eduroam profile tool for Windows 7/8/10 32 and 64bit
Check what version of Windows is running and then open the 32bit or 64bit exe.
Check for operating system info in Windows 7
1. Click the Start button , enter Computer in the search box, right-click Computer,
then click Properties.
2. Look under Windows edition for the version and edition of Windows that your PC
is running.
Check for operating system info in Windows 8.1 or Windows RT 8.1
1. Swipe in from the right edge of the screen, tap Settings, then tap Change PC
settings.
(If you're using a mouse, point to the bottom-right corner of the screen, move the
mouse pointer up, click Settings, then click Change PC settings.)
2. Tap or click PC and devices, then tap or click PC info.
3. Look under Windows for the version and edition of Windows your PC is running.
4. Look under PC for System type to see if you're running a 32-bit or 64-bit version of
Windows.
Check for operating system info in Windows 8, Windows RT & Windows 10
1. On the Start screen, type Computer, press and hold or right-click Computer or
This PC (Windows 10), then tap or click Properties.
2. Look under Windows edition for the version and edition of Windows that your PC
is running.
3. Look under System for System type to see if you're running a 32-bit or 64-bit
version of Windows.
1. Right-click on the appropriate
eduroam file and select “Run as
administrator”
2. The file will set up the necessary settings for connecting to the eduroam network
and display a notification when installed.
Please Note: The downloaded exe file does not install any drivers or software. It has been scripted to create a wireless profile with pre‐defined settings for eduroam. However, by downloading and running the executable, users are reminded that the University does not take responsibility for any issues that may arise and therefore this is run at the device owner’s risk. IT SERVICES
T: +44 (0)20 7915 5488
Fixitcentre.westminster.ac.uk
westminster.ac.uk/it