n moving vehicles since you can
Fast
Change
Frames
serts, and the insert won't "rattle
Alpina Manufacturing LLC
ccommodates inserts up to .270
2007flyer_FRONTrev.pdf
12/22/08
2:42:25 PM
The Original OEM Leader and Manufacturer!
Manufacturing since 1992
Proud to be one of the few remaining picture frame manufacturing companies
in this industry; manufacturing in Chicago, Illinois USA
American Owned
Round Corners
American Made
A quick guide and outline of our frame products.
We provide the best quality available at low cost.
Displaying Graphics Beautifully!
3418 North Knox Avenue • Chicago, Illinois, 60641
TEL 1-800-915-2828 • FAX 1-800-217-9431
[email protected]
fastchangeframes.com • bannergrip.com
ROUND
CORNERS
ANY SIZE
Table of Contents
Frame Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Frame 1 FF-ST Flip-Up™ 1.25” wide profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Frame 1 FF-ST Flip-Up™ 2.50” wide profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Frame 2 FF-RP Security Flip-Up™ 1.25” wide profile . . . . . . . . . . . . . . . . . . . . . . . 7
Frame 2 FF-RP Security Flip-Up™ 1.75” wide profile . . . . . . . . . . . . . . . . . . . . . . . 8
Frame 3 SL-ST edge load Slide-In™ 1.0” wide profile . . . . . . . . . . . . . . . . . . . . . . . 9
Frame 4 Mini Flip-Up™ .60” “skinny” profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Frame 5 RCOR1.0™ Flip-Up™ Round Corner 1.0” wide profile . . . . . . . . . . . . . . 11
Frame 6 RCOR1.25™ Flip-Up™ Round Corner 1.25” wide profile . . . . . . . . . . . . 12
Frame 7 Armored Steel Sign Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Banner Grip™ 4.0” wide banner stretching frame . . . . . . . . . . . . . . . . . . . . . . . . 14
Stands, A-Frames and uprights any size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Security /Anti-tamper Options for frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Overlay lenses, frame backers and other options . . . . . . . . . . . . . . . . . . . . . . . . . 18
Customer-supplied pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Alpina contact info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Version: 5-07-2014
-2-
LEN
LEN
frame
viewable
Frame Basics
All frames can be used for both interior and exterior use. They are made for mounting on flat surfaces for
easy installation of your signs, graphics and banners. No removal of frames required for fast and easy graphic
of graphic materials going into the frame.
We have
no minimums,
youmaximum.
can order
sing a thin changes.
poster, or a thicker
mounted
graphic up to .250”
Wejust
then 1
cutframe -any size, for any thickness graphic. Large frames
ess so that
thesent
frameun-assembled
sides close down for
on your
as nicely
as possible,
to
are
lowgraphic
cost and
no transit
damage,
and super large frames join seamlessly with our
exclusive “joiner strap” to connect longer pieces.
:
Easy, fast assembly on site.
be used
plaster,
frame is
minimum
for your
Mounting Holes
FlipUpTM Frame
drill bit;
anchors
unts and
All frames have predrilled holes about 2” from
corners for easy wall mounting. Mounting
hardware included and other mounting options
are available upon request such as slatwall,
D ring ceiling hanging, etc.
Mounting Holes
Measuring Methods / Graphic Thickness / Wall Mounting
Slide-InTM Frame
Manufactured by:
COPYRIGHT 2006 PATENTS AND
TRADEMARKS STRICTLY ENFORCED
Alpina Manufacturing LLC
You can order your frames by one of the 3 methods below.
Tel:
1-800-915-2828
Our frames look like permanent mitered You
frames,
withbytheir
opening/loading
features
concealed.
Nonetheless,
can order
whatever
dimension or measuring
method
is most important
to your
Fax: 1-800-217-9431
project.
wee-mail:
do offer
security options for most all our frames to protect from the graphic being removed or stolen.
[email protected]
Most popular is by “Graphic Size” –that is, the frame is made to hold your particular
See
page 17 for Security Options.
www.fastchangeframes.com
size graphic. OD Size and Live Area are typically used if you’re printing your own
graphics. If you order this way, you must print/trim your graphic so that it matches the
insert
thicknesses -“IT”. Knowing the approximate thickness of graphic
Graphic Size shown for the OD Size or Live Area you’ve chosen.
The frames can be made to hold various
material
going intomethods
the frame tells us what bottom pieces to use and how to cut the frames to avoid any gaps
Measuring
The on-line quoting system will show ALL 3 measurements, regardless of how you
at for
the mitered
edges. Graphic Thickness selections:
(totalSo,thickness
everything
going into
frame):tothin
order the frames.
make sureofthe
other measurements
arethe
acceptable
you
frames:
before you
place- order,
contact us. and .251” - .500” thickness.
graphics, (under .100”), .100” - .125” thickness,
.126”
.250”orthickness,
WIDTH
WIDTH
GRAPHIC
SIZE*
OD
SIZE*
LIVE
AREA*
*Actual size of
graphic. Frame
edges cover
perimeter of
graphic.
*Outer
dimensions of
frame
*Portion of
graphic that is
viewable
LENGTH
WIDTH
LENGTH
holes for
Drawing #9
LENGTH
FlipUpTM
lide-InTM
Mounting Holes
The frames are cut to order to meet your exact
specifications.
Mounting Holes
There are three measuring methods Graphic Size, Outside Dimensions (OD Size), or Live Area. When ordering,
tell
us the sizeThickness
and measuring style. The most popular method is Graphic Size – the actual cut sheet size of
Graphic
We
need
to
know
theisapprox.
thickness
of graphic
materials
going
into the
the poster. OD Size
the overall
size or
outer-most
length
x width
offrame.
the frame. Live Area is the viewable area
Thus, we need to know whether you’re using a thin poster, or a thicker mounted graphic up to .250” maximum. We then cut
ofthe
theframes
graphic
once
the
frame
edges
are
closed.
When
ordering
by
OD
size or Live area, we will provide the
to best fit your graphic thickness so that the frame sides close down on your graphic as nicely as possible, to
corresponding
graphic needs to be. The online system will
avoid big gaps size
at theyour
miters.
automatically show ALL 3 measurements for your convenience.
Wall Mount Instructions:
The enclosed wall mount anchors can be used
to mount your frames on drywall, plaster,
-3-
Frame 1 FF-ST Flip-Up™ 1.25”
FlipUp™ front load frame
with finger open style
Model FF-SST
Top
loading
Allor4 side
edges
flip
up for easy front load access. The FF-ST 1.25” Flip-Up™ wide
profile front load has a satin-smooth finish, making this one of our most
popular frames with Silver being the most popular finish, and many other
Slide-In™
framesIt has an overlap on the graphic insert of ½” (.50”). This frame
colors below.
Model SL-ST
is ideal for vehicle use having a strong snap down onto your graphic when
Top or side loading
uppage
to .125˝
used with the security option (See
17) to prevent blowouts. Also great
Slide-In™ frames
for slat-wall, grid-wall, retail stores, restaurants, movie posters, general
signage holders, directories, light boxes, double sided and thick graphics.
through hidden open edge
through hidden open edge
Model SL-ST
Aluminum frames
YOUR INSERT
Insert Thickness for FFST 1.25”
up to .125˝
.251˝ to .500˝
.125˝ to .250˝
“Shallow Bottom” piece
for thinner graphics up to
.125” Insert Thickness
“Deep Bottom” piece
for thicker graphics
.126”-.250” Insert Thickness
“Half Inch Bottom” piece
for thicker graphics
.251”-.500” Insert Thickness
MODEL: FFST 1.25” Profile Color Choices
1.25” wide profile, for graphics up to .50” thick. Any size made, “no max limit”
.125˝ to .250˝
.125˝ to .250˝
thin graphics up to .250˝
thin graphics up to .250˝
.89
.70
.89
.125˝ to .250˝
-4-
.70
MODEL: FFST 1.25” Profile Color Choices
1.25” wide profile, for graphics up to .50” thick. Any size made, “no max size limit”
-5-
Frame 1 FF-ST Flip-Up™ 2.50”
FF-ST WIDE
2.5” wide face
Silver Anodized
up to .125˝
FF-ST STANDARD
1.25” wide face
.125˝ to .250˝
The FF-ST 2.50” Flip-Up™ wide profile front load offers a modern wider look
from the FF-ST 1.25” frame. It has a flat smooth finish creating a contemporary
form. The frame has an overlap onto the graphic of ½” (.50”). Has a beautiful
wider appearance especially for larger graphics. Security option 1 screw down
is available (See page 17).
thin graphics up to .250˝
.125˝ to .250˝
.70
Flip-Up 2.50˝ Wide
MODEL: FFST 2.50” Profile Color Choices
2.50” wide profile, for graphics up to 1/4” thick. Any size made, “no.89
max limit”
.125˝ to .250˝
-6-
Frame 2 FF-RP Security Flip-Up™ 1.25”
The FF-RP Flip-Up™ 1.25” wide profile front load model has a built-in rounded
edge profile for instant security. In order for the frame to open, a simple flat
edge spatula tool is required to prop up the frame edge, allowing your fingers
to get under the frame edge to flip open. The frame has an overlap on the
graphic of ½” (.50”). Security option 1 screw down is available (See page 17).
˝
Insert Thickness for FFRP 1.25”
Drawing #3
50˝
Opening "round profile" security
FlipUpTM frame
Model FF-RP
.251˝ to .500˝
.125˝ to .250˝
“Shallow Bottom” piece
“Deep Bottom” piece
Opening "round profile" security
Drawingup#3
for thinner graphics
to
for thicker graphics
TM
FlipUp frame
.125” Insert Thickness
.126”-.250”
Insert
Thickness
Model
FF-RP
1. Insert chisel-style tool under
.125˝ to .250˝
frame edge and pry up gently.
thin graphics up to .250˝
“Half Inch Bottom” piece
for thicker graphics
.251”-.500” Insert Thickness
2. Use your fingers to lift up frame
edge all the way.
.70
MODEL: FFRP 1.25” Profile Color Choices
.70
1.25” wide profile, for graphics up to .50” thick. Any size made, “no max limit”
.89
COPYRIGHT 2006 PATENTS AND
TRADEMARKS STRICTLY ENFORCED
.125˝ to .250˝
.89
FF-RP 1.25˝
Simulated
Cherrywood
COPYRIGHT 2006 PATENTS AND
TRADEMARKS STRICTLY ENFORCED
.125˝ to .250˝
-7-
˝
Frame 2 FF-RP Security Flip-Up™ 1.75”
up to .125˝
FFRP WIDE ROUND
1.75” wide face
FFRP STANDARD
ROUND
1.25” wide face
Opening "round profile" security
The FF-RP Flip-Up™ 1.75”Drawing
wide#3profile
FlipUp front
frame load model
Model FF-RP
has a built-in round edge profile for instant security. In
order for the frame to open, a special flat edge tool is
required to prop up the frame edge allowing your
fingers to get underneath the frame edge to flip open.
The frame has an overlap on the graphic of 1”. Security
Opening "round profile" security
Drawing
#3 1
option
screw
down is available (See page 17).
FlipUp
frame
Model FF-RP
.125˝ to .250˝
Best choice for vehicle graphics.
TM
TM
.125˝ to .250˝
.125˝ to .250˝
thin graphics up to .250˝
.70
1. Insert chisel-style tool under
frame edge and pry up gently.
2. Use your fingers to lift up
frame edge all the way.
COPYRIGHT 2006 PATENTS AND
TRADEMARKS STRICTLY ENFORCED
Insert Thickness for FFWRP 1.75”
.89
.70
.251 to .500
.125˝ to .250˝
“Shallow Bottom” piece
for thinner graphics up to
.125” Insert Thickness
.89
COPYRIGHT 2006 PATENTS AND
TRADEMARKS STRICTLY ENFORCED
“Deep Bottom” piece
for thicker graphics
.126”-.250” Insert Thickness
“Half Inch Bottom” piece
for thicker graphics
.251”-.500” Insert Thickness
MODEL: FFWRP 1.75” Profile Color Choices
1.75”
profile, for graphics up to .50” thick. Any size made, “no max limit”
.125˝ wide
to .250˝
-8-
Frame 3 SL-ST edge load Slide-In™ 1.0”
Top or side loading
through hidden open edge
Slide-In™ frames
Model SL-ST
Top or side loading
through hidden open edge
Slide-In™ frames
Model SL-ST
Aluminum frames
YOUR INSERT
The SL-ST Slide-In™ 1.0” wide profile top or side loading frame is the
simplest and most economical frame we offer. Unlike the Flip-Up™
frame, the Slide-In™ frame edges do not flip open, but have a hidden
open cavity behind the frame where the graphic slides in. This frame
can be ordered and mounted landscape or portrait with the opening
being on the long side or the short side of the frame. The frame can
be mounted side-by-side making an illusion of one long frame with
multiple graphics, great for menu boards. The Slide-In™ frame holds
graphics up to .250” thick and only 3/8” (.375”) of the graphic perimeter is covered by the frame edges. The frame is one solid aluminum
piece with no moving elements. Anti-tamper security options 3a and
3c are available such as a removable top that screws in to completely
seal the loading edge (See page 17).
Insert Thickness for SLST 1.0”
1.0”
.71”
.375˝
.125
MODEL: SLST 1.0” Profile Color Choices
1.0” wide profile, for graphics up to .50” thick. Any size made, “no max limit”
-9-
Frame 4 Mini Flip™-Up .60”
Model: MiniFlip™
.60 inch wide profile
.60 thick, square
corners only
SILVER anodized and
Black powder only
The Mini Flip™-Up .60” wide profile front load
frame is also known as the “skinny or slim edge”
frame. This frame is the slimmest frame we
make. Custom cut to any size up to a maximum
of 36” x 48”.
All 4 edges flip open for front loading.
Only accepts thin
poster graphic
Thin graphics only
Any size made
Poster
Optional Plastic
Overlay Lens
.60˝
.60˝
Poster
Backer
.40˝
MODEL: Mini Flip .60” Profile Color Choices
MiniFlip™ Silver
MiniFlip™ Black
- 10 -
covers graphic
Frame 5 RCOR1.0™ Flip-Up™ Round Corner 1.0”
1 inch wide profile,
.43˝ thick, round
corners only
SILVER anodized and
Black powder only
Model: RCOR1.25™
TheROUND
RCOR1.0™
Flip-Up™ Round Corner 1.0” wide profile front
CORNERS
load frame has rounded corners vs. the traditional square
1.25frames.
inch wide
corner
Theprofile,
frame beautifully displays thin poster
.75˝ thick, round
graphics,
custom
cut
to any size.
corners only
All 4SILVER
edges flip
open for front loading.
anodized and
Black powder only
Thin graphics only
Thin graphics only
Any size made
Any size made
Optional Plastic
Overlay Lens
1.0˝
Poster
Poster
Backer
ROUND CORNERS
ROUND CORNERS
MODEL: RCOR 1.0” Profile Color Choices
- 11 -
.40˝
.43˝
Model: RCOR1.0™
ROUND CORNERS
covers graphic
Frame 6 RCOR1.25™ Flip-Up™ Round Corner 1.25”
Model: RCOR1.25™
ROUND CORNERS
1.25 inch wide profile,
.75˝ thick, round
corners only
The RCOR1.25™ Flip-Up™ Round Corner 1.25” wide profile
front load frame has rounded corners vs. the traditional
square corner frames. Custom cut to any size. Security
option screw down 1 is available (See page 17).
All 4 edges flip open for front loading.
SILVER anodized and
Black powder only
1.25˝
Thin graphics only
Optional Plastic
Overlay Lens
Any size made
.75˝
Poster
Poster
Backer
.40˝
ROUND CORNERS
MODEL: RCOR 1.25” Profile Color Choices
- 12 -
covers graphic
Frame 7 Armored Steel Sign Holder
Frame 7 armored steel sign holder is our highest security sign holder. This frame is tough enough
to survive any environment and stay looking beautiful. The Armored Steel Sign Holder comes
in two sizes only: 8.5”x 11 and 11” x 17 sheet holding sizes. Wall or Pole Mount. Tough enough for
prisons or high vandalism environments.
4 wall mount screw
locations, drill 3/16”
pilot hole for anchor.
For pole mount applications.
Steel straps feed through
these slots and wrap around
pole. (Straps available
separately)
MODEL: Armored Steel Sign Holder Color Choices: BLACK ONLY
Super Secure
Wall or
Pole Mount
- 13 -
Banner Grip™ 4.0” wide banner stretching frame
All 4 edges flip open for front loading.
Our Banner Grip™ frame will stretch ANY size, banner
material to a drum-tight finish for a perfect appearance.
Only raw edge b
­ anners are required, but can stretch any
banner with grommets, pole ­sockets or hemmed edges. The
banners are stretched using our patented aluminum alloy
clamps with interlocking teeth that grip onto the banner but
do not tear or pierce it. The clamps are easily tightened to
stretch out the banner perfectly, leaving no sags or wrinkles
anywhere -guaranteed. No other frame can do this, patent
protected. The frame can be used in or outside, made of
high-grade aluminum alloy and stainless steel and will not
rust or drip corrosive marks. The Banner Grip™ can also hold
rigid, but flexible substrates like solid plastic sheets or sheet
metal signs up to 1/16” thick -eliminating any “waviness” and
making such signs perfectly “flat.” the frame ships in 60”to
136˝ x 96˝ hi-res banner
80” sections (for larger frames) by UPS ground – for fast
a­ssembly on-site. Longer sections are seamlessly joined with our exclusive “joiner strap” for easy shipment
and on-site assembly. Security option 1 screw down is available (See page 17).
Banner Stretching Frame
MODEL: Banner Grip™ 4.0”
Profile Color Choices
Silver anodized
Black powder
- 14 -
Parts of Banner stretching frame
Top Hinged
Frame Top
Clamp pull back NUT;
use 3/8 wrench to turn
Mounting holes
every 18” to 24”
But you can add
as desired. Lots
of room for any
size screws.
Clamp channel “J” bracket.
You can add/remove individual
clamp at any time. Clamp will not
slide in channel once banner is
stretched. Retaining clip (optional
to use) to hold clamp in place when
banner is removed.
Flat springs
to allow spring
closure of top
Clamp
assembly
Corner angle w/
backplate that
slides into and
Spring loaded jaws stay open to
tightens into the 2
easily engage onto banner edge
corner channels
(1 of 2).
Photo: Clamp and J bracket assembly.
This is the clamp assembly that fits into the
channel and clamps onto banner to pull it
tight.
“J” Bracket
Bottom of frame
Clamp closure screw,
Hex Head Style, finger
tighten first, then use 3/8
wrench to tighten.
Optional:
Option 1 Screw Down
Screw down option so all 4
edges of frame are
tightened down onto banner
to prevent unauthorized
opening of frame sides.
Uses security screws, or
can use regular screws.
- 15 -
Pole stands and A Frames made ANY size or height
with ANY of our frames
Pole stands and A Frames made ANY size or height with ANY of our frames.
Triangular, 3 sided frames, any size,
any finish, floor or table top, minimum 1.
Table top or floor mini stands, any size,
any color or finish, minimum 1.
NEW
Graphic Clips • Clip to top and bottom of your graphic for a
Adjustable angle frames, any height or size
frames, any color or finish, minimum 1.
quick, simple display. Silver or black, with end caps, any length.
- 16 -
ecurity / Anti-Tamper options
s.com
Option 1
"Screw down Option" - patent pending
(for FlipUptm frame only)(may incur additional
Security Options
cost)
Screw down option so all 4 edges of frame are tightened down
onto insert to prevent theft or wind blow out. Also great for use
on moving vehicles since you can use less expensive, thinner
inserts, and the insert won't "rattle" inside the frame.
Accommodates inserts up to .270" thick. Use security screws,
Option 1: “Screw Down Option”
only)
frame
ew to
simply
rew
ess
of
: the
m
being
uring
LLC
828
prevents
9431
ng
"slid out"
astchangeframes.com
rames.com
Wall
g #6a
Security / Anti-Tamper options
Option 1
"Screw down Option" - patent pending
(for FlipUptm frame only)
Option 1 “Screw Down Option” – this option is
available for Frame 1, 2, 6, and 7. The screw down
option locks down all 4 flip down sides to prevent
theft or wind blow out. Accommodates inserts up
to .500” (1/2”) thick.
Screw down option so all 4 edges of frame are tightened down
Option 3c onto insert to prevent theft or wind blow out. Also great for use
moving vehicles since you can use less expensive, thinner
a
Removableon
frame
edge
inserts, and the insert won't "rattle" inside the frame.
tm
(for
Slide-In
frame only)
Option
3a:Accommodates
Blocker™
Screw
only)
inserts
up (Slide-In™
to .270" thick. Use
security screws,
screw
Option 3a “Blocker™ Screw” – Only available for
Must remove frame edge to load or remove inserts.
-Intm frame only)
Frame 3 Slide-In frame. The blocker screw is the
quickest security option we offer -with no frame
parts to remove. The security screw is simply a
center mounted screw hardly visible on the slide-in
portion of the frame. Blocks inserts from being
“slid out.”
2 front mounted security screws (also we can provide
ert changes, no frame
or headless screws that can be opened with
ve. Blocker screwheaded
to
common tools)
of insert. This is simply
nted security screw
egular or headless
slide-in portion of the
s the insert from being
Blocker screw prevents
insert from being "slid out"
Wall
Option 3c
Removable frame edge
2 front
mounted security screws.
tm frame
(for Slide-In
only)
Benefits:
Easy and
fast
Must remove frame
edge
toremoval
load orofremove inserts.
#6b
withscrews
hand Drawing
or (also we can
2 front mountedscrews
security
provideSecurity Screws and
Drawing
#6b
Security
Screws and Tools
cordless
tools. that
Greatcan
for be opened
headed or headless
screws
with
Manufactured by:
frequent insert changes.
common
tools)
Option 3C (Slide-In™
frame
only)
Alpina
Manufacturing LLC
Manufactured
by:
Tools
Option 3c “Removable Frame Edge” – Only available
for Frame 3 Slide-In frame. Option 3c is our most
e-mail: AND
[email protected]
Fax: 1-800-217-9431
COPYRIGHT
2006 PATENTS
TRADEMARKS
ENFORCED
www.fastchangeframes.com
e-mail: STRICTLY
[email protected]
popular security option for the Slide-In™ Frame.
www.fastchangeframes.com
This option completely closes all four sides to
prevent removal of your graphic. Two front mounted
Drawing #6b Security Screws and Tools PER DRAWING
security
6a: screws are placed on the upper section
PER
DRAWING
6a:
Option 1, Option
3a,
Optionside
3c security
add-ons
Manufactured by:
below
loading
ofadd-ons
the insert.
To insert graphic,
Alpina Manufacturing LLC
Option
1,
3a,
Option
security
TheOption
security
options
on
Drawing 3c
6a will
require tools
as shown here.
2 front mounted
security
screws.
Tel: 1-800-915-2828
the
frame
edge
is that
removed,
graphic loaded, frame
TheBenefits:
securityWe
options
on Drawing
6atamper
will
require
toolsscrews
as shown
here.
use “Pin
in TORX”
resistant
can open with only a special
Fax: 1-800-217-9431
andinfast
removal
of resistant
WeEasy
use “Pin
TORX”
tamper
screws
that
can
open
with
only
a
special
e-mail: [email protected]
replaced.
security tool. Pin inedge
HEX style
screws are also available upon request.
screws with hand or
Tel: 1-800-915-2828
Alpina Manufacturing LLC
Removable frame
edge
Fax: 1-800-217-9431
Tel: 1-800-915-2828
www.fastchangeframes.com
security tool. Pin in HEX style screws are also available upon request.
cordless tools. Great for
frequent insert changes.
2006 PATENTS AND
PER DRAWING
6a: Tools for optionCOPYRIGHT
Security
Screws and
1, option
3a, and
option 3c security add-ons. The security options
TRADEMARKS
STRICTLY
ENFORCED
Option
1, Option
3a, Option
3c security
require
tools
as shown
here. We
use “Pin add-ons
in TORX” tamper resistant screws that can open with only a special
The security options on Drawing 6a will require tools as shown here.
security
tool
nottamper
available
thethatgeneral
public.
Pin in HEX style screws are also available upon request.
We use “Pin
in TORX”
resistantto
screws
can open with
only a special
security tool. Pin in HEX style screws are also available upon request.
Pin in TORX security screw
Insert Bit and L Key to remove TORX security screws. Pin
Weincan
supply
TORX
security hand
screw operated “L” keys or bits to use
with manual or cordless power drivers.
Insert Bit to remove TORX security
- security
17shank
- to use with
Insert Bit to screws.
remove TORX
Pin in TORX security screw
Has 1/4”
screws. Hasmanual
1/4” shank
to use with
or cordless
power drivers.
manual or cordless
power
Fastest way todrivers.
spin out the screws,
L Key to remove TORX
L Key to remove
TORX
security
screws.
security screws.
Hand operated.
Hand operated.
g #10
Overlays and Backers
Overlay lenses, frame backers and other options
by:
cturing LLC
-2828
7-9431
@fastchangeframes.com
eframes.com
e available for overlays
re 48” x 72”
Overlay
Backer
Protect and enhance the beauty of your graphic. Clear plastic protective overlay windows are approx. 20
Overlay
lenses:
Protect
and enhance
beauty
graphics
a clear
protective overlay
or 40 mils thick
for larger
frames.
Overlays
are PETGthe
plastic
andofare
flexible,with
super
clear plastic
high grade
not crack and are
ideal for
use in these frames.
You can
alsoOverlays
use yourare
ownhigh
acrylic
style
"overlay"
if you
windows
approximately
.020” (20mil)
thick.
grade
PETG
plastic,
are super clear,
will not crack and are ideal for use in our frames. Totally clear and non-glare options available, as
lack styrene plastic,
mil /- .040"
forlenses.
a very thin profile frame. Backers are.125” thick for Slide-In
well as40.040
.060”thick,
thicker
backer options available.
Backers: For the Flip Up™ frames the backer is .040” (40mil) thick black styrene plastic for thin
inserts. For slide-In™ frames the backers are typically .157” (4mm) thick black corrugated plastic.
dows will protect
yourbacker
graphic
and enhance
its appearance.
Other
options
are available
including hardboard and aluminum. We use .040” thin backers
s and backers are separately priced options and are not mandatory for the frame.
to make the frames as slim as possible, since once frames are mounted on the wall, the frames
me grips your graphic on all 4 edges and the wall acts as the "backer" -since the graphic lies in the frame
areit'ssuper
and
nst the wall. But
your rigid
choice
to sturdy.
have a backer, as it may help smooth out a thin poster graphic, or if
rames
g frame to an uneven surface. Thicker mounted graphics don't need a backer.
Hanging
of our
change
frames
available
with basicout
drywall
orfront
hardwall
purchase 2 overlays
for aOptions:
frame. 1All
would
actfast
as the
"backer"
andare
then
can be switched
with the
Other mounting
options:
D-Rings
for hanging
from
ceiling
fixtures or in
gets damagedmounting
or worn. hardware.
For larger frames,
the overlay
and backer
are great
sent rolled
up. They
quickly
flatten
d in the frame. windows. Magnet backs for steel doors or walls, Slatwall or Gridwall hooks, Double Sided Tape or
frames
Velcro.
Double-Sided
Frames:
Our frames can be mounted back to back to create a double sided frame.
need an overlay
and backer for
this frame.
phic is "sandwiched"
betweenare
thenecessary.
overlay and backer and then "slid" into the frame.
Two graphics
e overlay and backer to retain the poster in the frame, since this frame does not “grip”
l 4 sides as theFloor
FlipUp
frame we
does.
Stands:
can make any size frame A Frames and floorstands, 1 or 10,000 no minimum
r-rigid-mountedand
graphic,
you
don't
need the overlay and backer, unless you want the overlay to protect
fast!
the image.
kers = Typically 3mm / .125" thick corrugated black plastic.
ally sent assembled when 22" x 28" and smaller, and un-assembled when larger. Frame assembly is fast
ctions and corner hardware are included, takes a few minutes. For larger un-assembled frames, if you
verlay and backer, they would be sent "rolled up" in a box. After the frame is assembled, the un-rolled
s installed and will quickly flatten out..
- 18 -
COPYRIGHT 2006 PATENTS AND
TRADEMARKS STRICTLY ENFORCED
Customer Supplied Pictures of frame installations:
California Pizza Kitchen
NYC 9/11 Memorial Banner
Chicago Transit Authority CTA Station
Film Studio in Hollywood
Office
Fast Food Restaurant
- 19 -
Email or call us for free samples, pricing and delivery time on any size frames.
We make frames fast and at low cost, let us prove it to you !
Fast Change Frames
Alpina Manufacturing LLC
3418 North Knox Avenue • Chicago, Illinois, 60641
TEL 1-800-915-2828 • FAX 1-800-217-9431
[email protected]
fastchangeframes.com • bannergrip.com
American Owned
American Made
Displaying Graphics Beautifully