FlexXXL product sheet
FlexXXL
Extra large support for flat roofs
• Testable structural analysis according to the latest standards
• Universally applicable
• Mounting without drilling
• Minimal material usage
• Optional inclinations 15°, 20°, 25°
The market for photovoltaic plants has been undergoing a process
of permanent professionalisation throughout the last years. This
becomes obvious due to the fact that an increasing number of photovoltaic plants on roofs of industrial buildings require 100% structural
analyses which have to meet the standards that are expected by
inspecting structural engineers.
Description
The FlexXXL support is the logical further development of our wellproven FlexConsole support. With FlexXXL, a beam length of 5.2
meters is possible.
Optimally suitable for several configurations like
• 3 vertical modules with a height of 1.7 meters
• 5 horizontal modules with a width of 1 meter
• 4 vertical First Solar modules
• 8 horizontal First Solar Module and other configurations
Mounting example
For an optimum load transfer, the support must be loaded respectively screwed at the bottom beam at four spots.
The module bearing profiles can be fastened quickly and conveniently using our KlickTop system.
5205 mm
54
30
mm
© Schletter GmbH • Gewerbegebiet an der B15 • Alustraße 1 • 83527 Kirchdorf/Haag i. OB • Germany • Phone: +49 8072 9191-200
Fax: +49 8072 9191-9200 • E-mail: [email protected] • www.schletter.eu • updated 04/2011 • subject to change without notice
1/2
FlexXXL product sheet
Accessories for the FlexXXL mounting beam
For the fastening of the cross beam to the mounting
beam, the KlickTop cross connector M8 is required.
129004-000
(430 520-m8)
KlickTop cross connector kit M8
with bolt, Klick and square nut for Klick groove M8
for cross rail system Standard
 GridNorm product sheet
Technical data
Material
Supports: Aluminum EN AW 6060 T6 F25 or EN AW 6063 TF / AlMgSi 0.5, F25;
Fastening material: Quality steel 1.4301
Item number
155102-001
155102-002
155102-003
Flat roof support FlexXXL 5.4m 15 degrees
Flat roof support FlexXXL 5.4m 20 degrees
Flat roof support FlexXXL 5.4m 25 degrees
Structural analysis
and loading
System structural analysis according to DIN 1055, part 4 (03/2005), part 5 (06/2005),
Eurocode 1 (available on the internet in the form of charts)
© Schletter GmbH, 2011, I400177GB, V1
Get all system prices fast and easy with our auto-calculator!
Further information at www.schletter.eu
2/2
© Schletter GmbH • Gewerbegebiet an der B15 • Alustraße 1 • 83527 Kirchdorf/Haag i. OB • Germany • Phone: +49 8072 9191-200
Fax: +49 8072 9191-9200 • E-mail: [email protected] • www.schletter.eu • updated 04/2011 • subject to change without notice