Features and Benefits
• Seamless Uniform Illumination
• Highest Luminous Flux at 450Lm / Meter
• Constant Voltage Light Engine
• 160° Optic for Uniform Lighting
• Rated for Wet Environments
• Flexible and Impact Resistant
• Three Year Manufacturer’s Warranty
You have the power to create, shape and illuminate your designs. The power to
illuminate architectural designs in extraordinary ways. With Vivid Wave, you are
more capable than you think. Vivid Wave set a precedent, with an amazing amount
of technology in a remarkably thin, light design. Vivid Wave builds on that achievement
with Constant Voltage technology – eliminating linear fade. Seamless accessories
erase dark spots. Vivid Wave, keeping linear lighting uniform.
For more information
please contact
toll free: 1.888.580.NEON (6366)
email: [email protected]
www.ledneonflex.com
WAVE RGB
WAVE RGB
Technical Specifications
Dimensions
16 x 16mm / .63 x .63in
Output
LED Light
Nichia SMD LED Chip
Running Length
Single feed: 10 meters / 32.8 feet
Double feed: 20 meters / 65.6 feet
Light Surface
Square Profile 160°
Lumen Maintenance
50,000 Hours / 5 years
Electrical
Colors Available
Color
CCT Wave Length
Red
Green
Blue
White
620 - 630 Nanometer
520 - 530 Nanometer
465 - 470 Nanometer
3500K
Lumen Count
Input Voltage
24V DC Constant Voltage
Color
Per Meter
Per Foot
Driver
On Board Constant Current
Red
180 lm/m.
54.8 lm/ft.
Power Consumption
Warm Colors*: 7.2 watts per meter / 2.2 watts per foot
Cool Colors*: 10.5 watts per meter / 3.4 watts per foot
LED Count
108 per meter / 32.9 per foot
Green
Blue
White
360 lm/m.
50 lm/m.
450 lm/m.
109.8 lm/ft.
15.2 lm/ft.
137.2 lm/ft.
Materials
Polyvinyl Chloride (PVC)
LED Spacing
.93 millimeter / .04 inches
Cutting Length
Warm Colors*: 83 millimeters / 3.28 inches - 9 LEDs
Cool Colors*: 56 millimeters / 2.19 inches - 6 LEDs
Package Size: 697 × 807 × 48 millimeters / 27.4 × 31.8 × 1.9 inches
Package Weight:
7.4 kilograms / 16.3 pounds
Thermal Management
Cool to the Touch, Free Air Convection
Fixture Connections
Front & End Leader Cables
Bend Tolerances
Maximum Diameter (medial bending only)
300 millimeters / 11.8 inches
Temperature Ranges
Ambient -30° to 45° Celsius / -22° to 113° Fahrenheit
Operating
-30° to 45° Celsius / -22° to 113° Fahrenheit
Dependability
Warranty
3 years
Safety
Certification
Tested to UL & CSA by Underwriters Laboratory for use in USA and
Canada, complies with California Title 24 Requirements, Lighting Facts.
Exceeds ANSI C78.377A, CE & RoHS Compliant.
IP Rated
IP68 Factory Order/ IP68 with Accessories
*Warm Colors: Red and Amber. Cool Colors: Whites, Green and Blue.
**Photometric Data available upon request or at www.ledneonflex.com
www.ledneonflex.com
Profile
17 mm
.66 inch
Physical
16 mm
.35 inch
Mounting
WAVE RGB
3
Year
D:30cm
3 Year
Minimum Bend Diameter
Photometric Data
LED Type
SMD
Beam angle
160°
Color
Wavelength
Lumen/m
Power/m
Red
620-630nm
>176lm
4.2w
Green
520-530nm
>16lm
3.3w
Blue
465-475nm
>120lm
3w
White
/
>40lm
10.5w
Candle Power Distribution
www.ledneonflex.com
Illuminance Characteristics
WAVE RGB
Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping.
Injection-moulded
Bottom Exit Cable
Connects light to power supply with
pre-installed bottom cable, IP67.
The following cable lengths are available.
(For longer lengths please contact us)
Length
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
LN-16X16-IP67-RGB-FA-B
LN-16X16-IP67-RGB-FA-B-1m
LN-16X16-IP67-RGB-FA-B-2m
Injection-moulded
Side Exit Cable
Connects light to power supply with
pre-installed side cable, IP67.
The following cable lengths are available.
(For longer lengths please contact us)
Length
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
LN-16X16-IP67-RGB-FA-S
LN-16X16-IP67-RGB-FA-S-1m
LN-16X16-IP67-RGB-FA-S-2m
Injection-moulded
End Exit Cable
Connects light to power supply with
pre-installed end cable, IP67.
The following cable lengths are available.
(For longer lengths please contact us)
Length
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
LN-16X16-IP67-RGB-FA-E
LN-16X16-IP67-RGB-FA-E-1m
LN-16X16-IP67-RGB-FA-E-2m
Injection-moulded End Cap
Pre-installed termination protection
of the light, IP67.
Part Number
LN-16x16-IP67-END
Optional Accessory
Male and Female Connectors
Cutter
Part Number - LN-16X16-RGB-FA-ISC
Please Note: Factory order only.
*Installation guide available upon request or at www.ledneonflex.com
www.ledneonflex.com
Mounting Channel
Aluminum Mounting Channel
.70 inch
WAVE RGB
.74 inch
Part Number
50 mm /1.96 inch
1000 mm / 39.37 inch*
LN-16X16-AL-CLIP
25 mm / .98 inch
/
Φ3.5 mm / .13 inch
1
Vivid Wave
LN-16X16-AL-1M-CHAN
100 mm / 3.93 inch
200 mm / 7.87 inch
Φ3.5 mm / .13 inch
5
Vivid Wave
.70 inch
Self-locking Aluminum Profile
.74 inch
Part Number
L1
L2
L3
25 mm / .98 inch
/
25 mm / .98 inch
/
Φ3.5 mm / .13 inch
1
200 mm / 7.87 inch
150 mm / 5.9 inch
350 mm / 13.77 inch
Φ3.5 mm / .13 inch
5
50 mm /1.96 inch
LN-16X16-AL-CLIP-SL
1000 mm / 39.37 inch
LN-16X16-AL-1M-CHAN-SL 100 mm / 3.93 inch
L3
Part Number Naming Convention
LN-16X16-IP68-RGB-3M-L
L - Connector Side
3M- Lead Wire Length
RGB - Fixture Color
IP68 - Protection Rating
16x16 - Profile Size
LN - LED Neon Flex
www.ledneonflex.com
Testing Results for LED Neon Flex
Performance
Standard/Reference value/Description
Optical Testing
Photometric test-integrating sphere system
IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length)
Photometric test-goniophotometer system
IES LM 79(lumen intensity distribution & Lux diagram)
Illuminance efficiency ratio
Product specification sheet
Uniformity of lighting surface (led neon flex light)
Evaluate indirect glare
RGB color mixture uniformity (led neon flex light)
Evaluate the uniformity of color
Lumen maintenance test
IES LM 80
Color-coordinate shift
ANSI C78.377
Electrical Testing
Normal Temperature Test (77°F)
UL1598, IEC60598-1
Normal Temperature Test(104°F)
UL1598, IEC60598-1
Reliability Testing
Lifetime test
IS TM 21
Electrical insulation test
UI2388, IEC60598-1, >4M Ω
Dielectric voltage withstand test
UI2388, IEC60598-1, >1.5KV
Waterproof test
IP68/IP67/IP65
Hi-Lo Temperature impact
-68°F – 140°F
Ultraviolet (UV) light exposure
ASTM G 26. Exposure Method 1
Salt spray test
IEC68-2-11
Anti-cracking test (-13°F)
Assess PVC’s anti-cracking property under low temp.
Connector pull test
50N
Mechanics Testing
Pull test (Connector, Body)
UI2388
Impact test
IEC 62262, UL2388
Bending fatigue resistance test
UL2388, IEC60598-1
www.ledneonflex.com
WAVE RGB
Charts
WAVE RGB
Power Supply Configuration Table
The maximum length of light for different power supply ratings.
Product Standard
18W/83%
Length (m)
35W/85%
40W/88%
60W/89%
75W/89%
80W/90.5%
100W/93%
120W/93%
150W/93%
185W/93.5%
240W/93%
1
1
2
2
4
5
6
8
9
12
15
19
2
*
1
1
2
3
3
4
5
6
8
10
3
*
*
1
1
2
2
3
3
4
5
7
4
*
*
*
1
1
1
2
2
3
4
5
5
*
*
*
1
1
1
1
2
2
3
4
7
*
*
*
*
*
1
1
1
2
2
3
10
*
*
*
*
*
*
*
1
1
1
2
15
*
*
*
*
*
*
*
*
*
1
1
Note- 1. “*”Indicates the power supply is over loaded. 10M/32.8Ft must have power cable installed on both ends of the strip.
2. Example: 18W/83% - 18W is the rated power and 83% is the power efficiency.
6.2 Wavelength of Color Light
www.ledneonflex.com
Charts
www.ledneonflex.com
WAVE RGB
WAVE RGB
Project Details
Project Name:
Notes:
Warehouse Locations
United States
Canada
6230 W. Desert Inn Rd.
Las Vegas, NV 89146
T: (702) 749-5316
30 Milner Road
Moncton, NB E1E 2R8
T: (702) 749-5319
For more information
please contact
toll free: 1.888.580.NEON (6366)
email: [email protected]
www.glls.com
www.ledneonflex.com