pdf Flow-Trak™ II Product Literature - Micro

®
®
Accurate Application
S prayer M onitor
The FlowTrak II is a user-friendly monitor for
farmers, custom applicators and groundskeepers
needing a simple, low-cost way to achieve greater
accuracy when applying liquid chemicals. It’s
easy to install & operate, and its rugged design
makes it the perfect fit for your operation.
Features include:
• “Control” output that can turn a valve or pump
On/Off for batch control.
• TRIPLE counters for volume and area.
• Track tank volume, with a handy tank alarm
standard.
•
Troubleshooting enhancements include “No
Flow” & “No Speed” warning messages.
DESIGNED FOR YOU:
The FlowTrak II provides a complete picture
of critical spraying functions and an
accurate record of work performed
GROUND SPEED
Displays ground speed in miles per hour (kph)
LINEAR DISTANCE TRAVELED
Displays distance traveled in feet (meters)
RATE
Measures/displays the amount of liquid applied per unit of area
FLOW RATE
•
High Contrast Liquid Crystal Display with large easy-to read numbers.
•
Heavy duty rotary switch for quick and precise function selection.
•
Push-button run/hold, counter reset and
calibration keys.
Records/displays the total amount of liquid applied;
3 independent counters
•
Durable Hall-effect speed and flowmeter
sensors.
•
•
Keeps count of the total acres (hectares) (thousands
of square feet) worked; 3 independent counters
Weatherproof cable connectors.
Measures/displays the amount of liquid applied per minute
VOLUME
AREA
TANK
Back-lit front panel for night operation.
Displays gallons (liters) of liquid remaining
AREA PER HOUR
®
®
Displays current work rate in acres per hour (hectares per hour) (thousands of square feet per hour)
Measurements can be displayed in English or Metric.
System Options
Model FM500
Flow Range: .05 to 5
gallons per minute (1
to 19 liters per minute)
Max. Oper. Pressure:
500 PSI (35-bar)
Model FM750 GFN
Flow Range: 2 to 40
gallons per minute
(7 to 150 liters per
minute)
Max. Oper. Pressure:
150 PSI (10-bar)
Flowmeters
Model FM750 SS
Model FM1000
Model FM1500 SS
Flow Range: 2 to 40
gallons per minute (7 to
150 liters per minute)
Flow Range: 3.5 to 70
gallons per minute
(13 to 265 liters per
minute)
Flow Range: 10 to 130
gallons per minute
(38 to 492 liters per
minute)
Max. Oper. Pressure:
500 PSI (35-bar)
Max. Oper. Pressure:
500 PSI (35-bar)
Max. Oper. Pressure:
500 PSI (35-bar); higher
pressure models available
Models FM270
FM10-100
FM270 Flow Range:
3.5 to 70 gallons per
minute (13 to 265 liters
per minute)
Max. Oper. Pressure:
125 PSI (8.9-bar)
FM10-100 same as
FM270 except for the
following:
Con s o le Fu n c tio n s
VOLUME (1) (2) (3): Displays total gallons (liters) applied. Maybe
reset. (Note: VOLUME and AREA counters work in pairs, if VOLUME
counter 1 is reset, it also resets AREA
counter 1.
FM10-100 Flow Range:
10 to 100 gallons per minute
(38 to 380 liters per minute)
AREA (1) (2) (3): Keeps running count of the total acres ( hectares)
(thousands of square feet) worked. May be re s e t . (Note: VOLUME &
AREA counters work in pairs, if AREA counter
1 is reset, it also resets VOLUME counter 1.)
VOLUME/MINUTE : Displays gallons
DISTANCE: Displays distance traveled
in feet (meters). May be reset.
TANK: Displays gallons ( liters) of liquid
AREA/ HOUR: Displays current work
rate in acres per hour (hectares per hour)
(thousands of square feet per hour).
(liters) of liquid applied per minute.
remaining.
RATE: Displays application rate GPA(LPH).
RUN/ HOLD:
SPEED: Displays ground speed in miles
per hour (kilometers per hour).
CAL: This key is used to enter & exit the
PROGRAM KEYS: Used to increment
and decrement the different calibration
values.
Key which changes between run and hold modes of operation.
calibration mode.
•
RESET when not in CAL, clears the
selected counter when held for two
seconds while in hold.
WARNING LIGHT: Indicates over
or under application of 10% of the
Target Rate, or below min flow or
tank set point. Also lit when in CAL.
• When in CAL , the “+” key increases and
the “-” decreases the value displayed.
The Astro Series of GPS-Based Speed Sensors
Vansco Radar
The Astro GPS Speed Sensors are a direct replacement for magnetic
wheel speed sensors or radar guns and can interface to most brands
of monitors and controllers.
The Vansco radar speed sensor combines
state-of-the-art electronic design and manufacturing to deliver a reliable and accurate
speed signal for mobile equipment.
The Astro includes 2 red status lights
on the interface module, indicating
power and satellite fix.
TM
Adapter cables are available for all Micro-Trak
monitors and control systems.
The Astro II is an accurate and
economical 1 HZ GPS receiver.
The Astro 5 offers a 5 HZ receiver for faster response to speed
changes.
Innovative Technologies
for Tomorrow's Challenges
P. O. Box 99 • Eagle Lake, MN 56024
For a complete distributor/dealer listing visit
www.micro-trak.com or call us at 800-328-9613
©2008 Micro-Trak Systems, Inc.