Hot-rolled strip products
Price extras in Pounds Sterling
Effective 1 April 2015
General
This document shows price extras only.
The invoiced price comprises these extras plus basis price, distribution and tax.
Material is charged on gross weight. Lengths and widths should be specified in whole millimetres.
Unless otherwise agreed with Tata Steel, sales are carriage-paid to destination (whatever the means of
transport) and the method of carriage is at the discretion of Tata Steel.
All prices in this list are in GBP/tonne and do not include value-added tax or any other tax relating to
the sale and delivery of the goods. If delivery is within the United Kingdom, the purchaser will bear all
taxes and will reimburse Tata Steel for any taxes charged to Tata Steel in respect of the sale or delivery
of the goods.
All transactions are subject to Tata Steel UK Limited Standard Conditions of Sale.
Specifications are subject to mill acceptance and not all combinations of extras are necessarily
available. For specific information about products and their availability, please check
www.tatasteeleurope.com or consult Tata Steel.
1. Quality
1.1 Steel for drawing and cold forming
Tata Steel
EN 10111 : 2008
£/tonne
DD11
0
DD12
9
DD13
16
DD14
23
26
DD14+
Notes:
Suitability for galvanising: supplementary extra of £3/t.
1.2 High-strength low-alloy steel
Tata Steel - Tenform®
EN 10149-2 : 1996
£/tonne
XK300
-
34
XF300
S315MC
38
XK350
-
42
XF350
S355MC
48
XK400
-
54
XF400
-
58
XF420
S420MC
59
XK450
-
62
XF450
-
67
XF460
S460MC
72
XF500
S500MC
80
S550MC
90
S650MC
140
S700MC
166
1
Hot-rolled strip products price extras in GBP
Effective 1 April 2015
1.3 Carbon-manganese steel
1.4 Structural steel
Tata Steel - Tenform®
£/tonne
CMN250
39
Tata Steel
EN 10025-2 : 2004
£/tonne
n.a.
S185
0
S235JR
8
S235JR+N
13
S235J0
15
S235J0+N
20
S235J2
18
S235J2+N
23
S275JR
11
S275JR+N
23
S275J0
23
S275J0+N
28
S275J2
23
S275J2+N
35
S355JR
39
S355JR+N
44
S355J0
40
S355J0+N
45
S355J2
43
S355J2+N
48
S355K2
48
S355K2+N
53
Notes:
1. Suitability for cold forming (option C): supplementary extra of £25/t.
2. Suitability for galvanising: supplementary extra of £3/t.
3. Chemistry suitable for laser cutting: supplementary extra of £18/t.
1.5 Advanced high-strength steel
Tata Steel
prEN 10338:2009
£/tonne
HDT580X
78
HDT590F
100
Dual phase
DP600
Ferrite-bainite
FB590
Boron steel
85
HQ1500HR
1.6 Case hardening steel
1.7 High carbon steel
Tata Steel
EN 10084 : 2008
£/tonne
n.a.
C15E
31
Tata Steel
EN 10132-4:2000
£/tonne
n.a.
C55S
55
C60S
60
C67S
65
C75S
70
Tata Steel
EN 10207 : 2005
£/tonne
n.a.
P235S
44
P265S
57
n.a.
1.8 Steel for simple pressure vessels
2
Hot-rolled strip products price extras in GBP
Effective 1 April 2015
1.9 Steel for pressure vessels
1.10 Steel for gas cylinders
1.11 S
hip plate (with testing by and
certificate from)
Tata Steel
EN 10028-2 : 2009
£/tonne
n.a.
P235GH
48
P265GH
57
Tata Steel
EN 10120 : 2008
£/tonne
n.a.
P245NB
28
P265NB
35
Tata Steel
Lloyds Register of Shipping Germanischer Lloyds
£/tonne
n.a.
Grade A
22
Grade A
40
Grade B
2. Floor Plate
2.1 Durbar®
£/tonne
Durbar pattern
30
Thickness ≤ 4mm
9
Width <1250mm
6
Notes:
1The price of Durbar is composed of the basis price, the extra for grade and dimension and the extra shown in
this table, plus any appropriate extras that follow.
2 Durbar meets the requirements for mechanical properties specified by EN 10025-2 : 2004.
3. Dimensions
3.1 Thickness and width: coils
Thickness (mm)
Width (mm)
≥900
<1000
≥1000
<1100
≥1100
<1300
≥1300
≤1550
>1550
≤1830
>1830
≤2070
≥
<
£/tonne
1.40
1.50
49
49
49
-
-
-
1.50
1.75
47
44
44
44
-
-
1.75
1.85
39
36
30
30
40
-
1.85
2.00
35
29
23
27
37
-
2.00
2.50
28
23
20
20
35
45
2.50
3.00
25
21
17
17
24
34
3.00
4.00
23
20
15
15
23
33
4.00
7.00
21
17
14
14
20
30
7.00
10.00
25
21
17
17
25
35
10.00
12.00
27
24
21
21
28
38
12.00
15.00
37
33
25
25
30
40
15.00
≤20.00
39
35
27
27
32
42
Notes:
1Where dimensions are specified as a range, a maximum (with all tolerances under) or a minimum (with all
tolerances over), the extras applicable are those for the mean of the range as specified or implied.
2 Other dimensions available on request.
4. Pickling and oiling
4.1 Thickness and width: coils
Thickness (mm)
Width (mm)
<1000
≥1000
>1550
≤1550
≤2070
≥
<
£/tonne
1.50
1.75
40
34
44
1.75
2.00
40
34
44
2.00
5.00
38
30
40
5.00
≤6.35
38
30
40
Notes:
Available from Newport basing point only.
3
Hot-rolled strip products price extras in GBP
Effective 1 April 2015
4.2 Supplementary price extra
£/tonne
7
For tensile strength ≥ 470 Mpa (≥S420MC ; ≥S355J/K ; ≥L415MB)
4.3 Surface treatment
£/tonne
5
Special oil
Notes:
Applied in addition to pickling and oiling extras when specified.
5 Dimensional tolerances
5.1 Thickness tolerances
EN 10051 : 2010
£/tonne
Normal
0
3/4 normal
2
2/3 normal
3
1/2 normal
6
Other
10
Notes:
1/2 tolerances are not available with specification EN 10111 : 2008
5.2 Width tolerances & side trimming
(pickled coil only)
EN 10051 : 2010
£/tonne
Normal (Mill Edge)
0
Special / outside EN 10051 : 2010 (Side Trimmed Last)
13
5.3 Low crown
Re≤360MPa
Re>360MPa
£/tonne
No crown specified
0
0
≤50µm
13
21
≤30µm
17
on request
Notes:
Crown values at C40 measurement position.
6 Quantity
6.1 Coil weights
Max Coil Weight Width (mm)
≥900
<1000
≥1000
<1100
≥1100
<1200
≥1200
<1300
≥1300
<1400
≥1400
<1500
≥1500
<1600
≥1600
<1700
≥1700
<1800
≥1800
≥
<
£/tonne
10
11
12
12
14
9
14
14
9
9
9
9
11
12
11
12
12
9
12
14
9
9
9
9
12
13
11
11
12
9
12
12
9
9
9
9
13
14
11
11
11
9
12
12
2
9
9
9
14
15
11
11
11
6
11
12
2
2
9
9
15
16
11
11
11
6
11
11
2
2
2
2
16
18
11
11
11
6
11
11
6
2
2
2
18
20
0
0
11
6
11
11
6
6
6
6
20
22
0
0
11
0
11
11
6
6
6
6
22
24
0
0
0
0
11
11
6
6
6
6
24
25
0
0
0
0
0
11
6
6
6
6
25
28
0
0
0
0
0
0
6
6
6
6
28
30
0
0
0
0
0
0
0
0
6
6
0
0
0
0
0
0
0
0
0
0
30
Notes:
1 Coils are sold on maximum weight only.
2 A coil weight range must be agreed with Tata Steel before placing an order.
3 The minimum specifiable coil weight is 10 tonnes.
4
Hot-rolled strip products price extras in GBP
Effective 1 April 2015
6.2 Order quantity per order item
Quantity (tonnes)
≥
Tata Steel tolerance
£/tonne
<
±10%
0
40
100
±20%
0
20
40
±20%
5
100
Notes:
1An order item is a quantity of material specified in one order of which the specification (grade, dimension, etc)
delivery time and destination is the same.
2 The minimum order item quantity is 20 tonnes.
3 Material should be ordered in quantities that are multiples of whole coils.
4Tata Steel will seek to supply the nearest number of whole coils to meet the ordered quantity or a quantity that
is within the tolerances shown.
5Where quantity is specified as a range, a maximum (with all tolerances under) or a minimum (with all tolerances
over), the extras applicable are those for the mean of the range as specified or implied.
6.3 Welds
£/tonne
If recoiling welds are not accepted
3
7 Testing and inspection
7.1 Test certificates
£/tonne
to EN 10204 : 2004
Declaration of compliance with order - type 2.1
0
Test report (cast analysis only) - type 2.2
1
Inspection certificate (cast analysis and mechanical properties
based on specific testing) - type 3.1
4
Other tests, not mentioned in EN 10204 : 2004
on request
8 Other extras
8.1
£/tonne
Fit for specific application
Surface critical applications (exposed)
18
Safety critical parts (safety parts)
18
9 Packaging
9.1
£/tonne
0
Plain banded
www.tatasteeleurope.com
Tenform® and Durbar® are trademarks of Tata Steel.
Tata Steel
PO Box 10.000
1970 CA IJmuiden
The Netherlands
T: +31 (0) 251 496126
E: [email protected]
IS:04/2015
Care has been taken to ensure that this information is accurate, but Tata Steel,
including its subsidiaries, does not accept responsibility or liability for errors or
information which is found to be misleading.
Tata Steel reserves the right to change this information at any time without prior
notice. The online version will take precedence over the printed version at any
moment in time.
Copyright 2015
Tata Steel Europe Limited