TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-571 • 16mm
designed for the harsh demands of industrial inspection applications
and are ideal for use in factory automation, inspection or qualification.
These fixed focal length lenses feature a locking focus and iris rings to
prevent unwanted adjustments, and a front filter thread for integrating
standard optical filters.
Focal Length:
Minimum Working Distance :
1
Focus Range1 (lockable):
16mm
Aperture (f/#):
100mm
Magnification Range:
100mm – ∞
Length at Near Focus:
60.4mm
Length at Far Focus:
57.8mm
Filter Thread:
M46 x 0.75mm
Max. Sensor Format:
Sensor Size
Field of View
3
Distortion2:
<5%
Object Space NA2:
0.02
No. of Elements (Groups):
9 (7)
1/2.5”
1/2”
1/1.8”
2/3”
43.4mm - 19.9˚
48.8mm - 22.3˚
55.0mm - 25.0˚
67.5mm - 30.4˚
3. Horizontal FOV on standard 4:3 sensor format
Figure 1: Distortion at the maximum sensor format. Postive values correspond to pincushion
distortion, negative values correspond to barrel distortion.
1/4λ MgF2 @550nm
Weight:
C-mount
1. From front of housing 2. At 200mm W.D.
0X – 0.13X
AR Coating:
1”
Camera Mount:
f/1.8 - f/16, lockable
195g
Sony 2/3” *
1”
1” Sq †
4/3”
64.7mm - 29.2˚
99.9mm - 43.4˚
87.1mm - 38.5˚
NA
1” 1:1 aspect ratio sensor *6:5 aspect ratio
†
Specifications subject to change
Figure 2: Relative illumination (center to corner)
In both plots, field points corresponding to the image circle of common sensor formats are included. Plots represent theoretical values from lens design software. Actual lens performance varies due to
manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Our TECHSPEC® High Resolution Lenses for 1” and 4/3” Sensors are
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-571 • 16mm
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 200mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-571 • 16mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 200mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-571 • 16mm
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 500mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-571 • 16mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 500mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-572 • 25mm
designed for the harsh demands of industrial inspection applications
and are ideal for use in factory automation, inspection or qualification.
These fixed focal length lenses feature a locking focus and iris rings to
prevent unwanted adjustments, and a front filter thread for integrating
standard optical filters.
Focal Length:
Minimum Working Distance :
1
Focus Range1 (lockable):
25mm
Aperture (f/#):
150mm
Magnification Range:
150mm – ∞
Length at Near Focus:
45.3mm
Length at Far Focus:
45.3mm
Filter Thread:
M34 x 0.5mm
Max. Sensor Format:
Sensor Size
Field of View
3
Distortion2:
<2.5%
Object Space NA2:
0.031
No. of Elements (Groups):
7 (6)
1/2.5”
1/2”
1/1.8”
2/3”
36.3mm - 13.0˚
40.8mm - 14.6˚
45.9mm - 16.4˚
56.2mm - 20.0˚
3. Horizontal FOV on standard 4:3 sensor format
Figure 1: Distortion at the maximum sensor format. Postive values correspond to pincushion
distortion, negative values correspond to barrel distortion.
1/4λ MgF2 @550nm
Weight:
C-mount
1. From front of housing 2. At 200mm W.D.
0X – 0.16X
AR Coating:
1”
Camera Mount:
f/1.8 - f/22, lockable
113g
Sony 2/3” *
1”
1” Sq †
4/3”
54.0mm - 19.2˚
82.5mm - 28.7˚
72.2mm - 25.4˚
NA
1” 1:1 aspect ratio sensor *6:5 aspect ratio
†
Specifications subject to change
Figure 2: Relative illumination (center to corner)
In both plots, field points corresponding to the image circle of common sensor formats are included. Plots represent theoretical values from lens design software. Actual lens performance varies due to
manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Our TECHSPEC® High Resolution Lenses for 1” and 4/3” Sensors are
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-572 • 25mm
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 200mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-572 • 25mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 200mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-572 • 25mm
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 500mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-572 • 25mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 500mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-573 • 35mm
designed for the harsh demands of industrial inspection applications
and are ideal for use in factory automation, inspection or qualification.
These fixed focal length lenses feature a locking focus and iris rings to
prevent unwanted adjustments, and a front filter thread for integrating
standard optical filters.
Focal Length:
35mm
Aperture (f/#):
Minimum Working Distance1:
200mm
Magnification Range:
Focus Range1 (lockable):
200mm – ∞
Length at Near Focus:
66mm
Length at Far Focus:
60mm
Filter Thread:
Sensor Size
Field of View
3
Distortion :
<2%
Object Space NA2:
0.029
No. of Elements (Groups):
7 (6)
AR Coating:
1”
Camera Mount:
1/2.5”
1/2”
1/1.8”
2/3”
36.0mm - 9.3˚
40.5mm - 10.4˚
45.5mm - 11.7˚
55.75mm - 14.3˚
3. Horizontal FOV on standard 4:3 sensor format
Figure 1: Distortion at the maximum sensor format. Postive values correspond to pincushion
distortion, negative values correspond to barrel distortion.
1/4λ MgF2 @550nm
Weight:
C-mount
1. From front of housing 2. At 300mm W.D.
0X – 0.16X
2
M37 x 0.75
Max. Sensor Format:
f/1.8 - f/16, lockable
252g
Sony 2/3” *
1”
1” Sq †
4/3”
53.5mm - 13.7˚
81.6mm - 20.6˚
71.5mm - 18.2˚
NA
1” 1:1 aspect ratio sensor *6:5 aspect ratio
†
Specifications subject to change
Figure 2: Relative illumination (center to corner)
In both plots, field points corresponding to the image circle of common sensor formats are included. Plots represent theoretical values from lens design software. Actual lens performance varies due to
manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Our TECHSPEC® High Resolution Lenses for 1” and 4/3” Sensors are
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-573 • 35mm
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 300mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-573 • 35mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 300mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-573 • 35mm
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 750mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-573 • 35mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 750mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-574 • 50mm
designed for the harsh demands of industrial inspection applications
and are ideal for use in factory automation, inspection or qualification.
These fixed focal length lenses feature a locking focus and iris rings to
prevent unwanted adjustments, and a front filter thread for integrating
standard optical filters.
Focal Length:
50mm
Aperture (f/#):
Minimum Working Distance1:
200mm
Magnification Range:
Focus Range1 (lockable):
200mm – ∞
Length at Near Focus:
72.6mm
Length at Far Focus:
60.5mm
Filter Thread:
Sensor Size
Field of View
3
Distortion :
<1%
Object Space NA2:
0.026
No. of Elements (Groups):
7 (5)
AR Coating:
4/3”
Camera Mount:
1/2.5”
1/2”
1/1.8”
2/3”
23.5mm - 6.5˚
26.3mm - 7.3˚
29.6mm - 8.2˚
36.3mm - 10.1˚
3. Horizontal FOV on standard 4:3 sensor format
Figure 1: Distortion at the maximum sensor format. Postive values correspond to pincushion
distortion, negative values correspond to barrel distortion.
1/4λ MgF2 @550nm
Weight:
C-mount
1. From front of housing 2. At 500mm W.D.
0X – 0.25X
2
M37.5 x 0.5
Max. Sensor Format:
f/1.8 - f/16, lockable
295g
Sony 2/3” *
1”
1” Sq †
4/3”
34.8mm - 9.7˚
52.9mm - 14.6˚
46.4mm - 12.8˚
75.1mm - 20.5˚
1” 1:1 aspect ratio sensor *6:5 aspect ratio
†
Specifications subject to change
Figure 2: Relative illumination (center to corner)
In both plots, field points corresponding to the image circle of common sensor formats are included. Plots represent theoretical values from lens design software. Actual lens performance varies due to
manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
Our TECHSPEC® High Resolution Lenses for 1” and 4/3” Sensors are
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-574 • 50mm
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 500mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-574 • 50mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 500mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-574 • 50mm
Figure 3: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 4: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/2.8
WD: 1000mm
TECHSPEC®
HIGH RESOLUTION LENSES
FOR 1” AND 4/3” SENSORS
#86-574 • 50mm
Figure 5: Image space polychromatic diffraction FFT Modulation Transfer Function (MTF) for λ = 486nm to 656nm. Included are Tangential and Sagittal
values for field points on center, at 70% of full field and at the maximum sensor format. Solid black line indicates diffraction limit determined by f/#defined aperture. Frequencies corresponding to the Nyquist resolution limit of pixel sizes are indicated.
Figure 6: Polychromatic diffraction through-focus MTF at 20 linepairs/mm (image space). Contrast is plotted to two times the focus distance. Note object
spatial frequency changes with working distance.
Plots represent theoretical values from lens design software. Actual lens performance varies due to manufacturing tolerances.
www.edmundoptics.com
® COPYRIGHT 2014 EDMUND OPTICS, INC. ALL RIGHTS RESERVED
TECHSPEC® HIGH RESOLUTION LENSES FOR 1” AND 4/3” SENSORS
MTF & DOF: f/4.0
WD: 1000mm