BioNutrient
TM
TM
Copper+
4-0-0
Nutritional Copper Supplement
for Foliar Application
Guaranteed Analysis
Total Nitrogen (N)
4.0% Urea Nitrogen (N)
Copper (Cu)
4.5% Water Soluble Copper (Cu)
4.0%
4.5%
Derived from Urea and Copper Sulfate.
May be Harmful if Swallowed. May Cause Skin and Eye Irritation.
KEEP OUT OF REACH OF CHILDREN.
Manufactured by:
Cytozyme Laboratories, Inc.
2700 South 600 West
South Salt Lake City, UT 84115, USA
2.5 U.S. Gallons / 9.5 Liters
Net Weight: 25.8 lb / 11.69 kg
LECFM22 BBBD
BioNutrient
TM
TM
Copper+
RECOMMENDED APPLICATION RATES:
Normal maintenance: 0.5 liters per hectare (7 fl oz/acre)
Moderate deficiency: 1 liter per hectare (14 fl oz/acre)
Severe deficiency: 1.5 liters per hectare (20 fl oz/acre)
For higher deficiency (lower soil and/or leaf test values) use higher rates. Repeat application until symptoms
disappear or leaf analyses confirm adequate nutrient concentrations in plant tissue. Rates and timing of
applications depend on local conditions and should always be based on soil and/or plant tissue analysis.
Consult local agricultural experts if needed.
Copper deficiencies are best corrected before visual symptoms appear.
CROP RECOMMENDATIONS:
Fruit trees: Apply 0.5–1.5 liters per hectare (7-20 fl oz per acre) at swollen bud, post-harvest and as needed to
correct deficiencies.
Kiwi: Apply 0.5–1.5 liters per hectare (7-20 fl oz per acre) at swollen bud, post-harvest and as needed to correct
deficiencies.
Berries: Apply 0.5–1.5 liters per hectare (7-20 fl oz per acre) at bloom and as needed to correct deficiencies.
Grapes: Apply 0.5–1.5 liters per hectare (7-20 fl oz per acre) at 3-4 leaves and as needed to correct deficiencies.
Field crops and vegetables: Apply 0.5–1.5 liters per hectare (7-20 fl oz per acre) as needed to correct deficiencies.
APPLICATION: SHAKE WELL before using. Dilute with water to obtain uniform coverage. Dilution depends on
spraying equipment. For high volume sprayers dilute 1:200 to 1:1000. For low volume sprayers dilute 1:40 to 1:100.
To co-apply with agrochemicals, dilute 1 part BioNutrient Copper+ with 5 parts water prior to mixing with pre-diluted
chemicals. For optimal absorption and compatibility with other products adjust pH of the mixture to 5.5 - 6.5.
Because available formulations of agrochemicals differ widely, a small test area should be treated prior to large scale
mixing to determine that no undesirable effects occur. For best results apply in the evening or early morning.
STORAGE: Store at temperatures between freezing and 43°C (110°F). Keep container tightly closed. Do not
store diluted product. Do not store in direct sunlight.
LIMITED WARRANTY: Cytozyme Laboratories, Inc. warrants that this product conforms to the description on
the label within customary industry standards. The conditions and methods of handling are beyond the control
of Cytozyme Laboratories, Inc. As such, this warranty extends only to the identity and composition at the time
of delivery. Cytozyme Laboratories, Inc. expressly disclaims liability for any loss connected with misuse of this
product. (This limitation of warranty is void where prohibited by law.)
IMPORTANT NOTICE: Read the entire label. Use only in accordance with the label instructions. Use in
conjunction with a normal fertilizer program. BioNutrient Copper+ is intended as a supplement to a regular
fertilizer program and will not, by itself, provide all the nutrients normally required by plants. If terms of Limited
Warranty section are not acceptable, return unopened product at once.
Information regarding the content and levels of metals in this product is available on the internet at
http://www.aapfco.org/metals.htm
LECFM22 BBBD