Product Specifications
HBX
HBX--6511DS
6511DS--T10M
2-port small cell antenna, 2x 1710–2180 MHz, 65° HPBW, fixed electrical tilt
l
Superior azimuth tracking and pattern symmetry to minimize any sector overlap
l
State-of-the-art radiating elements
l
Excellent upper sidelobe suppression
l
Wall mounted antenna; variable azimuth wall mount (648219-1) available, not included
Electrical Specifications
Frequency Band, MHz
Gain, dBi
Beamwidth, Horizontal, degrees
Beamwidth, Vertical, degrees
Beam Tilt, degrees
USLS (First Lobe), dB
Front-to-Back Ratio at 180°, dB
CPR at Boresight, dB
CPR at Sector, dB
Isolation, dB
VSWR | Return Loss, dB
PIM, 3rd Order, 2 x 20 W, dBc
Input Power per Port, maximum, watts
Polarization
Impedance
1710–1880
12.0
67
23.5
10
17
32
22
13
30
1850–1990
12.0
66
22.2
10
17
32
20
11
30
1920–2180
12.6
63
21.8
10
17
32
20
11
30
1.4 | 15.6
1.4 | 15.6
1.4 | 15.6
-150
100
±45°
50 ohm
-150
100
±45°
50 ohm
-150
100
±45°
50 ohm
Electrical Specifications, BASTA*
Frequency Band, MHz
Gain by all Beam Tilts, average, dBi
Gain by all Beam Tilts Tolerance, dB
Beamwidth, Horizontal Tolerance, degrees
Beamwidth, Vertical Tolerance, degrees
USLS, beampeak to 20° above beampeak, dB
Front-to-Back Total Power at 180° ± 30°, dB
CPR at Boresight, dB
CPR at Sector, dB
1710–1880
11.9
±0.5
±1.8
±2.6
16
24
24
13
1850–1990
11.9
±0.2
±2.8
±1.2
16
26
22
11
1920–2180
12.2
±0.5
±5.8
±1.1
16
26
21
11
* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA,
download the whitepaper Time to Raise the Bar on BSAs.
General Specifications
Operating Frequency Band
1710 – 2180 MHz
Antenna Type
Small Cell
Band
Single band
Includes
Wall mount bracket
Performance Note
Outdoor usage
Mechanical Specifications
RF Connector Quantity, total
2
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 25, 2017
page 1 of 2
June 14, 2017
Product Specifications
HBX
HBX--6511DS
6511DS--T10M
RF Connector Quantity, high band 2
RF Connector Interface
7-16 DIN Female
Color
Light gray
Grounding Type
RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material
Low loss circuit board
Radome Material
UV protected radome
RF Connector Location
Bottom
Wind Loading, frontal
66.0 N @ 150 km/h
14.8 lbf @ 150 km/h
Wind Loading, lateral
16.0 N @ 150 km/h
3.6 lbf @ 150 km/h
Wind Loading, rear
81.0 N @ 150 km/h
18.2 lbf @ 150 km/h
Wind Speed, maximum
241 km/h
|
150 mph
Length
387.0 mm
|
15.2 in
Width
166.0 mm | 6.5 in
Depth
83.0 mm | 3.3 in
Dimensions
Net Weight, without mounting kit 2.2 kg
|
4.9 lb
Packed Dimensions
Length
520.0 mm
|
20.5 in
Width
395.0 mm
|
15.6 in
Depth
262.0 mm
|
10.3 in
Shipping Weight
5.4 kg
|
11.9 lb
Regulatory Compliance/Certifications
Agency
RoHS 2011/65/EU
China RoHS SJ/T 11364-2006
ISO 9001:2008
Classification
Compliant by Exemption
Above Maximum Concentration Value (MCV)
Designed, manufactured and/or distributed under this quality management system
* Footnotes
Performance Note
Severe environmental conditions may degrade optimum performance
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 25, 2017
page 2 of 2
June 14, 2017