N /-F -FM P/ -KF TX Diffusion Type Gas Detectors Exhaust & environment monitoring TX-1100FK TX-FN TX-FM TX-KFP Effective detectors for exhaust and environment monitoring The TX-KFP is the ideal detector for exhaust monitoring applications. Many of these detectors are used in the semiconductor industry for exhaust monitoring of gas cabinets, valve manifold boxes and production tools. But also in other industries this detector is used in a variety of safety applications. In dirty or humid environments the TX-FM/FN gas detector provides a durable solution for both indoor and outdoor applications. TX-FM has been equipped with a large analog display and if no display is needed the TX-FN model can be selected. Bionics Instrument • Low cost detector range. • Available for a wide range of toxic, corrosive and flammable gases. • 4-20 mA output signals. • Easy to maintain. • Sensor assembly allows both on- and off-site calibration. • Compact design. • 24 Vdc operation. Toxic Gas code Gas to Detect Monitoring range (ppm) housing TG100 Low Cl2 Chlorine 0 - 0.3 400 Sensor type HCl Hydrogen Chloride Standard High 0-3 0 - 10 TX-FM/-FN GS-160DP GS-160DY GS-161DP GS-161DY 0 - 50 GS-162DP GS-162DY 0 - 200 GS-470DP GS-470DY 0-5 GS-471DP GS-471DY 0 - 15 GS-480DP GS-480DY 0 - 15 GS-580DP GS-580DY 0-1 0 - 15 0-2 TX-KFP 500 SO2 700 HF Hydrogen Fluoride 0-9 0 - 50 GS-780DP GS-780DY 800 O3 Ozone 0 - 0.3 0-3 GS-880DP GS-880DY 900 Br2 Bromine 0-3 0 - 10 GS-960DP GS-960DY Sulfur Dioxide 0-5 0 - 0.3 1100 O2 Oxygen 1200 CO Carbon Monoxide 1400 F2 Fluorine — 0 - 25% 0 - 50 0-1 1400 ClF3 Chlorine Trifluoride 1500 H2 Hydrogen 0 - 2000 1700 GS-961DP 0-1 NO Nitroc Oxide 0 - 100 0 - 1000 0 - 10 0 - 30 GS-961DY housing TX-1100FK GS-1250ELP GS-1250ELY GS-1460DP GS-1460DY 0-3 GS-1461DP GS-1461DY 0 - 0.3 GS-1463DP GS-1463DY 0 - 4% GS-1550DP GS-1550DY 0 - 4000 GS-1551DP GS-1551DY GS-1790ELP GS-1790ELY GS-1750DY 0 - 100 0 - 1000 1700 NO2 Nitrogen Dioxide 0-9 GS-1750DP 1700 HNO3 Nitric Acid Vapour 0-6 GS-1783DP GS-1783DY 2100 C2H5OH Ethyl Alcohol 0 - 1000 GS-2150ELP GS-2150ELY 2100 IPA Iso Propyl Alcohol GS-2150ELP GS-2150ELY 2400 NH3 Ammonia GS-2460DP GS-2460DY 2400 CH3 NH2 Methylamine 0 - 30 GS-2460DP GS-2460DY 2400 C2H5NH2 Ethylamine 0 - 30 GS-2460DP GS-2460DY 2400 (CH3)2 NH Dimethylamine 0 - 30 GS-2460DP GS-2460DY 2400 (CH3)2 N Trimethylamine 0 - 75 GS-2460DP GS-2460DY 2400 (C2H5)3N Triethylamine 0 - 75 GS-2460DP GS-2460DY 2500 N 2H 4 0-2 GS-2560DP GS-2560DY 2500 TDMAT 2500 C2H4 (NH2)2 3100 General Acid 3200 H2Se 3400 Chlorides 3400 HBr 1) 0-2 0 - 1000 0 - 25 Hydrazine 0-1 2) 0 - 75 0 - 1000 0-1 GS-2560DP GS-2560DY Ethylene Diamine 0-1 GS-2560DP GS-2560DY GS-3180DP GS-3180DY Hydrogen Selenide 0 - 0.2 GS-3260DP GS-3260DY 0 - 15 GS-3470DP GS-3470DY 3) Hydrogen Bromide 4) GS-3480DP GS-3480DY 0-9 GS-3471DP GS-3471DY 0-9 GS-3780DP GS-3780DY 0 - 30 GS-3980DP GS-3980DY 0 - 0.5 GS-4060DP GS-4060DY 3700 Fluorides 3900 H2O2 Hydrogen Peroxide 4000 PH3 Phosphine AsH3 Arsine SiH4 Silane B2H6 Diborane Al(CH3)2H DMAH 5000 GeH4 Germane 0 - 0.6 GS-5050ELP GS-5050ELY 5000 (CH3)3SiH Trimethyl Silane 0 - 15 GS-5050ELP GS-5050ELY 5000 (CH3O)3SiH Trimetoxy Silane 0 - 15 GS-5050ELP GS-5050ELY 5) 5) 0 - 0.2 5) 0 - 15 5) 5) 0 - 0.3 0 - 20 1) Hydrazine:N2H4 -MMH: Monomethyl Hydrazine PHH: Phenyl Hydrazine UDMH: Unsymmetrical Dimethyl Hydrazine 2) TDMAT: Ti[N(CH3)2]4 3) Chlorides: SiCl4, SiH2Cl2, POCl3, SnCl4, SnCl4, SbCl5, BCl3 ..... 4) Fluorides: SiF4, BF3, WF6, AsF3, PF5, AsF5, MoF6 ..... 5) Hydrides: PH3, AsH3, SiH4, B2H6, DMAH: Dimethyl Aluminium Hydride TX-FM/FN An IP65 rated housing protects these detectors which are suitable for application in dirty and humid environments. Integrated gas sensors of Bionics Instrument are very stable and perform well at high humidity levels. Thanks to the large analog display it is always easy to read the gas concentration. The 4-20 mA output signal can be processed by many different alarm systems. Bionics Instrument supplies the 8CWA and 16CWA alarm units which, with their IP65 rating, perfectly match the application area of most of the detectors. TX-KFP The TX-KFP detector is equipped with a standard KF-40 flange. In combination with the O-ring and clamp it will provide a 100% gas tight fixation of the body onto a pipe or duct. By applying the WM-40B holder or SH-40 clamp the unit can be used for the monitoring of rooms and gas storage areas. Like the TX-FM/FN units the TX-KFP provides a 4-20 mA output signal and can be connected to a large variety of alarm systems. For information about the available alarm systems please consult the separate brochure of Bionics Instrument. Accessories for TX-KFP Clamp for wall mounting SH-40 Installation materials for duct mounting IS-40-PP Protective housing for wall and ceiling mounting WM-40B Sensor protector PR-40 Specifications Detector model TX-KFP Detector model TX-FM/ FMD /FN Sensor type GS-[ ]DP/ ELP/ EKP. Sensor type GS-[ ]DY/ELY. Detection principle Electrochemical. Detection principle Electrochemical. Monitoring configuration Continuous, single point, diffusion. Monitoring configuration Continuous, single point, diffusion. Detectable gases Please refer to the Toxic Gas (TG) table. Detectable gases Please refer to the Toxic Gas (TG) table. Accuracy +/- 5% . Accuracy +/- 5% 1). Output signal 4-20 mA, 2 wire screened. Output signal 4-20 mA, 2 wire screened. Indicator Optional (digital / analog). Indicator Analog (FM)/ Digital (FMD)/ None (FN). Operating temp. 0 °C - 40 °C. Operating temp. -10 °C - 55 °C. Operating humidity 5 % - 95% (non condensing). Operating humidity 5 % - 95% (non condensing). Installation Indoor. Mounting: extract, wall or ceiling. Installation Outdoor/ indoor, wall mounting. Power requirements 24 Vdc. Flange connection KF-40. Power consumption Max. 1.2 Watt. Power requirements 24 Vdc. Dimensions (WxHxD) Approx. 148 x 170 x 75 mm. Power consumption Max. 0.7 Watt. Weight Approx. 0.8 KG Dimensions Approx. Ø 69 x 131 mm. Classification housing IP65. Weight Approx. 0.5 KG. 1) Final accuracy is related to the calibration mixture. 1) 1) Final accuracy is related to the calibration mixture. 148 69 dia W Duct Mounting POWER ppm TEST 2*Ø6 ZERO ADJ. 131 37.5 70 75 C 55 dia 95 61 ~90 ~95 35 dia 35 dia 40 55 25 All rights reserved, © 2008 Bionics Instrument, Eur87-DIF-v8 125 75 Bionics Instrument Co.,Ltd. 6-1254-2 Shimizu, Higashiyamato, Tokyo, 207 Japan Tel. : +81-425-61-4856 Fax. : +81-425-65-3950 E-mail : [email protected] Bionics Instrument Europe B.V. Maxwellstraat 7, 1704 SG Heerhugowaard, The Netherlands Tel. : +31-72-5765630 Fax. : +31-72-5721818 E-mail : [email protected] PureAire monitoring systems, inc. 557 Capital Drive, Lake Zurich, Illinois 60047, USA Tel. : +1-847-726-6000 Fax: : +1-847-726-6051 Tol Free : +1-888-788-8050 E-mail : [email protected] 4 www.bionics.net
© Copyright 2024 Paperzz