Stubble cultivator with multipurpose tines
CULTIMER L
www.kuhn.com
be strong, be KUHN
2
CULTIMER L 1000
MULTIPURPOSE
TO THE TIP OF ITS TINES
• You want to carry out surface stubble cultivation,
3-7 cm, and setting up a real stale seedbed.
• You want to carry out stubble cultivation and
incorporate straw to a depth of 7-15 cm, in order to
keep organic matter near the surface.
• You want to carry out deep stubble cultivation
down to 35 cm, and replace plough use.
• You would like to loosen the soil deep down
for good water penetration, and for lower power
consumption, thus fuel consumption.
• You consider quick, easy settings to be of upmost
importance.
• You would like a machine that can adapt to all
of your soil types, with a tine that is stable in the
ground.
• You want to reduce operating costs by using
carbide wear parts.
Opt for a CULTIMER L,
to be able to adapt to different types of
jobs, be sure of getting high quality work
done with a simple, robust, efficient, and
versatile tool, and reduce maintenance
costs by using high quality wear parts.
These 3 advantages combined in one
package, make this machine one of
the most versatile and efficient stubble
cultivators on the market.
KUHN stubble cultivators
with multipurpose tines in
brief:
Number
of tines
Working
width (m)
CULTIMER L 4000
13
4.00
CULTIMER L 5000
16
5.00
CULTIMER L 6000
19
6.00
Models
3
CULTIMER L
1000
WITH HIGH QUALITY
STUBBLE CULTIVATION,
YOU CAN ONLY WIN !
SOIL DEPTH MAINTAINED BY
600 KG TINES
The tine’s working depth is maintained at a constant
level thanks to the new double spring mechanical
Non-Stop safety system. In any soil type, and especially
in stony soil, the 600 to 800 kg tip pressure carries out
homogeneous work.
1
2
2 High quality materials are used to produce this robust
design. Drop-forged flange and beam.
1
4
2
EXCEPTIONAL MIXING
QUALITY
The curved shape and bevelled deflectors carry out a
homogeneous straw and soil mix. The soil is ejected to the
front and taken again by the tine.
3
Efficient work, even in stony ground. The tine is made
of high tensile strength steel so can shift to the side before
shifting vertically.
3
5
CULTIMER L
1000
WELL LEVELLED SOIL
FOR QUALITY STUBBLE CULTIVATION
To achieve quality work, it is
necessary to have well levelled
soil and a good straw spread.
On a flat surface, the roller works
more effectively and its pressure
on the soil is homogeneous
which prevents any windblown
effect.
• levelling discs:
Elastomer safety makes them
highly versatile in any
conditions, including stony
ground.
EVERY SITUATION
HAS ITS ROLLER
Depending on your
soil type, KUHN has
the roller that best
suits your situation.
From the lightest
to the heaviest,
each model has its
specialty:
T-Ring: light roller, aggressive
on clods and straw. Maintains
good coarse soil. Ideal for silty
soils. 600 mm and 130 kg/m
(available season 2015).
6
T-Liner: the new light
multipurpose roller for stony and
wet conditions. It is as aggressive
as the T-Ring. 600 mm and 140
kg/m in treated steel. Impact
and wear resistant.
The CULTIMER L has exceptional driving capacity to work in any type of crop residue, including grain corn.
With 85 cm under-frame clearance and 70 cm beam spacing, residues are incorporated into the soil with no
problem of blockage.
The tines are positioned every 30 cm which is the optimum spacing for residue passage. The machine works
well, even at high speeds.
Packliner: rubber coated roller,
ideal in light soil or to ensure
maximum surface area soil
tamping. 600 mm and
165 kg/m.
HD-Liner 600: the new heavy, high tamping capacity
roller. The V-shape spreads the pressure out
vertically and obliquely, for deep down tamping along
the length of the roller. 600 mm and 180 kg/m
in impact and wear resistant, treated steel.
7
CULTIMER L
1000
SIMPLE SETTINGS
SPECIALLY FOR YOUR COMFORT
1
2
Simple machine depth
adjustment by spacers
on the lift arms 2 .
1
For operating comfort, the machine is easy to handle on headlands and has a parallel
lift system.
Quick, easy levelling disc adjustment by crank handle. 3
Note: Depth control is possible by controlling the front wheels. 4 The drawbar 5 floats
in this case and the machine can contour the ground more precisely.
3
4
5
COMFORT ON THE ROAD
WITH SUSPENSION AND
MECHANICAL LOCK
SAFETY
Compact machine, less than
3.00 in width and highly
stable in transport.
8
OPTIONS THAT MAKE THE DIFFERENCE
• Front wheels for stabilizing or control depth. Quick, easy
adjustment.
• A drawbar extension is available on request to obtain a
steering angle of 110 ° with tractors fitted with twin tyres.
• Cover crop seed drill. To optimize your stubble cultivation passage and seed your cover crops at the same time.
SHs units have a capacity of between 200 and 400 litres for high on the job autonomy (available season 2015).
9
CULTIMER L
1000
MULTIPURPOSE
EFFICIENT TINES
SURFACE STUBBLE CULTIVATION:
DUCK-FOOT SHARE
DEEP STUBBLE CULTIVATION:
80 MM TIPS AND 350 MM FINS
INCREASED LONGEVITY:
CARBIDE TIP AND FINS
This 350 mm share, is designed particularly
for surface stubble cultivation. Even at limited
depths (3 to 7 cm), is scalps the top soil.
Mounted as standard on the CULTIMER,
this tip can be equipped with 2 side fins
for stubble cultivation at a depth of 7-15
cm. Without the fins, this share can work
down to 35 cm.
The lifespan of these parts is 5 times
longer than for conventional parts thanks
to their carbide plates: time and labour
saving. The 50 mm tip is intended for
deep soil restructuring (35 cm) with
limited power requirement.
LOW OPERATING COSTS
LOW MAINTENANCE COSTS
Our carbide wear parts (tips) are forged then treated.
This makes them robust and extremely wear resistant. The
grooves on the upper side fill with soil and reduce wear
even further by the soil-soil contact.
In addition, the carbide plates are positioned in
3 separate areas on the tip ensuring exceptional soil
penetration on hard ground, reduced power requirement
and a long life in terms of wear.
Note: The carbide plates tuck under the tip to prevent
them from detaching in stony conditions.
MAINTENANCE TIME SAVINGS
10
The tines and the levelling disc hubs are maintenance-free to save you time.
Specifications
Multipurpose stubble cultivator with tines
CULTIMER L
4000
CULTIMER L
5000
CULTIMER L
6000
Min. tractor power (kW/hp)
120/160
150/200
180/240
Max. tractor power (kW/hp)
209/280
260/350
313/420
4,00
5,00
6,00
Working width (m)
Transport width (m)
2,82
Beam dimension (mm), 8 mm thick
central beam 260 x 180, extension 120 x 80, tine support 100 x 100
Number of tines
Number of levelling discs
option
13
16
19
10
12
14
Approx. weight (kg)
with HD-Liner 600 mm roller
4300
5400
5900
Approx. weight (kg)
with T-liner roller
4150
5200
5650
Linkage
3 and 4 standard
Transport wheels
520/50-17
Suspension
As standard
Front control wheels
Working depth setting
As an option
340/55-16
5 to 35 cm working depth, 10 km/h average speed
Under beam clearance (cm)
85
Tip width with deflector in mm (without fins)
80
Hydraulic adaptation
Breaks
lift: DA - folding: DA
hydraulic as standard
* KUHN SERVICES:
ADVANTAGES TO GET MAXIMUM USE OUT OF YOUR
MATERIAL AND MAXIMUM PROFITABILITY
*Not all services are available in all countries.
Get your part 24/7
For increasingly rapid repairs!
You need a spare part fast. With KUHN sos order, you benefit
from express delivery 7 days a week, 362 days a year.
Down-time is kept to a minimum and work output improved.
An unexpected technical hitch always happens at the wrong time.
With KUHN I TECH, your Authorized KUHN Partner, your problem will be fixed in no time, and effectively. You’ll get a rapid,
accurate diagnosis with this on-line tool available 24/7.
The professionals’ choice
Rational investment!
36 months peace of mind with KUHN PROTECT+ warranty. You
can concentrate on the job at hand and the performance of your
machine. Because that’s what you expect from investing in a
high-tech machine.
You need a new machine, but are unsure of financing. Modernize
your equipment and improve your farm with KUHN FINANCE –
according to your requirements in total security. We have custommade finance plans to meet your requirements.
11
CULTIMER L 4000 5000 6000
MULTIPURPOSE TO THE TIP OF THEIR
TINES
Farmers have different issues but common objectives: reducing the cost of crop establishment and high work output without compromising yield
potential.
The CULTIMER L was designed in order to offer you a multipurpose machine, quick and easy to adjust, to increase your work output and maintain
the quality of your soil.
OPTIMER+
HVA/DISCOVER
DISCOLANDER
CULTIMER
PERFORMER
Working width (m)
3 to 7,5
2,95 to 7
3,70 to 6
3 to 6
4 to 5
Transport width (m)
3 to 4
2,55 to 3
2,55
2,82 to 3,50
3
24 to 60 discs
24 to 60 discs
32 to 52 discs
10 to 19 tines
14 to 18 tines
3 to 10
5 to 18
5 to 18
5 to 35
10 to 35
mounted and trailed
trailed
trailed
mounted and trailed
trailed
Number of discs or tines
Recommended working depth (cm)
Mounted or trailed version
Discover our KUHN range of disc and tine stubble cultivators
1
2
3
4
5
1. OPTIMER+ 2. DISCOVER 3. DISCOLANDER 4. CULTIMER 5. PERFORMER
Find your closest authorized KUHN dealer on
www.kuhn.com
KUHN S.A.
4 Impasse des Fabriques - BP 50060 - F-67706 Saverne CEDEX-France
KUHN NORTH AMERICA, INC.
1501 West Seventh Avenue – P.O BOX 167 - Brodhead, WI 53520 - USA
KUHN FARM MACHINERY PTY. LTD
313-325 Foleys Road - Deer Park, 3023 Victoria - AUSTRALIA
Find us on YouTube.
Your Authorized Dealer
www.kuhn.com
KUHN FARM MACHINERY (U.K.) LTD
Stafford Park 7 - GB TELFORD/ SHROPS TF3 3BQ
Certain machines are heavy. Keep to tractor’s authorized load, its lift capacity, and max. axle load. The load on
the tractor’s front axle must always be a minimum of 20 % of empty tractor weight. In European Union countries,
our material is conform to the European “Machines” Directive ; in other countries, it is in compliance with current
safety regulations. In our prospectuses, for a clearer illustration of details, some safety systems have been removed.
It is imperative that these safety systems be left in place in all circumstances, in compliance with the instructions
notice. “We reserve the right to modify, without notice, our models, equipment and accessories”. The machines and
equipment on this document may be patented and/or have a registered design. The brands cited in this document
may be protected in one or several countries.
Also find KUHN on
To protect the environment, this leafl et is printed on chlorine-free paper. / Printed in France - 950 046 GB - 10.13 - Copyright 2013 KUHN
STUBBLE CULTIVATOR RANGE