Gasoline Engine Series
Outstanding balance characteristics
VESSSEL's gasoline engine tools are provided with features
to achieve an optimum balance, such as an ergonomically
designed body with impact-absorbing grip and a perfectly
adjusted hammering mechanism to reduce the backlash to
the user's wrists.
206
Impact Wrench
208-209
Hammer Drill
208-209
207
Gasoline Engine Impact Wrench
Gasoline Engine Impact Wrench（EDP No. 338510）
No.GT-3500GE
Two Stroke, Forced,
Air Cooled, Single Cylinder
Type
46.5cc, φ43 × 32mm
（Inner bore size × stroke）
Fuel Tank Capacity
1 liter
Fuel Mixture Ratio
25:1（gasoline:2 cycle oil）
Revolution（idling ）
2700 rpm ±250
Revolution（loaded, impact）
7120 rpm
Revolution（non loaded, max） 9880 rpm
Type
Electronic
Spark Plug Type
NGK BPMR6A
Type
Diaphragm
Square Driver Size
25.4mm（1"）
1700 N.m（Full Throttle:1255 ft.lbf）
Fastening Torque Range
950 N.m（Half Throttle:701 ft.lbf）
Free Speed
1200 rpm
Bolt Diameter
32mm（1 1/4"）
W×L×H
330 × 700 × 390mm
Without fuel
19.50kg（42.99 lbs）
Displacement
Engine
Ignition
Carburetor
Impact
Capacity
Size
Weight
Impact Wrench in "Yellow Guppy" Carry Case（EDP No.338516）
No.GT-3500GD
Size
Weight
W450mm × L920mm × H430mm
25.50kg
※Carry Case alone can be purchased as "3500GD（EDP No.350033）
."
"Yellow Guppy" Carry Case（EDP No. 350033）
Size
Weight
Model
W450mm × L920mm × H430mm
6kg（13.23 lbs）
（Case only）
GT-3500GE, GT-3500GED
GT-3500GE
Gasoline Engine Impact Wrench with Damper Unit（EDP No. 338509）
No.GT-3500GED
Size
Weight
W390mm × L680mm × H346mm
21.3kg（46.96 lbs）
※For more details, refer to the specification table of basic GT-3500
unit above.
Throttle lever
D-handle
Support handle
Vibration （m/s2）
20
17.17
18.99
19.18
15
13.88
13.81
10
6.43
5
0
208
D-handle
Support handle
Throttle lever
GT-3500GE
GT-3500GED
Gasoline Engine Hammer Drill
Gasoline Engine Hammer Drill（EDP No.338521）
No.GT-5000HD
Two Stroke, Forced,
Air Cooled, Single Cylinder
Type
Displacement
Engine
Ignition
Carburetor
Capacity
Size
Weight
Fuel Tank Capacity
Fuel Mixture Ratio
Revolution （idling）
Revolution （loaded）
Maximum Output
Maximum Torque
Compression Rate
Fuel Consumption Rate
Type
Spark Plug Type
Type
Hammer Drill
W×L×H
Without fuel
46.5cc, φ43 ×32mm
（Inner bore size × stroke）
1 liter
25:1（gasoline : 2 cycle oil）
2700 rpm ±250
9880 rpm
2.3Ps/7500 rpm
0.34kg-m/5500
7.1:1
380g/Ps.h
Electronic
NGK BPMR6A
Diaphragm
50mm（2"）
, Shank: "SDSmax"
355 × 577 × 470mm
17.90kg（39.5lbs）without drill
Accessories
Hex Key Wrench
Spark Plug Wrench
Spanner
Side Handle
Stopper
Grease
4mm 1pc.
5mm 1pc.
6mm 1pc.
1pc.
10 - 13mm 1pc.
1pc.
1pc.
1pc.
※Remarks: Hammer Drill Bit is not included.
Applications
209