FINISHES
By Actiu
www.actiu.com
FEATURES
Technical Profile
GROUP “T”
T - POLYESTER® NON METALLIC DYESTUFFS
T88
T91
T80
T89
T81
T90
T87
T85
T84
T86
T83
T82
www.actiu.com
02
TECHNICAL SPECIFICATIONS GROUP “T”
Material
Polyester® Non metallic dyestuffs
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Cleaning
Vacuum regulary. Wipe clean with damp cloth or
shampoo using propietary upholstery shampoo.
Flammability
BS EN 1021 - 1 & 2 (Cigarette & Match) - BS 7176:2007 Low Hazard
BS 476 Part 7 Class 1
BS EN 13501-1 Adhered Class B, s1, d0
BS EN 13501-1 Unadhered Class B, s1, d2
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
100%
440
170
50.000
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
03
FEATURES
Technical Profile
GROUP “L”
L - RECYCLRD POLYESTER® NON METALLIC DYESTUFFS
L88
L91
L84
L89
L81
L82
L86
L85
www.actiu.com
04
TECHNICAL SPECIFICATIONS GROUP “L”
Material
Recycled Polyester® Non metallic dyestuffs
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
Cleaning
Vacuum regulary. Wipe clean with damp cloth or
shampoo using propietary upholstery shampoo.
Flammability
BS EN 1021 - 1 & 2 (Cigarette & Match) - BS 7176:2007 Low Hazard
BS 476 Part 7 Class 1
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
Environment
EU Ecolabel
100%
440
170
50.000
6
4/4
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
05
FEATURES
Technical Profile
GROUP “C”
C - XTREME FLAMERETARDANT® NON METALLIC DYESTUFFS
C88
C81
C84
C89
C83
C82
C87
C86
www.actiu.com
06
TECHNICAL SPECIFICATIONS GROUP “C”
Material
Xtreme FlameRetardant® Polyester Non metallic dyestuffs
Weight
lin. metre aprox. grams
435
Width
cm
140
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Cleaning
Vacuum regulary. Wipe clean with damp cloth or shampoo
using propietary upholstery shampoo.
Flammability
BS EN 1021 - 1&2 (Cigarette & Match) - BS 7176:2007 Low Hazard
BS 7176:2007 Medium Hazard - BS 5852, Crib 5 - DIN 4102 B1
NF-P-92-507 M1 - UNI 8456 & UNI 9174 Class 1
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
100%
100.000
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
07
FEATURES
Technical Profile
STEP GROUP “M”
100% TREVIRA CS / FLAME RETARDANT
M75
M90
M78
M71
M92
M76
M91
M12
M94
www.actiu.com
08
TECHNICAL SPECIFICATIONS STEP GROUP “M”
Material
Trevira CS
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
100.000
Pilling
scale 1-5, max. 5 - EN ISO 12945-2
4-5
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
5-7
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4-5
Shrinkage: <5%
℗
Cleaning
US ACT
100%
470
140
Pass Heavy Duty Upholstery
Flammability
BS EN 1021 1&2 - BS 5852 crib 5 - FAR/JAR 25853 - (a) (i) (ii)
DIN 4102:B1 - NFP 92-503:M1 - BS 7176 Med.Hazard - CA TB 117-2013
IMO Res. A 652 (16) - UNI 9175 class 1 | EMME - Calif. Tech. Bull. 117-E
Önorm B 3825 B1/Q1 - BS 5852 0&1 - MED Certificate IMO
AM 18 - NF D 60 - 013
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
09
FEATURES
Technical Profile
MELANGE GROUP “M”
100% TREVIRA CS / FLAME RETARDANT
M23
M20
M14
M15
M17
M22
M10
M24
M19
www.actiu.com
10
TECHNICAL SPECIFICATIONS MELANGE GROUP “M”
Material
Trevira CS
Weight
lin. metre aprox. grams
470
Width
cm
140
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
100.000
Pilling
scale 1-5, max. 5 - EN ISO 12945-2
4-5
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
5-7
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4-5
Shrinkage: <5%
℗
Cleaning
US ACT
100%
Pass Heavy Duty Upholstery
Flammability
BS EN 1021 1&2 - BS 5852 crib 5 - FAR/JAR 25853 - (a) (i) (ii)
DIN 4102:B1 - NFP 92-503:M1 - BS 7176 Med.Hazard
IMO Res. A 652 (16) - UNI 9175 class 1 | EMME - Calif. Tech. Bull. 117-E
Önorm B 3825 B1/Q1 - BS 5852 0&1 - MED Certificate IMO
AM 18 - NF D 60 - 013
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
11
FEATURES
Technical Profile
BLAZER GROUP “B”
100% VIRGIN WOOL
B15
B20
B13
B21
B17
B16
B11
B10
B14
B28
B29
B12
www.actiu.com
12
TECHNICAL SPECIFICATIONS BLAZER GROUP “B”
Material
Virgin Wool
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
5
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4
Cleaning
Vacuum regularly. Professionally dry clean or wipe clean with
a damp cloth.
100%
645
140
50.000
US ACT
Pass Heavy Duty Upholstery
Flammability
BS EN 1021-1/2 - BS 7176 Low Hazard
OPTIONAL:
BS 5852 when FR treated
BS 7176 Medium Hazard when FR treated
UNI 9174 Class 1IM
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
Environment
EU Ecolabel
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
13
FEATURES
Technical Profile
ATLANTIC GROUP “F”
100% POLYESTER®
F15
F16
F14
F21
F17
F22
F20
F10
F12
www.actiu.com
14
TECHNICAL SPECIFICATIONS ATLANTIC GROUP “F”
100%
Material
Polyester
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
110.000
Pilling
scale 1-5, max. 5 - EN ISO 12945-2
4-5
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
5-7
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4-5
Cleaning
Dry cleaning.
US ACT
Pass Heavy Duty Upholstery
Flammability
CA TB 117-2013 · California Bulletin CAL 117-E-Class 1 · ASTM E 84
ÖNORM B 3825-B1-3800-Q1 UK · AM 18 - NF D 60-013 · Class Uno
UNI 9175 Class 1 I EMME · NF P 92-503 M3 · BS EN 1021 1&2
It can also be compatible with other flammability standards .
The level of fire resistance is dependent on foam used and fire protection
Environment
OEKO-Tex · EU Ecolabel · 100% Free of heavy metals
530
150
Shrinkage: ≤3%
℗
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
15
FEATURES
Technical Profile
STEELCUT TRIO GROUP “S”
90% NEW WOOL
10% NYLON
S13
S25
S19
S17
S23
S16
www.actiu.com
16
TECHNICAL SPECIFICATIONS STEELCUT TRIO GROUP “S”
Material
New wool - Nylon
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
100.000
Pilling
scale 1-5, max. 5 - EN ISO 12945-2
3-4
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
5-7
Cleaning
Vacuuming and dry cleaning
90% - 10%
770
140
US ACT
Pass Heavy Duty Upholstery
Flammability
EN 1021-1/2 · BS 5852, ignition source 2-3 · DIN 4102 B2 · Önorm B1/
Q1 · NF D 60 013 · Italian Class 1IM · US Cal. Tech. Bull. 117, Sec. E
IMO A.652(16)
Retardant treatment : BS 5852 Crib 5
Environment
EU Ecolabel
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
17
FEATURES
Technical Profile
HARLEQUIN GROUP “H”
100% POLYESTER®
H18
H14
H15
H12
www.actiu.com
18
TECHNICAL SPECIFICATIONS HARLEQUIN GROUP “H”
Material
Polyester
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - BS EN ISO 12947-2 (Martindale)
Pilling
BS EN ISO 12945-2
Colour fastness to light
scale 1-8, max. 8 - BS EN ISO 105 - B02
5-6
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4-5
US ACT
Pass Heavy Duty Upholstery
Cleaning
Dry cleaning ℗
100%
480
160
100.000
5
P-Cleaning
Shrinkage: max 4,5%
Shrinkage: max 6,0%
Flammability
BS EN 1021 -1&2 - BS 5852 P1 - 0 - Calif. Tech. Bull. 117,E
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
19
FEATURES
Technical Profile
FABRIC MESH “STRING”
100% POLYESTER®
31
www.actiu.com
30
20
TECHNICAL SPECIFICATIONS FABRIC MESH “STRING”
Material
Polyester
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - BS EN ISO 12947-2 (Martindale)
Pilling
BS EN ISO 12945-2
5
Colour fastness to light
scale 1-8, max. 8 - BS EN ISO 105 - B02
5
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
5
US ACT
Pass Heavy Duty Upholstery
Cleaning
Dry cleaning ℗
100%
405
160
70.000
P-Cleaning
Shrinkage: max 1,0%
Shrinkage: max 1,5%
Flammability
BS EN 1021 -1&2 - BS 5852 - 0&1.
Will also pass other flammability standards. Flame retardant
performance is dependent upon the foam used and fireproof
treatment.
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
21
FEATURES
Technical Profile
OMEGA 3D GROUP “G”
100% POLYESTER®
G13
G17
G20
G21
G19
G16
www.actiu.com
22
TECHNICAL SPECIFICATIONS OMEGA 3D GROUP “G”
Material
Polyester
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - BS EN ISO 12947-2 (Martindale)
Pilling
BS EN ISO 12945-2
Colour fastness to light
scale 1-8, max. 8 - BS EN ISO 105 - B02
5-6
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4-5
US ACT
Pass Heavy Duty Upholstery
Cleaning
Dry cleaning ℗
100%
500
160
100.000
5
P-Cleaning
Shrinkage: max 2,5%
Shrinkage: max 4,5%
Flammability
BS EN 1021 -1&2 - BS 5852 P1 - 0 - Calif. Tech. Bull. 117,E
Will also pass other flammability standards.
Flame retardant performance is dependent upon the foam used and
fireproof treatment.
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
23
FEATURES
Technical Profile
FABRIC MESH “PLUS”
64% POLYESTER®
36% POLYAMIDE
10
09
11
08
www.actiu.com
24
TECHNICAL SPECIFICATIONS FABRIC MESH “PLUS”
Material
High tenacity polyester
64%
Polyamide
36%
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
5-7
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
4-5
Cleaning
Vacuum cleaning, cleaning with dry foam.
Flammability
BS EN 1021 - 1:1994 Part 1
450
160
100.000
Thanks to its fabric technical properties prevent gradual
deformations. Constantly adapts to any user’s positions and also
helps the user’s back to maintain a regular temperature because
of the fabric transpiration. Mesh structure is physically prepared
to resist scratches or damages produced by sharp items recovering
thus its initial state by extending the end product’s life
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
25
FEATURES
Technical Profile
FABRIC MESH “NET”
64% POLYESTER®
36% POLYAMIDE
Black Colour 55%
Black Colour 45%
01
07
06
02
05
03
04
www.actiu.com
26
TECHNICAL SPECIFICATIONS FABRIC MESH “NET”
Material
High tenacity polyester
Black 55% / Colours 64%
Polyamide
Black 45% / Colours 36%
Weight
lin. metre aprox. grams
Width
cm
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Pilling
EN ISO 12945-2
Colour fastness to light
scale 1-8, max. 8 - EN ISO 105 - B02
Colour fastness to rubbing
scale 1-5, max. 5 - EN ISO 105X12 (wet/dry)
Cleaning
Vacuum cleaning, cleaning with dry foam.
Flammability
EN 1021/1
Black 390 / Colours 420
155
100.000
5
6
4-5
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
27
FEATURES
Technical Profile
GROUP “N”
86% COATING: PVC
14% TEXTILE: CO/PES
N35
N38
N37
N34
N33
N32
N31
N36
N39
N30
www.actiu.com
28
TECHNICAL SPECIFICATIONS GROUP “N”
Material
Coating: PVC
86%
Textile: CO/PES
14%
Weight
g/m2 - DIN 53352
Width
cm
140
Thickness
mm
0,95 - 1,15
Abrasion resistance
BS 5690 (Martindale)
Colour fastness to light
scale 1-8, max. 8 - DIN 75202
6-7
Colour fastness to rubbing
scale 1-5, max. 5 (wet/dry) - DIN 54021
4-5
Cleaning
Rub gently with damp cloth or sponge.
Do not use multi-purpose products
Flammability
EN1021 1&2
630
≤100.000
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
29
FEATURES
Technical Profile
GROUP “P”
100% FIRST QUALITY SELECTED LEATHER (COW GRAIN LEATHER)
P18
www.actiu.com
P11
P10
30
TECHNICAL SPECIFICATIONS GROUP “P”
Material
First quality selected leather (Cow grain leather)
Finish
First quality leather semi-aniline (Chrome tanning)
Thickness
mm
Tear resistance
DIN 53329
> 20 N
Bending resistance
DIN 53351
Min. 100.000
Grip Finish
IUF 470
pH of the aqueous excerpt DIN 53312
Colour fastness to light
DIN 50004
Colour fastness to rubbing DIN 53339 (wet/dry)
Cleaning
Wipe clean with neutral deterge.
Flammability
BS 5852
100%
100%
0,8-1,1
min. 1,5N/10mm
> 3,5 N
5
250 ºC - 1000 ºC
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
31
FEATURES
Technical Profile
GROUP “J”
100% FIRST QUALITY SELECTED LEATHER (COW GRAIN LEATHER)
J18
www.actiu.com
J11
J10
32
TECHNICAL SPECIFICATIONS GROUP “J”
Material
First quality selected leather (Cow grain leather)
Finish
First quality leather semi-aniline (Chrome tanning)
Width
m2
4,8-5,0
Thickness
mm
0,9 - 1,1
Tear resistance
ISO 3377-I
Bending resistance
ISO 5402
Colour fastness to light
ISO 105 B02
Adhesion
ISO 11644
100%
100%
≥ 20 N
> 50.000
≥5
≥ 2,5 N/cm
Colour fastness to rubbing Dry 500 ciclos. - ISO 11640
≥4
Wet 80 ciclos. - ISO 11640
≥4
Sweat 50 ciclos. - ISO 11640
Cleaning
Wipe clean with neutral deterge.
Flammability
EN1021 1&2
≥4
250 ºC - 1000 ºC
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
33
FEATURES
Technical Profile
LEATHER FACE
100% RECYCLED LEATHER FIBRES
07
www.actiu.com
02
04
11
10
34
TECHNICAL SPECIFICATIONS LEATHER FIBRES
Material
Recycled Leather Fibres
100%
Finish
Poliurethane Water Solution
100%
Weight lin/metre
grams
Width
cm
140-145
Thickness
mm
1,1 - 1,8
Abrasion resistance
rubs - EN ISO 12947-2 (Martindale)
Colour fastness to rubbing ISO 105X12 (wet/dry)
140
45.000
> 500 cycles (Wet) > 2.000 cycles (Dry)
Tear resistance
ISO-33771
>10n
Finish Adhesion
ISO-11644
>5n
Cleaning
Wipe clean with neutral deterge.
Flammability
BS EN 1021 - 1:2006 (Cigarette) - BS EN 1021 - 2:2006 (match)
Subject to changes and colour diferences
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
35
FEATURES
Technical Profile
BEECH LACQUERED PLYWOOD
18/28 NATURAL LAQUERED BEECH
14 CHESTNUT
00 WHITE
07 RED
26 NATURAL OAK
29 WENGUE LAQUERED OAK
www.actiu.com
19 WENGUE LAQUERED OAK
36
LACQUERED PLYWOOD TECHNICAL SPECIFICATIONS
Plywood desktop of 10 mm thickness manufactured with natural beech or oak wood
and synthetic resins using high pressure and heat. The alternating arrangement of the
fibres formed at right angles (perpendicular and transverse), gives the product great
dimensional stability and durability, great resistance and lightness, 100% recyclable.
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
37
FEATURES
Technical Profile
POLIURETHANE
01 GREY
08 BLACK
06 BLUE
15 PISTACHIO
www.actiu.com
07 RED
38
TECHNICAL SPECIFICATIONS POLIURETHANE
PU (Poliurethane integral) - (TPU)
Versatile material with compact surface and soft inner. It is comfortable and solid,
pleasant and resistance.
Elastomer to absorb impacts or constant movements.
Long lasting without any maintenance.
Great resistance to over weight as well as capacity to absorb impacts.
Polyurethane used by Actiu is resistant to grease, oil, cracks, tears and heat up to
80ºC). All standard pieces fulfill DIN 9835 quality requirements.
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
39
FEATURES
Technical Profile
THERMOPLASTIC
23 LIGHT BLUE
00 WHITE
01 GREY
26 DARK BLUE
07 RED
21 GREY
25 PISTACHIO
24 MUSTARD
22 DARK GREY
10 BLACK
www.actiu.com
40
THERMOPLASTIC TECHNICAL SPECIFICATIONS
POLYPROPYLENE (PP):
Additives with antistatic, antioxidant and UV stabilisers.
A high impact elastomer is used in elements which support a moderate effort (backs, seats and
armrests)
Excellent behaviour under tension and stretching.
Mechanical resistance. High flexibility. Excellent weather resistance.
Reduced crystallisation;
unaffected by environmental stress cracking. Good chemical and water resistance properties. It does
not affect the environment by its absence of chemicals and adhesives.
ABS:
Thermoplastic derivative from a glassy polymer (styrene-acrylonitrile) and an elastic compound,
butadiene.
ABS is a plastic stronger than polystyrene and it stands out for resistance to tension and impact. Good
mechanical, thermal and chemical resistance. Resistance to fatigue.
Strength and robustness. Low temperature ductility. Melting resistance. Brightness. Strength and
robustness. Non-toxic and colourless. It can be extruded, molded by injection, blowing and pressing.
POLYAMIDE (PA) + 40% FIBER GLASS
Additives with antistatic, antioxidant and UV stabilisers. Level 6 (1 to 10).
Composition which supports impacts superior to polypropylene (PP), with a greater robustness and
superficial hardness. It is used in components which require high resistance to impact, especially in
bases and mechanisms.
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
41
FEATURES
Technical Profile
METAL
00/70 WHITE
05 DARK BLUE
07 SILVER POLISHED
01 GRIS
15 PISTACHIO
09 CHROME
02/72 SILVER
14 ORANGE
10/78 BLACK
77 BURGUNDY
www.actiu.com
42
TECHNICAL SPECIFICATIONS METAL
All metal components, aluminum or steel, have epoxy-polyester finish. No toxic or solvent
elements. Chromed finished is done over treated steel.
PAINTING FEATURES
1 – Electrostatic coat, epoxy bonding 2nd generation. Polymerized 200ºC with nano-ceramics and
non-grease treatments to improve better covering and provide then better resistance and lasting.
2 – Coating 80-90 micron thickness (it could be different as per the project requirements).
This covering guarantees the finish and maintenance of metal structures.
3 – Painting process:
Actiu painting plant has minimum environmental impact against the traditional industry
processes.
Treatment is done by polarized coating and compacted with temperature. We get homogeneous
and regular application with 98% of painting and the remaining 2% is used to produce other
paints. Paints used are COVs free (Volatile Organic Components) which are very dangerous for the
environment. All water used in the process is re-used, so we get zero dump.
4 – Antibacterial finish (Optional)
ACTIU reserves the right to make technical modifications
along with changes to measurements and finishes as it
deems fit. It is recommended that you verify any material
before making an order.
www.actiu.com
43
Technical Profile
FEATURES
Wood
Care and protection of wood.
Scratches: Use a protector that protects surfaces against marks, scratches and
Lift objects up whenever possible. The majority of scratches are made by dragging objects across the wood.
Plastic and Rubber: Some plastics contain components that contain soft material.
When you put some wooden objects on this which contain some components which may damage the finish, resulting in shades or prints.
To avoid this, use flet or leather mats on the table. Do not use mats covered in plastic.
Avoid leaving plastic folders or files on the table preventing the wood “breathing”.
Light effects: As with leather, wood changes over time.
Light - affects wood which causes a change in colour.
Each species of wood changes. Some adopt a warm tone while others become darker or lighter.
Move objects and accessories frequently so as to avoid shadows on the wooden surface.
Reflection: Trees contain a “vascular” system of fibres which carry the sap to every corner.
These fibres cause the wood to reflect light in different ways, depending on how it is made up.
For example, a table and extension, having different fibres will look like different shades.
But if you walk around, you will notice how the light changes on work surfaces and the effects of brightness and velvet on the wood.
Avoid temperatures and extreme humidity.
Clean with any Commercial products suitable for cleaning and maintenance for treated wood surfaces, wax basis, aliphatic hydrocarbon or seed oil
surfactant.
Always wipe the surface in the direction of the grain.
Remove stains. Do not use products with silicon.
www.actiu.com
44
Technical Profile
FEATURES
Fabrics
Each material has a specific feature, albeit technical or aesthetic.
If the stain has dried, try to remove the excess by hand or by using a brush.
Place a cleaner on the stain and continue with a PH neutral cleaner with a neutral cleaning agent such as soapy water. It is important to rinse with
clean water.
Types of stains:
Oil: Treat with a solvent or treat with a colour fixing agent.
Alcohol: Fresh stains: Treat with a household vinegar and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent.
Pen: Treat with a colour fixing agent.
Coffee: Fresh stains: Treat with household vinegar, and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent.
Wax for furniture: Treat with a colour fixing agent.
Chewing gum: Treat with a solvent.
Chocolate: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately or treat with solvent.
Cream: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately.
Grease: Treat with a colour fixing agent.
Lip stick: Treat with a colour fixing agent or treat with a colour fixing agent.
Milk: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately.
Butter: Treat with a colour fixing agent. Fresh stains: Treat with soap or liquid soap for hands, rinse immediately.
Urine: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately.
Blood: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately.
Tea: Fresh stains: Treat with household vinegar, and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent.
Ink: Treat with a colour fixing agent.
Wine: Fresh stains: Treat with household vinegar, and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent.
Fruit juice: Treat the stain with a whitening oxidizing agent or treat with a colour fixing agent.
www.actiu.com
45
Technical Profile
FEATURES
Leather
Leather is a natural material, probably the toughest upholstery and requires specific care.
Wipe gently. Use a cream once or twice a year. Do not use shoe polish.
Types of stains.
Water: Soak and leave to dry before brushing.
Pen: Alcohol 90%
Coffee: Mix water with a little ammonia.
Grease: Apply a grease solvent spray. Leave to dry. Brush.
Wax stains: Apply a grease solvent spray. Leave to dry. Brush.
Other stains: Consult with a specialist.
Pen: Warm skimmed milk and lemon juice.
Water based felt-tips: Water and if neccessary a little bit of lemon.
Permanent Ink: Cannot be removed
It is recommended that you clean the upholstery every two weeks, to prevent an accumulation of dirt ( for example skin particles that can be inserted
into the fabric.)
Visitors chairs need less cleaning than work chairs which are used daily.
It is essential to use a soft fibre brush on a vacuum to prevent damage to the fabric surface.
The dried in dirt on the surface will disappear after a thorough cleaning.
As for wet marks and stains that will not disappear after cleaning with a vacuum, we suggest the following solutions:
Mix water with a PH neutral cleaner. The temperature of the water must be between 25 and 35 degrees. A running liquid may also be used but don´t
overdose.
Clean the stains several times, using a soft fabric until they are no longer perceptible. It is essential not to use too much water and avoid soaking the
foam, which could damage the chair.
After 3 washes, rinse with water.
Press with a dry fabric against the other fabric to remove the moisture as much as possible.
If the result is not completely satisfactory, repeat the process.
www.actiu.com
46