FORT DOUBLE TWIN LOCK
LOCKING PROCEDURE
Diagram A
D
Diagram B
Diagram C
Diagram D
STEP 1
STEP 1
Make sure the seal flap is held with the
Make sure the seal flap is held with the
rear side facing the user, as shown in
rear side facing the user, as shown in
Diagram A.
Diagram A.
STEP 2
STEP 2
Hold the seal flap using one hand and with
Hold the seal flap using one hand and with
Dithe strip into the “ENTER
the other, insert
the other, insert the strip into the “ENTER
1” hole, as shown in Diagram B. Pull strip
1” hole, as shown in Diagram B. Pull strip
as per required (Preferably pull tight).
as per required (Preferably pull tight).
STEP 3
STEP 3
Insert the strip to “ENTER 2” through the
Insert the strip to “ENTER 2” through the
other side as shown in Diagram C. After
other side as shown in Diagram C. After
inserting, pull the strip tight until the
inserting, pull the strip tight until the
maximum and ensure there is no gap left
maximum and ensure there is no gap left
after sealing.
after sealing.
STEP 4
STEP 4
To tear off or remove the seal, hold the
To tear off or remove the seal, hold the
seal flap using one hand and with the
seal flap using one hand and with the
other, pull at the tear-off section of the seal
other, pull at the tear-off section of the seal
as shown in Diagram D.
as shown in Diagram D.