newton
NEWTON – NEWTON CT
“PERSON ON BOARD” option
is now also available
World-class single stage scissor lift designed for transporting vehicles or
other loads floor to floor up to a height of 4 metres. A sturdy structure with self
lubricating bushings and sliding blocks grants no load deformation and ensures
a very long lifetime. Lifting capacities range from 3000kgs to 5000kgs.
The main feature is that the whole lift can be taken down to pieces, thus enabling
it to be easy transported and installed in narrow spaces or into old city centres.
The lift requires an extremely shallow pit (just 36cm) making it ideal for those
places where there are digging problems. Little building works are needed as
there is no need of wall anchors.
The lift can be equipped with a roof that covers the access hole (Newton CT version).
The system takes advantage of a telescopic roof structure allowing the roof to rise
with the car platform from the basement; when the lift is instead lowered into the
basement the roof separates from the platform. In this way lifting heights of up
to 4,000mm represent no longer a problem for the deck structure. The roof can
be prepared for special finishes the client may choose (tiles, artificial or synthetic
grass, mosaics, etc). A galvanised pit frame to be placed around the shaft opening
for collecting water is provided with for outdoor use.
This lift is definitely a vanguarding lift, which is designed to meet the most
demanding clients’ expectations.
SAFETIES
Slowdown switches
Overcenter stop valves (against falling) fitted on the dual cylinders
Low tension controls with “Dead Man” push buttons and key
Emergency stop
Electric locks for controlling landing doors
(Optional) Vehicle positioning control photocells
(Optional) Vehicle presence control photocells
(Optional) Auxiliary battery in case of power failure
Via Stazione 119C s 30035 Ballò di Mirano (VE)
[email protected] s www.ecospace.it
s
T. +39 041 4196340
s
F. +39 041 5131513
newton
NEWTON SCISSOR CAR PARKING PLATFORM LIFT SPECIFICATION
Shaft:
Platform:
Pit depth:
Travel:
Capacity:
Framework and platforms:
Speed:
Motor:
Tension:
Mass:
Hydraulic unit:
Control panel:
Button boards:
Safeties:
Lift movements:
Floor switch:
When platform is in motion:
Warranty:
5380 x 2730 mm.
5300 x 2650 mm.
360 mm.
3000 – 4000 mm
3000 – 5000kgs
Epoxy powder coating (RAL grey colours
7016 e 9006).
6 cms/sec.
from 5.5kw to 11kw
400V triphase
3500 kgs (base version)
550x700 H 1000 mm.(to be placed in the
machine room)
200x400 H 500 mm. (preset for connecting
safety devices and door locks)
100x100 H 200 mm. (with emergency
button and extractable key)
Emergency Stop
“Dead man” controls with extractable key
Electric type, adjustable to fit floor level
On floor flashing light
2 years on parts
OPTIONS
Platform dimensions:
Transiting roof cover:
Pit frame for collecting water:
Finish
Doors, gates and platform:
Flashing lights:
Auxiliary battery:
Max 6000x3000 mm; oversize dimensions
available on request
Suitable for tiles (<70kgs m2)
Hot galvanised metal plates
Hot galvanic coating
Automatic landing doors
Fire resisting doors
Anti-intrusion photocells barrier
Vehicle positioning control photocells
Vehicle presence control photocells
Underplatform safety edge (pneumatic type)
For any eventual extra floor
In case of power failure (black out)
DOCUMENTS TO BE PROVIDED WITH THE LIFT
š EC conformity declaration
š Users manual
š Hydraulic and wiring diagram