Go to EHS homepage and click on OnSite Chemical tracking.
Use your UMKC username and password to access program.
Click on the Satellite Accumulation icon. This is for the satellite accumulation chemical waste label.
Click Add
Fill out required fields and click save.
Highlight field and click on the Add New Item
This is the screen you get. Fill out the form using the drop down boxes. For the chemical
description, click on the box underneath and type the chemical name in it. This will automatically go to
100%, if there are multiple chemicals, simply click underneath the chemical you just typed and put the
other chemicals that are in the container, adjusting the percentages for the chemical. Click the save
button. Click the add item button to add chemicals to the container at a later time.
Here is the screen you get with the entry you just made highlighted. Click on the In Lab
Container Reports drop down box and you will have three choices for your chemical waste label, small,
medium, and large. Pick which one you want depending on the size of your accumulation container and
click on it. The small would be for around a one liter container, a medium for a 4 liter container, and a
large for a 20 liter container.
I picked the medium label and this is what it looks like. Print the chemical waste label and you
can handwrite the constituents on the label as you add them and update them to the accumulation
container via the program as mentioned above by highlighting the Container #, which this one is
111141, and clicking on the add item button. Attach the label to your waste container. This is how we
track the waste container and it is very important to attach this to your accumulation container.
When your accumulation container is full, you can request that it be picked up from your label contents.
Highlight the container number, in this case it is 111139. Scroll over to the seal button and click on it.
This is the screen you get. Click on seal.
Then click on the request pickup button.
It will ask you to create a waste profile if you have not done so before. Just fill out the required fields
and this will be a one-time task. If you have created a waste profile before, this is what your screen will
look like with the appropriate information. Click on the Yes button
After you click on the Yes button, this is the screen you will get which tells you that is was successfully
entered and that an email was sent to EHS informing us that there is a waste container from your lab
ready to be picked up. The email is automatically sent to us.