TX500 HMI / PLC Series
Plug-in Modules
20 DI, 12 DO 0.5 A ,8 AI (U, I, RTD, TC), 4 AO (U, I)
TX-IO-XX03
■ Plug-in expansion module for use with
HMIs of the TX500 product series
■ I/O Modules
■ 20 digital inputs, 24 VDC, PNP
■ 12 digital outputs, 24 VDC, 0.5 A, PNP
■ 8 analog inputs, U, I, RTD, TC
■ 4 analog outputs, U, I
Type designation
Ident no.
TX-IO-XX03
6828201
Supply
Supply voltage
Admissible range
System power supply
Voltage supply connection
Electrical isolation
24 VDC
12…30 VDC
From the HMI
Pluggable strip with cage clamp terminals
optical, 1500 Vrms
Digital inputs
Number of channels
Connectivity inputs
Input type
Low level signal voltage
High level signal voltage
Low level signal current
High level signal current
Input delay
Sensor supply
Potential separation
20
3 pluggable strips with cage clamp terminals
10-pin, 3.5 mm pattern
(Weidmueller - Omnimate BLZF 3.5/180F)
PNP
<6V
> 12 V
< 1 mA
> 3 mA
0.05 (on S inputs), 0.0002 (on E inputs) ms
24 VDC
1500 Vrms
Analog inputs
Number of channels
Operating modes
Resolution
Basic fault limit at 25 °C
8 Single-Ended / 4 Differential
Current, voltage, resistance, thermocouple
12 bit
0.1 %
Edition • 2017-05-28T03:38:58+02:00
Operating mode voltage
Max. input voltage
Input signal types
Measuring range
Linearität
Basic error at 25 °C
Repeat accuracy
15 V
8 single ended / 4 differential
+/-100 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V,
0 … 1 V, 0 … 10 V
0.1 %
0.1 %
0.2 %
Operating mode current
Max. Eingangsspannung
Max. input current
Load resistance
Input signal types
Measuring range
Linearität
Basic error at 25 °C
15 V
20 mA
200 ò
4 differential inputs, externally powered
0…20 mA, 4…20 mA
0.1 %
0.1 %
1/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
TX500 HMI / PLC Series
Plug-in Modules
20 DI, 12 DO 0.5 A ,8 AI (U, I, RTD, TC), 4 AO (U, I)
TX-IO-XX03
Operating Mode RTD/Resistance
Temperature scale
Measuring range
Connection type
measurement current
Repeat accuracy
Operating Mode Thermocouple
Temperature scale
Measuring range
Cold junction compensation
Basic error at 25 °C
Digital outputs
Number of channels
Connection Technology Outputs
Output type
Output voltage
Output current per channel
Simultaneity factor
Output delay
Short-circuit protection
Actuator power supply
Potential separation
Edition • 2017-05-28T03:38:58+02:00
Analog outputs
Number of channels
Operating modes
°Degree Celsius, °Fahrenheit
-100 … 850 °C
2-, 3-, 4-wire
1.2 mA
0.1 %
µV
E (-270…1000 °C),
J (-210…760 °C),
K (-270…1370 °C),
R (0…1768 °C),
S (0…1768 °C),
T (-270…400 °C)
External via Pt100 comp. Input (CN4 Pin 1-5)
0.1 %
12
2 steckbare Federzugklemmleisten
10 pol., 3,5 mm Raster
( Weidmueller - Omnimate BLZF 3.5/180F)
PNP
24 VDC
0.5 A
0.23
0.15 ms
yes
24 VDC externally fed
1500 Vrms
Resolution
4
+/-100 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V,
0 … 1 V, 0 … 10 V
+/-2 mA, +/-10 mA, +/-20 mA
12 bit
Operating mode voltage
Load resistor
Output signal type
Output signal range
Linearität
>1 kò
Single-ended
+/-10 V
0.15 %
Operating mode current
Load resistor
Output signal type
Output signal range
Linearität
<470 ò
Active
0…20 mA
0.2 %
Standard/Directive conformity
Approvals and certificates
CE
General Information
Dimensions (W x L x H)
Protection class
Housing material
Housing color
Mounting
125.2 x 89.3 x 33.7mm
IP20
Metal
Silver
On HMIs of the TX500 series
2/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
TX500 HMI / PLC Series
Plug-in Modules
20 DI, 12 DO 0.5 A ,8 AI (U, I, RTD, TC), 4 AO (U, I)
TX-IO-XX03
Analog Inputs
Analog Inputs
Analog Outputs
Cold Junction Compensation (Pt100) and Power Supply Digi-
Pin Assignment CN1
Pin Assignment CN2
Pin Assignment CN3
Pin Assignment CN4
tal I/O
Pin Assignment CN5
Edition • 2017-05-28T03:38:58+02:00
Digital inputs
3/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
TX500 HMI / PLC Series
Plug-in Modules
20 DI, 12 DO 0.5 A ,8 AI (U, I, RTD, TC), 4 AO (U, I)
TX-IO-XX03
Digital inputs
Digital Inputs and Outputs
Pin Assignment CN7
Pin Assignment CN8
Edition • 2017-05-28T03:38:58+02:00
Digital Outputs
Pin Assignment CN6
4/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com