Chlorine
Cl2
PURE GASES
Marking
Essential properties
CAS-Number
7782-50-5
Yellow-greenish, toxic, corrosive gas with characteristic odor,
liquified, heavier than air
Characterization acc. ADR
UN 1017, Chlorine, 2.3 (8)
Class 2, 2 TOC
Symbols of Risks
shoulder:
yellow
Cylinder Marking
toxic
oxidizing
environmental impact
gas, compressed
Physical Properties
molecular weight:
gas density at 0°C and 1,013 bar:
density ratio to air:
vapour pressure at 20°C:
70,906 kg/kmol
3,2149 kg/m3
2,4865
6,776 bar
For additional safety information see Material-/safety data sheet No. *-CL2-022
Valves / Manifolds
Valve connection
acc. to national standards
Recommended Manifolds
Spectrocem FE 121 SP
Specifications / Forms of delivery
2.8
UHP
>
99,8
99,998
Vol.-%
<
<
<
<
<
<
150
600
12
600
-
4
1
2
8
1
1
ppmv
ppmv
ppmv
ppmv
ppmv
ppmv
12,0
65,0
-
45,0
Composition
Cl2
Impurities
O2
N2
H2O
CO2
H2
HC
Cylinders / Content
F 10
F 50
F 47
Remarks
kg
kg
kg
Applications:
Disinfection of swimming pools and drinking water and waste water treatment.
In chemical and pharmaceutical industries chlorine is used as precursor for a lot of chemicals and drugs.
UHP: etching gas in semiconductor industries
For higher demands also barrel supply is possible.
Delivery only with ultimate consumers declaration!
No delivery to private person!
Version: 2.0
Messer Group GmbH
Gahlingspfad 31
47803 Krefeld
[email protected]
www.messergroup.com
Chlorine
Cl2
PURE GASES
Marking
Essential properties
CAS-Number
7782-50-5
Yellow-greenish, toxic, corrosive gas with characteristic odor,
liquified, heavier than air
Characterization acc. ADR
UN 1017, Chlorine, 2.3 (8)
Class 2, 2 TOC
shoulder:
yellow
Cylinder Marking
Symbols of Risks
toxic
oxidizing
environmental impact
gas, compressed
For additional safety information see Material-/safety data sheet No. *-CL2-022
Description
Yellow-greenish, toxic, with humidity strong corrosive, liquified gas with sticking odor. Strongly corrosive to skin, eyes and respiratory
system. Soluble in water. Apparatus made from metal should be passivated. Supports combustion of flammable and incendiary
substances. Reacts strongly with oil and grease. Attacks rubber and most of lubricants, except graphite and silicon.
Acc. to ISO 10298: LC50/1h = 293 ppm.
detection
Potassiumiodide-paper, testing tubes
Safety data
TLV
0,5 ml/m3
Materials
Cylinders and Valves: Steel stainless steel, brass; except aluminium(alloys)
danger of violent reaction with aluminium(-alloys). Under moisty
conditions danger of corrosion resp. Hydrogen embrittling;
requirements see also Hydrogen chloride.
Seals: PTFE, PCTFE, PVDF, FKM
Physical Properties
molecular weight
Critical Point
temperature
Pressure
density
Triple Point
temperature
Pressure
Boiling Point
temperature
liquid density
evaporation heat
Version: 2.0
70,906 kg/kmol
416,956 K
79,914 bar
0,57678 kg/l
172,170 K
0,01387 bar
239,166 K; -34,0 °C
1,5625 kg/l
288,09 kJ/kg
vapour pressure at 20°C
gas density at 0°C and 1,013 bar
density ratio to air
gas density at 15°C and 1 bar
Conversion Factor
liquid at Ts to m3 gas (15°C, 1 bar)
Virial Coefficient
Bn at 0°C
B30 at 30°C
Gaseous State at 25°C and 1 bar
specific heat capacity cp
thermal conductivity
dynam. viscosity
6,776 bar
3,2149 kg/m3
2,4865
3,000 kg/m3
-15,8*10-3 bar-1
-11,8*10-3 bar-1
0,485 kJ/kg K
88,4*10-4 W/m K
13,55*10-6 Ns/m2
Messer Group GmbH
Gahlingspfad 31
47803 Krefeld
[email protected]
www.messergroup.com