www.suretek.com.au
Security Innovations Sooner
MULTICOM 5 PLUS
UP TO CLASS 5 AS2201.5
ETHERNET | GPRS | GSM | PSTN | PFP COMMUNICATOR
The Multicom 5 Plus (MC5P) is an alarm communicator
that redefines the way alarm systems communicate and
authenticate alarms. The primary function of the MC5P
is to act as a back-up and monitoring device for the
entire alarm system, or a reliable communications link
for monitoring or control in a wide range of applications.
The MC5P communicates across five transmission paths,
including GPRS, GSM, PSTN, Ethernet and PFP, and
does so simultaneously, so if one path fails the MC5P
automatically and transparently transmits across one of the
remaining transmission paths, providing constant reliable
communication. It’s the ideal offering for:
•
•
•
•
High-risk clients
High rise buildings
Commercial and industrial properties
Large residential estates and campuses
Low maintenance & intelligent
The Multicom 5 Plus has been designed and built in Australia
from the highest quality componentry. It’s reliable, intelligent
and maintenance free - guaranteed.
The most affordable panel in its class
We believe price shouldn’t compromise quality. That’s why
we’ve created an affordable panel with true quality and
workmanship. We’re proud to offer you a communications
panel of this calibre, with twice the performance, at half the
cost.
Inteliswitch Wireless Power Control
The MC5P manages client network infrastructure resulting in
maximum network availability. It wirelessly monitors & power
cycles your client’s network equipment (modems & routers)
in the event of network drop-out.
Perfect for the Highest Security Applications
• True plug and play with Bluetooth configuration
capabilities
•
On-board Ethernet and Inteliswitch for auto power cycle
& modem reboot
•
Concurrent alarm transmission and polling paths
including GPRS, PSTN, GSM, Ethernet and PFP
•
99.99% network uptime
•
Meets class 1, 2, 3, 4 and 5 of Australian Standard
AS2201.5 2008
•
Connects to any security system reporting ContactID
•
Uses Australia’s leading high-security Private Network
•
Secure, managed and supervised 24/7 with emergency
support hotline
KEY SPECIFICATIONS
Communication Paths
GPRS
Contact ID via GSM
Contact ID via PSTN
Ethernet (10/100 FEC)
PFP (Poll fail protocol via the GSM network)
SMS
Serial
Bluetooth (Wireless Programming interface
with easy Multicom Programming interface)
Wireless Power Point Control
Reporting Format
Contact ID
Surepoll
PFP
Inputs
4 x 24hr alarm inputs with programmable
End-of-Line Resistors (EOLR)
Dedicated Tamper Input
Output Devices
2 x programmable dry relay contact for
system trouble or automation outputs
Wireless Power Point Control
12V Auxiliary Output (200mA poly Fuse)
Indicators
Signal, Communications, Fault and PSTN
LED’s
Quad GSM band
800/900/1800/1900 MHz
Remote Software Update
Full remote programming and management of software / firmware via GPRS / Ethernet
Options
2 x Programmable IO for Custom applications
Analogue inputs for Signal Level Monitoring
Emergency Phone Backup (PSTN to GSM
Conversion)
Serial Programming Cable
Expansions
On-board Expansion Interface, hardwired and
Bluetooth
Backup Supply
12V 7Ah with three stage charger
Power Supply
16Vac, 50Hz Adaptor
Approval
N28785
Enclosure
Tamper proof 1.3mm steel
Dimensions
H 265mm W 310mm D 65mm
Alarm Reporting
PSTN Fault (programmable Time)
AC Fault (programmable Time)
Zone 1 to 4 (24 hour)
Tamper
Alarm Reporting
GPRS/GSM/Ethernet Fault (optional)
Test report (programmable)
Programming Update / Access
Alarm Communication Fault
Zone Lockout (optional)
Multicom Power Point Cycle