DelftDI
Adora DRFi
An advanced hybrid
imaging solution
combining both static
and dynamic X-ray
imaging capabilities
DelftDI Adora RF has
been designed to provide
all the benefits of a direct
digital Auto-Positioning
Radiography system with
the added bonus of
Fluoroscopy in a single,
multi-purpose general
X-ray room.
l Intelligent workflow for high volume patient
throughput
l Full APR auto-positioning – no manual handling
l Up to 1000 auto-positions
l Smart handle motorized movement, zero force
l Intuitive tube head control
l Acquisition station with large DICOM calibrated
touchscreen display
l Canon RF acquisition software with generator
integration
l Extensive portfolio of Canon CXDI Flat Panel
Detectors
l High resolution, 160µm pixel pitch
l High sensitivity
l Sophisticated Image processing for highest
diagnostic value
l Non RF detectors are changeable
Specifications Detector (depending on configuration)
CXDI-50RF
Purpose Multi Purpose Radiography / Fluoroscopy
Scintillator CsI (Cesium Iodide)
Effective imaging area 430 mm x 350 mm
Resolution
3.2 lp/mm
DQE
>70%
Gray scale 4096 gradations
Pixel size
160 x 160 μm
Image matrix size 2208 x 2688 pixels
Dimensions sensor
± 493 x 503 x 26 mm
Weight sensor
5.7 kg
Acquisition mode
Up to 30 fps
Cooling
Active air cooling
Grid
Fixed grid
Specifications X-Ray generator Type, Indico 100, 150 kV / 80kW
Rating KV range
KV accuracy
Risetime (10-90%) Exposure Time range mAs range
mAs accuracy
mA range
Serial radiography rate •
•
•
•
•
•
•
•
•
80 kW (65 kW optional in the future)
40 to 150 kV. (radiography) / 40 to 125 kV. (fluoroscopy)
+/- 5% + 1 kV over full kV range / +/- 2%+ 1kV from 70 to 85 kV
< 0.5 ms
1 ms – 6300m s (detector dependent)
0.1 - 1000 mAs RAD, Non-AEC
+/- 10% + 0.2 mAs at > 4ms
10–1000 mA (Rad) – 10 to 80 mA (pulsed fluoroscopy)
Up to 15 fps
Specifications X-Ray tube & Collimator
X-Ray tube
• 350 kHU high capacity
• 0,6/1,0 focal spot
• 12 degrees target angle 150 kV
•Dual-speed
Collimator type
• Fully automatic, motorised with manual override
Rotation
• +/- 180 motorised
Spectral filtration
• 1.0mm Al + 0.1mm Cu, motorised,pre-programmable
1.0mm Al + 0.2mm Cu, motorised, pre-programmable
Collimation • Motorized square collimation – pre-programmable or controllable via SmartHandle
Light Field • Timer-controlled after last system movement. Adora system light dims when the collimator light is active.
• 2.0mm Al, motorised, pre-programmable
• DAP integration
Specifications Ceil stand
• Motorized vertical column up to 1600 mm at 3000 mm
ceiling height
• Fully automatic positioning with 999 APRs
• Smart Handle with smooth power -assisted movements
• Tube rotation
+/- 120° around vertical axis
+/- 120° around horizontal axis
• Detector rotation
+/- 120° around vertical axis
+/- 120° around horizontal axis
+ 90° in z-axis
• Ceiling unit rotation
+/- 180° at 4-22°/sec
• Ceiling Unit Movement 3-25 cm/sec in rails
• Full automatic stitching (optional)
Specifications Table
•
•
•
•
•
•
DelftDI
A CANON COMPANY
Max patient load
Motorized vertical travel Table top dimension Longitudinal Movement Transverse Movement Usefull radiographic area 250kg evenly distributed load
510 – 860mm
2930mm x 700mm
+/- 10 cm manual floating
+/- 20 cm manual floating
2000mm x 700mm
Wiltonstraat 41, 3905 KW Veenendaal, The Netherlands
T +31 318 583 400 F +31 318 583 401 E [email protected] I www.delftdi.com