Out of Box Setup Guide
GAS PLASMA DISPLAY
This document contains important information for initial setup and configuration of Gas Plasma displays
for use as VDT display devices. If further information is required, please contact Lottery Technical
Services.
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
1
INTRODUCTION
Welcome to the Gas Plasma Display setup guide. This document contains
information necessary to configure a new Gas plasma display for use as VDT display
device.
In this document you will find the following:
 Out of Box inspection guide
 Set up and testing for out of box test
 Diagram of Panasonic Connections
 Diagram of NEC Connections
 Menu Settings guide for Panasonic Displays
 Menu Settings guide for NEC Displays
 Packing and Shipping components
OUT OF BOX INSPECTION GUIDE
Check over the outside of each box and make note of any damage that may have
occurred during shipping. Report any damage to the Warehouse immediately!
Open the box containing the Display. Note the boxes will need to be reused for
shipping the display so keep all packaging material.
Check each box for the following accessories.
NEC
Operating Instructions Book (English)
Remote Control Transmitter (RP-109)
Batteries (AAA Battery X 2)
AC Power cord
PANASONIC
Operating Instructions Book (English)
Remote Control Transmitter (EUR646529)
Batteries (AA Battery X 2)
AC Power Cord
SETUP AND TESTING FOR OUT OF BOX TEST
To perform an OBT on the display a video feed from a VDT running Web Show will
be required for correct image adjustment. Connect a COAX video feed from the
VDT into the Video Input of the display (BCLC –HD15-02 VDT Video cable).
Connect the supplied AC power cable and power the unit on. Use the provided
diagram to locate the connections on each display.
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
2
DIAGRAM OF THE PANASONIC’S CONNECTIONS
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
3
DIAGRAM OF THE NEC’S CONNECTIONS
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
4
MENU SETTINGS GUIDE FOR PANASONIC DISPLAYS
Power up the Panasonic display, using the remote control or the menu buttons on the
front of the display adjust the settings as outlined in the following spread-sheet. For
more information about this model please read the Panasonic Operating Instructions
PDF.
Y:\Projects\Plasma Y:\Projects\Plasma
Documents\Panasonic\Panasonic
Documents\Panasonic\th42pwd5uy-oi-eng.pdf
Setup.xls
MENU SETTINGS GUIDE FOR NEC DISPLAYS
Power up the NEC display, using the remote control or the menu buttons on the front
of the display adjust the settings as outlined in the following spread-sheet. For more
information about this model please read the NEC Operating Instructions PDF.
Note: Part of the setup includes locking out the menu buttons on this display. Only
the remote control can be used to access the setup menu after the initial setting have
been saved.
Y:\Projects\Plasma Y:\Projects\Plasma
Documents\NEC\Plasma
Documents\NEC\42VP4A_manual.pdf
settings.xls
PACKING AND SHIPPING COMPONENTS
Once the display has been setup and tested. Repackage the unit in the original
shipping container. Print off a copy off a copy of the Plasma Installation Guide
PDF from Outback. The shipping container should contain the following list of
supplies.


Plasma Power cable
Plasma Installation Guide
http://w2/LSGLTS/documentation/tvmounts/Plasma%20Installation%20Guide.pdf



Assign and attach an Asset tag to the lower right side of the display
FSA adaptor plate, matching the model of Plasma to the wall or ceiling mount being shipped.
It is not necessary to send the remote controls with either display.
British Columbia Lottery Corporation
74 West Seymour Street Kamloops, BC V2C 1E2
Lottery Technical Serviceswww.bclc.com
5