Status 5/2015
Technical Datasheet
carcass
Subject to change
top cover
s
2
S
1
s
3
bottom cover
Type: TransConti 20/2, 2+1 mm, NQ, cut edges
1.
1.1.
1.2.
1.3.
1.4.
BELT SIZES
Width
Thickness
Number of Plies
Belt Weight
2.
2.1.
2.2.
2.3.
BELT CHARACTERISTIC
Breaking Strength
Elongation at Break
Reference Elongation
DIN 22 102
DIN 22 102
DIN 22 102
3.
3.1.
3.2.
3.3.
3.4.
3.5.
3.6.
3.7.
COVER RUBBER
Thickness of Top Cover
Thickness of Bottom Cover
Tensile Strength
Elongation at Break
Hardness
Abrasion
Density
DIN 22 102
DIN 22 102
DIN 53 504
DIN 53 504
DIN 53 505
DIN 53 516
DIN 53 479
4.
4.1.
4.2.
4.3.
ADHESION
Top cover/Ply
Between the plies
Bottom Cover/Ply
DIN 22 102
DIN 22 102
DIN 22 102
DIN 22 102
DIN 22 102
DIN 22 102
max.
appr.
appr.
2000
5,5
2
6,7
mm
mm
mm
kg/m²
min.
min.
max.
200
10
1,5
N/mm
%
%
Y acc. to DIN 22 102
2
1
23
550
60
100
1,14
min.
min.
min.
4,5
5,0
4,5
±3
± 100
±5
± 30
±0,02
mm
mm
2
N/mm
%
Shore A
mm3
g/cm3
N/mm
N/mm
N/mm
The content of this publication is not legally binding and is provided as information only. The trademarks displayed in this publication are the property of Continental AG and/or its affiliates.
Copyright © 2014 ContiTech AG. All rights reserved. For complete information go to: www.contitech.de/discl_en
Conveyor Belt Group
ContiTech Transportbandsysteme GmbH
D-37154 Northeim · Phone: +49 (0)5551 702-8396
[email protected]