Cafeteria Tray Racks
Custom Sizes
Available
Cafeteria Tray Racks
421A
ALUMINUM OR STAINLESS
CONSTRUCTION
Item No._ ____________________
Quantity______________________
Job Name_____________________
Spec No._ ____________________
Cafeteria Tray Racks
ALUMINUM
Model
Spacing/ Capacity
437A 3"/ 40 14X18 438A 4"/ 30 14X18 439A 5"/ 24 14X18 440A 6"/ 20 14X18 445A 3"/ 40 15X20 446A 4"/ 30 15X20 447A 5"/ 24 15X20 448A 6"/ 20 15X20 H
70" 70" 70" 70" 70" 70" 70" 70" W
21" 21" 21" 21" 23" 23" 23" 23" D Weight
30" 44
30" 37
30" 33
30" 30
30" 44
30" 37
30" 33
30" 30
STAINLESS
Model
Spacing/ Capacity
437S 3"/ 40 14X18 438S 4"/ 30 14X18 439S 5"/ 24 14X18 440S 6"/ 20 14X18 445S 3"/ 40 15X20 446S 4"/ 30 15X20 447S 5"/ 24 15X20 448S 6"/ 20 15X20 H
70" 70" 70" 70" 70" 70" 70" 70" W
21" 21" 21" 21" 23" 23" 23" 23" D Weight
30" 75
30" 64
30" 58
30" 54
30" 75
30" 65
30" 59
30" 55
440A
Construction: A Series: Heavy duty, high tensile extruded aluminum. Type 6063-T5
alloy. Lifetime guarantee against rust and corrosion.
S Series: 18 Guage, 304 Series stainless steel.
Tray Slides: Slides are 1" x 1-1/2" extruded aluminum or S.S. angle heli-arc
welded to frame. Bottom load ledge design.
Frame and Cross Supports: Single section vertical and horizontal frame
sections are 1" extruded aluminum or stainless steel tubing. Double section
frames are 1-1/4" extruded aluminum or stainless steel tubing.
Casters: 5" diameter, full swivel design. Non-marking polyurethane wheel.
Double Section
Plate and stem casters are securely bolted to frame to facilitate replacements.
Model
420A* 421A* 422A* 423A* 424A* Spacing/ Capacity
2"/ 60 18X26 3"/ 40 18X26 4"/ 30 18X26 5"/ 24 18X26 6"/ 20 18X26 H
70" 70" 70" 70" 70" W
41" 41" 41" 41" 41" D Weight
26" 75
26" 65
26" 51
26" 43
26" 37
457A 458A 459A 460A 3"/ 80 14X18 4"/ 60 14X18 5"/ 48 14X18 6"/ 40 14X18 70" 70" 70" 70" 41" 41" 41" 41" 30" 30" 30" 30" 72
59
51
45
465A 466A 467A 468A 3"/ 80 15X20 4"/ 60 15X20 5"/ 48 15X20 6"/ 40 15X20 70" 70" 70" 70" 45" 45" 45" 45" 30" 30" 30" 30" 72
59
51
45
*Models 420A- 424A manufactured to hold one
18" X 26" sheet pan per level.
Options/Upgrades:
Caster Brakes (011)
Pan Stop (009)
Pan Stop - Web-Strap (015)
Solid Bottom Aluminum (BA) Sway Bracing (008)
5" X 2" Caster Upgrade (/052) HD Caster Brakes (/052)
55 Channel Drive • Port Washington, NY11050-2216
8891 NW 102nd Street • Medley, FL 33178
Tel: 516-944-6271 • Fax: 516-944-0625
Toll Free: 866-712-7283
www.channelmfg.com • Email: [email protected]