CONFORM™ Cube
REHYDRATION TECHNIQUE – SYRINGE
1. PRE‐OP PLANNING
2. PREPARATION
3. PERFUSION
• Order appropriately sized CONFORM Cube (1‐2 mm larger than height of spacer when placing in lumen of spacer)
• Place tissue in syringe barrel and replace plunger
• Perfuse implant by gently pumping the plunger 5‐10 times, holding a vacuum for 1‐2 seconds each time
• Order PROCURE™ Marrow Aspiration Kit or obtain appropriately sized syringe
• Add appropriate amount of hydration fluid to syringe (see chart below)
________________________________
• Attach end cap or valve onto syringe
NOTE: Effective perfusion should create small air bubbles around the tissue when creating a vacuum
4. IMPLANTATION
HYDRATION FLUID VOLUME
ORDERING INFORMATION
• Rehydration typically complete within 5 minutes
CONFORM Cube
Customer Service (800) 522‐9069
• Obtain corresponding syringe end cap or valve
SYRINGE
CONFORM Cube
Syringe, 20 ml
9, 11, 13 mm
Syringe, 30 ml
15, 17 mm
_______________________________________
NOTE: PROCURE Marrow Aspiration Kit
contains a 20 ml syringe
• Remove tissue from the syringe and place into bony defect or lumen of spacer
Hydration Fluid*
9 mm (Syringe, 20 ml) 11 mm (Syringe, 20 ml)
13 mm (Syringe, 20 ml)
15 mm (Syringe, 30 ml)
17 mm (Syringe, 30 ml)
2 ‐ 5 ml
2 ‐ 5 ml
2 ‐ 5 ml
5 ‐ 10 ml
5 ‐ 10 ml
* Recommended hydration fluid volume is based on recommended syringe size and a single cube.
CONFORM™ Cube Rehydration Technique ‐ Syringe | DJ10774A | 01/2013
CONFORM Cube
011009 CONFORM Cube, 9 mm (0.7 cc)
011011 CONFORM Cube, 11 mm (1.3 cc)
011013 CONFORM Cube, 13 mm (2.2 cc)
011015 CONFORM Cube, 15 mm (3.4 cc)
011017 CONFORM Cube, 17 mm (4.9 cc)
PROCURE Choice
710.150.99S 11 gauge x 15 cm, multi‐port
710.151.99S 11 gauge x 15 cm, single‐port
710.111.99S 11 gauge x 11 cm, multi‐port
CONFORM is a trademark of the Musculoskeletal Transplant Foundation. PROCURE is a trademark of Synthes, Inc. or its affiliates.