www.alfain.com
ALF 180 industry
ALF 200 industry
EKONOM 180
EKONOM 200
EKONOM 250
ALF 180 industry, ALF 200 industry, EKONOM 180, EKONOM 200, EKONOM 250
MIG/MAG welding machines that are designed for welding of simple and alloyed materials and aluminium alloys.
EKONOM LINE while maintaining the maximum utility value we lay emphasis on the minimum price. Products of this line are suitable
for operations with lower utilization level of welding machines.
ALF LINE is designed for industrial environments which have high requirements with regard to reliability, productivity, and ease of
operation during permanent use. That is the reason for the massive welded casing and the prominent handles which protect the
control panel and highlight the ROBUST NATURE of this product.
EKONOM and ALF 180, 200 are designed for welding of small thicknesses (ALF 200 industry EKONOM 200 can weld small and
medium thicknesses). They are suitable especially for body repair shops and lock smith shops.
EKONOM 250 thanks to its maximum current output it can be used for a wide range of welding activities.
They are designed for a long-term operation in body repair shops and fitting shops.
DESCRIPTION AND FUNCTIONS
Appliances ALF industry and EKOMOM are three face step MIG/MAG welding.
EKONOM 180 and ALF 180 weld wire of diameter 0,6 - 0,8 or flux cored wire up to 1,2 mm. There are 7 voltage steps.
EKONOM 200 and ALF 200 weld wire of diameter 0,6 - 1,0 or flux cored wire up to 1,2 mm. There are 7 voltage steps
EKONOM 250 weld wire of diameter 0,6 - 1,2 or flux cored wire up to 1,4 mm. There are 10 voltage steps.
The SYNERGY control panel is simple in its appearance but it manages more functions than is usual for step machines of this type:
• It measures voltage and current.
• It tells the welder the best settings (positions of switches and choke terminals), (MINOR or BASIC control on request).
ACCESSORIES
• EKONOM and ALF are manufactured as compact welding unit.
• All machines are equipped with EURO torch connector, torches 3 – 5 m can be connected. The SYNERGY and MINOR control
panels enable using ALFA IN torches with Up-Down correction of the wire speed.
Technical data
EKONMOM 180
ALF 180 industry
EKONOM 200
ALF 200 industry
EKONOM 250
3x400V ~ ±15% / 50-60Hz
3x400V ~ ±15% / 50-60Hz
3x400V ~ ±15% / 50-60Hz
3x400V ~ ±15% / 50-60Hz
3x400V ~ ±15% / 50-60Hz
10A DELAYED
10A DELAYED
10A DELAYED
10A DELAYED
16A DELAYED
Power factor coss φ�
0,8
0,8
0,8
0,8
0,9
Weldin current range
30A – 180A
30A – 180A
30A – 200A
30A – 200A
40A – 250A
MIG
MIG
MIG
MIG
MIG
Type machines
Mains
Mains protection T
Welding method
Duty cycle
25%
60%
100%
30%
60%
100%
25%
60%
100%
30%
60%
100%
30%
60%
Welding current
180A
110A
80A
180A
120A
95A
200A
150A
120A
200A
160A
140A
250A
200A
160A
Welding voltage
23
15,5
17,5
23,0V
20,0V
18,9V
24,0V
21,5V
20,0V
24,0V
22,0V
21,0V
26,5V
24,0V
22,5V
Input power
Max. imput current
Open circuit voltage
4,8KVA 3,3KVA 2,1KVA
8,7A
4,8A
3,0A
20,1V – 34,1V
6,0KVA 3,5KVA 2,6KVA
8,7A
5,0A
3,8A
20,1V – 34,1V
6,8KVA 5,0KVA 4,2KVA
9,9A
7,30A
6,1A
17,5V – 31,0V
6,8KVA 5,0KVA 4,2KVA
9,9A
7,30A
6,1A
17,5V – 31,0V
8,6KVA 6,2KVA 4,3KVA
12,4A
8,9A
H
H
H
H
H
Protection class
IP 21
IP 21
IP 21
IP 21
IP 21
Standards
Dimensions (LxWxH)
Weight
6,3A
17,5V – 35,0V
Insulation class
Cooling
100%
AF
AF
AF
AF
AF
EN 60974–1 / EN 50199
EN 60974–1 / EN 50199
EN 60974–1 / EN 50199
EN 60974–1 / EN 50199
EN 60974–1 / EN 50199
470 x 750 x 600mm
470 x 750 x 600mm
470 x 750 x 600mm
470 x 750 x 600mm
510 x 800 x 810mm
55 Kg
59 Kg
62 Kg
62 Kg
81 Kg
ALFA IN a.s.
Nova Ves 74,
675 21 Okrisky, Czech republic
www.alfain.com
[email protected]
tel.: +420 568 840 009
fax: +420 568 840 966
TENTO PROJEKT JE SPOLUFINANCOVÁN EVROPSKÝM
FONDEM PRO REGIONÁLNÍ ROZVOJ A MINISTERSTVEM
PRŮMYSLU A OBCHODU
© ALFA IN a.s. Text and illustrations technically correct at time of gong to print. We reserve the rights to make modifications.
• The transformers use copper winding.
• Machines are equipped with solid all-metallic two-rolls wire feeding units.
AJ.01-9306