erie water treatment
a division of Aquion, Inc.
Lammerdries-Oost 30c
B-2250 Olen - Belgium
T +32 (0)14 28 51 71
[email protected]
2080 E. Lunt Avenue
Elk Grove Village, IL 60007
T +1 (800) 811 3489
[email protected]
www.erie-softena.com
CABINET SOFTENER
QUESTION:
• How
to protect your water-using appliances, increase the efficiency of your water heater, reduce
soap and detergent use, simplify cleaning, and all
of this with one single appliance?
HARD WATER, YOUR PROBLEM ?
Hard water causes limescale; the negative effects of this are clearly visible
through your entire home. Everybody knows that limescale deposits in your
pipes can cause the pipes to clog which will lead to reduced water flow
and ultimately even to replacement of your pipes. But your problems go
further than that! Untreated - hard - water is responsible for premature
failure and/or loss of efficiency of many of your household appliances
that use water.
Your boiler is a typical example. Hard water contains calcium and magnesium ions and when it is heated, these minerals form a hard layer
of scale inside your water heater. This build-up of scale will continue
as more and more hard water is heated and will ultimately lead to a
blocked water heater.
ANSWER:
• Install a water softener, and do it today!
TECHNICAL SPECIFICATIONS
Model
“… Manufacturers of water heaters worldwide recognize the problem of untreated water; today the use of hard water is one of the main reasons why
a repair of your water heater is necessary.”
Hard water is probably the most common water problem found in the
home. Hard water:
> increases the consumption of soap and synthetic detergents;
> leaves unsightly soap scum rings in bathtubs and sinks;
> spots and streaks glassware and dishes;
> makes bathing more difficult for hair and sensitive skin;
> causes scale deposit in all water-using appliances;
> clogs hot water pipes;
> …
Integrated electronic control panel (= easy access)
RESIN (CUFT)
Operating pressure min/max (psi)
Operating temperature min/max (°F)
Electrical connection (V/Hz)
Max. power consumption (VA)
Hydraulic connection inlet/outlet
(1)
SOF-CS-Eco
.5
.7
20 / 120
35 / 120
110 / 60(1)
17
¾’’ NPT Male
1.1
Supplied with 24V transformer
PERFORMANCES(2)
Model
RESIN (CUFT)
Nominal exchange capacity (kilograins)
Salt usage per regeneration (lb)(3)
Exchange capacity per kg salt (kilograins)
Service flow rate @ 15 psi pressure drop (gpm)
Recommended maximum service flow (gpm)(4)
Rinse water usage per regeneration (gal)(3)
Recommended maximum service flow (m3/hr)(4)
Rinse water usage per regeneration (Ltr)(3)
EAZY software (= 4 step programming)
Indicative numbers, performances depending on operating conditions and water quality
Maximum salt/water usage as brining is proportional (minimum of 60%)
(4)
Flow rate at which softening process is still executed adequately
High-flow control valve (= minimal pressure loss)
DIMENSIONS & WEIGHTS
SOF-CS-Eco
.5
10.6
4.2
2.5
9.2
6.6
21.1
1,5
80
.7
15.9
5.5
2.9
9.7
8.8
26.7
2,0
101
1.1
25.4
8.8
2.9
8.8
14.1
41.2
3,2
156
(2)
(3)
Separate salt lid (= easy salt refill)
Proportional up-flow brining (= low salt&water usage)
‘Uniform bead’ food grade resin (= optimal operating efficiency)
Safety float (= double security)
Model
RESIN (CUFT)
Width (inch)
Height (inch)
Depth (inch)
Depth, including bypass (inch)
Weight (lb)
Maximum salt storage capacity (lb)
! Eco+ configuration: recommended for treatment of non-municipal water
SOF-CS-Eco
.5
31 ¾
53
165
.7
22 ½
31 ¾
13 ½
16 ½
63
165
1.1
42 ¾
90
275