SOLENOID OPERATED DIRECTIONAL CONTROLS
DE-S2G
DIRECT ACTING SPOOL, 2 WAY NORMALLY CLOSED
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, solenoid operated, 2 way normally closed, spool valve.
OPERATION
When de-energized the DE-S2G blocks flow from (1) to (2) and (2) to (1). When energized the valve allows flow
from (1) to (2) and (2) to (1).
OPERATION OF MANUAL OVERRIDE OPTION: to override, pull knob out. On the detented version, after
pulling knob out twist 180 degrees and release. The valve will remain in that position.
1
2
FEATURES
• Hardened parts for long life.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Manual override option.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
• Optional “I” Coil: Weatherproof, Thermal Shock, Immersion Safe.
Operational shift limit 8 GPM (30 LPM)
and 5 GPM (19 LPM). For shifted flow
performance consult chart. For higher flow
or pressure see HE-S2G.
HYDRAULIC SYMBOL
PERFORMANCE
VALVE SPECIFICATIONS
Actual Test Data (Cartridge Only)
Flow (LPM)
0
25
50
75
10
100
5
50
0
Pressure Drop (bar)
Pressure Drop (PSI)
150
0
0
5
10
15
20
Flow (GPM)
Port 1 to 2 (eng)
Nominal Flow 8 GPM (30 LPM) from (1) to (2)
5 GPM (19 LPM) from (2) to (1)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .26 lbs (.12 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Coil Nut Torque Requirements 4-6 ft-lbs (5.4-8.1 Nm)
Cavity DELTA 2W
Cavity Tools Kit
(form tool, reamer, tap) 40500000
Seal Kit 21191202
Port 2 to 1 (eng)
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: [email protected] • www.delta-power.com
Page SD56
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.tecnord.com
W 18 / 2017
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken
without independent study, evaluation, and testing for suitability.
Delta Power Company
SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing
Drive - Rockford,
IL 61109
SOLENOID OPERATED
DIRECTIONAL
CONTROLS
DIMENSIONS
DIMENSIONS
1.50
[38.1]
1.56
[39.6]
1.84
[46.6]
.81
[20.6]
DELTA POWER CO.
DELTA POWER CO.
.75
[19.1]
HEX NU T
.75
[19.1]
SEE COI L DATA
FOR TERMIN ATIONS
MANUA L OVERRIDE
.48
[12.2]
2.28
[58.0]
7/16-20 UNF 2 A
THREAD
STANDARD
3.35
[85.0]
.63
[16.0]
2.35
[59.6]
1.25
[31.7]
2.13
[54.1]
#8 SAE PORTS
2X
1.00 [25.4] HEX
.22
[5.6]
1.63
[41.4]
.13
[3.2]
7/8-14 UNF 2 A
THREAD
1.75
[44.5]
.28 [7.1] DIA.
MTG. SLOTS
2X
2.00
[50.8]
BODY WEIGHT: .47 lbs (.21 kg)
ORDERING INFORMATION
ORDERING INFORMATION
DE-S2G
–
DE-S2G
-
–-
-–
OPTIONS
OPTIONS
Buna
Standard 00 00
Buna
Standard
Viton
Standard V0 V0
Viton
Standard
Buna,Detent
Override 0M 0M
Buna, Override,
Viton, Override
VM
Viton, Override, Detent VM
Buna, Screen
A0
Buna,
Screen
Viton,
Screen A0 W0
Viton,Non-detent
Screen W0 B1
Buna, Override,
Buna,
Override,
Nondetent
Viton,
Override,
Non-detent B1 V1
Buna,Buna,
Screen,
Override,
Non-detent V1 B3
Override,
Nondetent
Buna, Screen,
Override,
Detent B3 B4
Buna, Screen,
Override,
Nondetent
Viton,
Screen,
Override,
Non-detent
Viton, Screen, Override, Nondetent
V3 V3
Viton, Screen, Override, Detent
V4
Buna, Screen, Override, Detent
B4
Screen,only
Override,
Note:Viton,
Use screen
if flow Detent
direction V4
is from (1) to (2).
Note: use screen only if flow
“D” COIL
TERMINATION
direction
is from
(1) to (2)
BODIES
BODIES
Without
BodyBody
Blank Blank
Without
N
S
06
12
24
36
48
25
11
22
44
(All DC Except as Noted)
“D” COIL TERMINATION
DL
Double Lead
(All DC Except
as Noted)
DT
Deutsch
on Leads DT04-2P
ML
Metri-Pack on Leads
DL Double Lead
PL
Packard on Leads
Weatherpack
DT DeutschWL
on Leads
DT04-2P on Leads
ML Metri-Pack on Leads
Coil Weight: .74 lbs (.33 kg.)
PLApproximate
Packard on Leads
WL Weatherpack on Leads
Approximate Coil Weight: .74 lbs (.33 kg)
–
-
PortsPorts
N3/8 NPTF
3/8 NPTF
PortsPorts
S#8 SAE
#8 SAE
VOLTAGE
6 VDC
12 VDC
24 VDC
VOLTAGE
0636 VDC
6 VDC
1248 VDC
12 VDC
24 VAC
24120 VAC
24 VDC
36220 VAC
36 VDC
48440 VAC
48 VDC
25 24 VAC
11
120 VAC
22 220 VAC
44 440 VAC
SS
Single Spade
DS
Double Spade
HC
DIN 43650 (Hirschman) – (AC & DC)
SS
Spade
CL Single
Conduit
Lead – (AC Only)
DI Double
Deutsch
– Integral DT04-2P
DS
Spade
HC DIN 43650 (Hirschmann) - (AC&DC)
CL Conduit Lead - (AC Only)
DI Deutsch - Integral DT04-2P
IA
ID
IJ
IAIM
ID
IJ
IM
IMMERSION PROOF “D” TYPE
“I” Coil AMP Superseal - Integral
“I” Coil Deutsch – Integral DT04-2P
IMMERSION
PROOF
“D”
TYPE
“I” Coil AMP
Jr. Timer
- Integral
“I” Coil
AMP
Superseal
- Integral
“I” Coil
Metri-Pack
– Integral
“I” Coil Deutsch - Integral DT04-2P
“I” Coil AMP Jr. Timer - Integral
“I” Coil Metri-Pack - Integral
W 18 / 2017
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein).
specific application
should
be and
undertaken
without
and testing
for specific
suitability.
WARNING:
the Any
specifications/application
data shown
in our not
catalogs
data sheets are
intendedindependent
only as a generalstudy,
guide forevaluation,
the product described
(herein). Any
application should not be undertaken
without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628
Fax: (815) 397-2526
E-mail: [email protected]
Page 71
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: [email protected] • www.delta-power.com
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: [email protected] • www.tecnord.com
Page SD57