Aerosol Filling
System. Each Omni-Fill System gives you exact, custom
matched touch-up paints precisely when you need them.
These systems are versatile, allowing you to change
from one color to another quickly. They’re easy to use
and maintain, with a few simple steps.
• Hand operated
• Convenient, easy set up
• Economical
•
B15015
Omni-Pak One-Blend goes a step
further, designed specifically to fill
water-reducible paints.
AB16
B35316
*One-Blend is not suitable for use with latex paints
B11011
CHOOSE THE RIGHT FILL FOR YOU.
MASTER YOUR FILLING REQUIREMENTS.
From Large Volume Custom Colors to
Single Cans of Touch-Up Paint
Whether you Need Premium Valving or Fast
Economical Filling, Omni-Pak® has the Right Can.
MasterBlend EZ TOUCH
®
•
•
EZ TOUCH® FAN-SHAPED
SPRAY PATTERN
Danvern EZ Touch® Fanspray® Nozzle:
- Produces a smooth, uniform fanspray finish
- Minimizes runs, drips and overspray
- 20% greater coverage than conventional
actuator
- Rotating valve nozzle changes spray
pattern
- 50% less finger fatigue than
standard valve
CONVENTIONAL SPRAY
Danvern EZ Touch®
Fanspray® Nozzle
Uniquely designed like a
professional spray gun!
Premium formulations for
solvent-based:
- Enamels
- Lacquers
- Vinyls
- Acrylics
•
Available in:
- 16oz., 12oz. and 6oz. aerosol cans
•
Male valve
DV6
B45106
DV16
B45116
•
Omni-Fill® 35 – simple to operate,
money-saving system for filling
aerosol cans with solvent-based,
air-dry enamels, lacquers, vinyls
and acrylics.
DV12
B45112
Super Omni-Fill® 100 – simple to
operate. The money-saving
system for filling large quantities
of aerosol cans with solventbased, air-dry enamels, lacquers,
vinyls and acrylics.
• The most advanced aerosol
filling system on the market
• Automatic
• Economical
• Convenient, easy set up
• Fill up to 24 cans quickly
• Self-lubricating
B10000
OMNI-FILL® 15
®
OMNI-FILL 11-EZ
FV16
B45216
SUPER OMNI-FILL® 100
• Automatic/pneumatic
• Convenient, easy set up
• Fill up to 6 cans quickly
B00035
Omni-Fill® 15 – The universal hand
pump. The money-saving system
for filling aerosol cans with your
solvent-based, air-dry enamels,
lacquers, vinyls and acrylics.
• Hand operated
• Convenient easy set up
• Simple operation
Omni-Fill® 11-EZ manual filling
system is ideal for filling a few
aerosol cans.
One-Blend*
Accepts water-reducible and
solvent-based paints
• Economical, conical spray nozzle
• Fast, efficient filling
• Available in:
- 16oz. aerosol cans only
• Female valve
OMNI-FILL® 35
Omni-Pak MasterBlend offers the ability
to handle a wide variety of solvent-based
paints and primers. No need to order
specific blends for enamels or lacquers.
Omni-Pak MasterBlend does it all.
MasterBlend
Economical, conical spray nozzle
• Fast, efficient filling
• Formulated for solvent-based:
- Enamels
- Lacquers
- Vinyls
- Acrylics
• Available in:
- 16oz. aerosol cans only
• Female valve
From one can to 100 cans, fill your own aerosols easily
and economically with the Omni-Fill® Aerosol Filling
System. Each Omni-Fill System gives you exact, custom
matched touch-up paints precisely when you need them.
These systems are versatile, allowing you to change
from one color to another quickly. They’re easy to use
and maintain, with a few simple steps.
• Hand operated
• Convenient, easy set up
• Economical
•
B15015
Omni-Pak One-Blend goes a step
further, designed specifically to fill
water-reducible paints.
AB16
B35316
*One-Blend is not suitable for use with latex paints
B11011
FILLING CHART
Refer to Operators Manual for detailed filling instructions.
Part #
Item
Net Wt.
Net Wt. of
Solvent/Propellant
Suggested Strokes*
(Paint in grams/oz)
Total Package Wt.
Label Wt.
B45106
DV6
6oz
85gm / 3oz
6-8 (51gm / 1.8oz)
136gm / 4.75oz
128gm / 4.5oz
B45112
DV12
12oz
164gm / 5.8oz
9-11 (98gm / 3.5oz)
262gm / 9.25oz
255gm / 9.0oz
B45116
DV16
16oz
216gm / 7.6oz
11-13 (130gm / 4.6oz)
347gm / 12.25oz
340gm / 12.0oz
B45216
FV16
16oz
216gm / 7.6oz
11-13 (130gm / 4.6oz)
347gm / 12.25oz
340gm / 12.0oz
B35316
AB16
16oz
201gm / 7.1oz
12-14 (146gm / 5.15oz)
347gm / 12.25oz
340gm / 12.0oz
*Weigh can before and after filling to ensure correct weight.
MasterBlend is designed to accommodate most solvent-blend systems. Some lacquers may require reduction with lacquer
thinner prior to Omni-Filling. As a starting point, we recommend 5 parts lacquer to 1 part thinner by volume. Always check
the first can for application. If the spray is too coarse, additional reduction is in order. Make sure that you Omni-Fill the
specified amount required for the can size of the reduced material for the optimum aerosol package.
ACCESSORIES
Also available:
FEMALE CAN ADAPTER
For use with One-Blend and MasterBlend female aerosol cans.
• Converts Omni-Fill® 15, Omni-Fill®
35 and Omni-Fill® 100 for use
with One-Blend and MasterBlend
female cans
• Easy to use, no tools required
B15100
Female Can
• Fast, efficient filling accessory
Adapter
B14610 Plastic Liner
B14628 Pressing Tool
B14633 Check Ball (6 pack with O-Ring), not pictured
B35318 11EZ Retro Kit
B14610
(a spanner wrench
is included
with B15100)
B14628
VALVE CLEARING TOOLS
The valve clearing device enables you to clear
the spray mechanism before seating the actuator.
This accessory speeds up and simplifies the
finishing process when a number of cans are
being filled.
• Prevents clogging
• Clears valve stem
B35318
Valve Clearing Tool
Male Valve: B25217
Female Valve: B35317
©1999 The Sherwin-Williams Company (Rev.07)
(866) 519-2884 • Cleveland, OH 44128
SIS-4116A