Data sheet: Wilo-Stratos 25/1-8 Pump curves 0 Approved fluids (other fluids on request) 1 v 2 0 0,5 1 H/m 3700 1/min - 10 V 1,5 3 4 2 5 2,5 Rp 1 Wilo-Stratos 25/1-8 Wilo-Stratos 30/1-8 7 3040 1/min - 8 V 50 2710 1/min - 7 V 40 2390 1/min - 6 V 3 70 60 6 4 p/kPa 1~230 V - Rp 1 / Rp 1¼ 3370 1/min - 9 V 5 m/s 3,5 Rp 1¼ 3 30 2060 1/min - 5 V 2 1400 1/min - 3 V 1 0 20 1730 1/min - 4 V 0 0 P1/W n= const 150 100 10 2 4 0,5 6 1,0 10 V 9V 1,5 8V 7V 50 0 3V 0 2,0 Q/m³/h Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) Permitted field of application Temperature range at max. ambient temperature +40 °C -10...+110 °C Maximum permissible operating pressure 10 bar 4 6 8 Q/m³/h Wilo-Stratos 25/1-8 Wilo-Stratos 30/1-8 Pmax Pipe connections 2,5 Q/l/s Threaded pipe union Rp 1 Thread G 1½ Overall length H/m • 0 6V 5V 4V 2 8 Heating water (in accordance with VDI 2035) l0 180 mm Motor/electronics p/kPa 70 Energy efficiency index (EEI) ≤ 0.20 6 60 Electromagnetic compatibility EN 61800-3 5 50 Emitted interference EN 61000-6-3 4 40 Interference resistance EN 61000-6-2 3 30 Speed control Frequency converter 2 20 Protection class IP X4D 1 10 Insulation class F Mains connection 1~230 V, 50/60 Hz 7 1~230 V - Rp 1 / Rp 1¼ m ax . 0 min 0 2 0 P1/W Δp-c 150 0,5 . 4 6 1 8 1,5 Q/m³/h 2,5 Q/l/s 2 max. 7m 6m 100 5m 4m 50 3m 2m 0 2 4 6 8 P2 100.00 W Speed n 1400 - 3700 rpm Power consumption P1 9 - 130 W Current consumption I 0.13 - 1.20 A 100 Q/m³/h Motor protection P1/W Δp-v 150 max. 7m 6m 4m 5m Threaded cable connection 2m 3m min. 0 2 4 6 integrated PG 1x7/1x9/1x13.5 Materials 50 0 Nominal motor power 1m min. 0 0 8 Q/m³/h Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X30CR13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.co.uk 50 Hz 3 / 10 / 16 m 2015-02 1/8 Data sheet: Wilo-Stratos 25/1-8 Dimension drawing Information for order placements Rp 1 G 1½ Wilo Type Stratos 25/1-8 Art no. 2090448 Pg 9 Pg 13,5 180 49 90 Pg 7 Make Weight approx. 76 89 43 56 76 114 m 4 kg 182 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM 3~230 V, 50/60 Hz L1 L3 PE SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo-Control, consulting guide" Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 2/8 Dimensions and dimension drawings: Wilo-Stratos 25/1-8 Dimension drawing Rp 1 G 1½ Pg 13,5 76 89 76 114 Subject to change without prior notice. 49 180 Pg 9 90 Pg 7 43 56 182 www.wilo.co.uk 50 Hz 2015-02 3/8 Pump curves: Wilo-Stratos 25/1-8 Pump curves 0 1 v 2 0 0,5 1 H/m 3700 1/min - 10 V 1,5 3 4 2 5 2,5 Rp 1 Wilo-Stratos 25/1-8 Wilo-Stratos 30/1-8 7 3040 1/min - 8 V 50 2710 1/min - 7 V 40 2390 1/min - 6 V 3 70 60 6 4 p/kPa 1~230 V - Rp 1 / Rp 1¼ 3370 1/min - 9 V 5 m/s 3,5 Rp 1¼ 3 30 2060 1/min - 5 V 2 1400 1/min - 3 V 1 0 20 1730 1/min - 4 V 0 0 P1/W n= const 150 100 10 2 4 0,5 6 1,0 10 V 9V 8V 7V 50 0 3V 0 4V 2 8 1,5 2,0 Q/m³/h 0 2,5 Q/l/s 6V 5V 4 6 H/m 8 Q/m³/h Wilo-Stratos 25/1-8 Wilo-Stratos 30/1-8 7 p/kPa 70 1~230 V - Rp 1 / Rp 1¼ 6 60 5 50 4 40 m ax . 3 30 2 20 1 0 10 min . 0 2 0 P1/W Δp-c 150 0,5 4 6 1 8 1,5 Q/m³/h 0 2,5 Q/l/s 2 max. 7m 6m 100 5m 4m 50 3m 2m 1m min. 0 0 2 4 6 8 P1/W Δp-v 150 100 Q/m³/h max. 7m 6m 4m 5m 2m 3m 50 min. 0 0 2 4 6 8 Subject to change without prior notice. Q/m³/h www.wilo.co.uk 50 Hz 2015-02 4/8 Ordering information: Wilo-Stratos 25/1-8 Information for order placements Make Wilo Type Stratos 25/1-8 Art no. 2090448 EAN number 4016322993971 Colour green/black Minimum order quantity 1 Minimum order quantity unit PCE Weight (net) kg 4.1 Length (net) mm 180 Width (net) mm 203 Height (net) mm 238 Weight (gross) kg 4.8 Length (gross) mm 340 Width (gross) mm 320 Height (gross) mm 260 Packaging type Cardboard box Packaging property Transport packaging Pieces per pallet 30 Number per layer 6 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 5/8 Specification texts: Wilo-Stratos 25/1-8 Wilo-Stratos high-efficiency pump electronically controlled, Glandless circulation pump with minimum operating costs, for pipe installation. Can be used for all HVAC applications (-10 °C to +110 °C). With built-in electronic power control for constant/variable differential pressure. Standard-equipped thermal insulation shells. One-button manual operation level as standard, for: • Pump On/Off • Selecting the control mode: • Automatic setback operation (self-learning) • Setpoint or speed adjustment Graphical pump display with rotatable display horizontal and vertical module mounting, for display of: • Operating status • Control mode • Differential pressure or rotation speed setpoint • Fault and alarm signals Synchronous motor using ECM technology with very high efficiency and high starting torque, automatic deblocking function and built-in full motor protection. Fault signal light, potential-free collective fault signal, infrared interface for wireless communication with Wilo IR-Monitor/IR-Stick operating and service device. Plug-in slot for Wilo Stratos IF-modules with interfaces for building automation (BA) or dual pump management (accessories: IF-modules Stratos Modbus, BACnet, LON, CAN, PLR, Ext.Aus, Ext.Min, SBM, Ext.Aus/SBM or DP). Pump housing made of cast iron with cataphoretic coating, impeller made of glass-fibre reinforced plastic, stainless steel shaft with metal impregnated carbon plain bearings. For flange-end pumps - flange versions: • Standard version for pumps DN 32 to DN 65: Combination flange PN 6/10 (flange PN 16 acc. to EN 1092-2) for counter flanges PN 6 and PN 16 • Standard version for pumps DN 80 / DN 100: Flange PN 6 (configured for PN 16 acc. to EN 1092-2) for counter flange PN 6 • Special version for pumps DN 32 to DN 100: Flange PN 16 (acc. to EN 1092-2) for counter flange PN 16 Materials Pump housing: Grey cast iron (EN-GJL-200) Impeller: Plastic (PPE - 30% GF) Pump shaft: Stainless steel (X30CR13) Bearing: Carbon, metal impregnated Approved fluids (other fluids on request) 3 Max. volume flow: 8 m /h Max. delivery head: 8 m Pipe connections Threaded pipe union: Rp 1 Thread: G 1½ Overall length: 180 mm Motor/electronics Energy efficiency index (EEI): ≤ 0.20 Electromagnetic compatibility: EN 61800-3 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 6/8 Specification texts: Wilo-Stratos 25/1-8 Emitted interference: EN 61000-6-3 Interference resistance: EN 61000-6-2 Speed control: Frequency converter Protection class: IP X4D Insulation class: F Mains connection: 1~230 V, 50/60 Hz Mains frequency: 50/60 Hz Nominal motor power: 100 W Speed: 1400 - 3700 rpm Power consumption 1~230 V: 9 - 130 W Current at 1~230V: 0.13 - 1.20 A Motor protection: integrated Threaded cable connection: 1x7/1x9/1x13.5 Information for order placements Art no.: 2090448 EAN number: 4016322993971 Weight approx.: 4 kg Make: Wilo Type: Stratos 25/1-8 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 7/8 Installation positions: Wilo-Stratos 25/1-8 asim:tr(use.title1)} asim:tr(use.title2)} Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 8/8
© Copyright 2026 Paperzz