MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP–COG TYPE GRM SERIES FEATURES ■ Miniature size ■ No Polarity ■ Nickel Barrier Termination Standard – highly resistant to metal migration ■ Uniform dimensions and configuration ■ Flow for GRM39, 40, 42-6 and Reflow Solderable ■ Minimum series inductance ■ Tape and Reel Packaging ■ Wide selection of capacitance values and voltages ■ Largest production capacity and volume in the world DIMENSIONS: mm L W Size EIA Code L Length W Width T Thickness g (min.) Insulation e (min.) Termination GRM36 0402 1.0 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.3 0.1 GRM39 0603 1.6 ± 0.1 0.80 ± 0.1 0.8 ± 0.1 0.5 0.35 ± 0.15 GRM40 0805 2.0 ± 0.15 1.25 ± 0.15 1.40 max. 0.75 0.5 ± 0.25 GRM42-6 1206 3.2 ± 0.15 1.6 ± 0.15 1.25 max. 1.0 0.55 ± 0.25 GRM42-2 1210 3.2 ± 0.15 2.5 ± 0.15 1.5 max. 1.0 0.5 ± 0.25 GRM43-2 1812 4.6 ± 0.3 3.2 ± 0.2 2.75 max. 2.0 0.25 GRM44-1 2220 5.6 ± 0.3 5.1 + 0.25 – 0.5 2.75 max. 2.0 0.25 T e g min. e SPECIFICATIONS Rated Voltage/Temperature Characteristics/Capacitance Value Type 50V COG 100V 200V — — GRM36 1.0 ~ 160pF GRM39 1.0 ~ 510pF 1.0 ~ 160pF 1.0 ~ 10pF GRM40 1.0 ~ 2400pF 1.0 ~ 680pF 1.0 ~ 220pF GRM42-6 1.0 ~ 6200pF 1.0 ~ 2200pF 1.0 ~ 470pF GRM42-2 100 ~ 7500pF 100 ~ 4300pF 100 ~ 1000pF GRM43-2 1000pF ~ .013F 1000pF ~ .012F 330pF ~ 2700pF GRM44-1 1000pF ~ .049F 1000pF ~ .030F 1000pF ~ 6200pF GRM40 CAPACITOR TYPE AND SIZE 3-DIGIT CODE appears as necessary to indicate special thickness requirements. Please consult your local sales office for details. TEMPERATURE CHARACTERISTICS COG P2H R2H S2H T2H U2J SL ––– COG 101 CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For fractional values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. J 050 CAPACITANCE TOLERANCE 5pF or less C = ± .25pF >5pF ⱕ 10pF D = ± .5pF >10pF J = ±5% K = 10% A D VOLTAGE Identified by a three-digit number. MARKING A = Unmarked For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 6 PACKAGING Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch Code D L J K B C Q MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP – TEMPERATURE COMPENSATING TYPE GRM SERIES ■ Miniature size ■ No Polarity ■ Nickel Barrier Termination Standard – highly resistant to metal migration ■ Uniform dimensions and configuration ■ Flow for GRM39, 40, 42-6 and Reflow Solderable ■ Minimum series inductance ■ Tape and Reel Packaging ■ Wide selection of capacitance values and voltages CAPACITORS ■ Largest production capacity and volume in the world FEATURES DIMENSIONS: mm L W T e g min. e Size EIA Code L Length W Width T Thickness g (min.) Insulation e (min.) Termination GRM36 0402 1.0 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.3 0.1 GRM39 0603 1.6 ± 0.1 0.80 ± 0.1 0.8 ± 0.1 0.5 0.35 ± 0.15 GRM40 0805 2.0 ± 0.15 1.25 ± 0.15 1.40 max. 0.75 0.5 ± 0.25 GRM42-6 1206 3.2 ± 0.15 1.6 ± 0.15 1.25 max. 1.0 0.55 ± 0.25 GRM42-2 1210 3.2 ± 0.15 2.5 ± 0.15 1.5 max. 1.0 0.5 ± 0.25 GRM43-2 1812 4.6 ± 0.3 3.2 ± 0.2 2.75 max. 2.0 0.25 GRM44-1 2220 5.6 ± 0.3 5.1 + 0.25 – 0.5 2.75 max. 2.0 0.25 Temperature Characteristics/Capacitance Value Type P2H 50V R2H 100V S2H T2H U2J SL 50V 100V 50V 100V 50V 100V 50V 100V 1.0 ~ 750pF 1.0 ~ 430pF 50V 100V GRM39 1.0 ~ 160pF 1.0 ~ 120pF 1.0 ~ 160pF 1.0 ~ 150pF 1.0 ~ 220pF 1.0 ~ 120pF 1.0 ~ 390pF 1.0 ~ 39pF GRM40 1.0 ~ 620pF 1.0 ~ 470pF 1.0 ~ 750pF 1.0 ~ 560pF 1.0 ~ 820pF 1.0~620pF 1.0 ~ 1800pF 1.0 ~ 220pF 1.0 ~ 3300pF 1.0 ~ 2000pF 1.0 ~ 3300pF 1.0 ~ 2000pF 1.0 ~ 750pF 1.0 ~ 430pF GRM42-6 1.0 ~ 1600pF 1.0 ~ 1300pF 1.0 ~ 1600pF 1.0 ~ 1600pF 1.0 ~ 2000pF 1.0 ~1600pF 1.0 ~ 4300pF 1.0 ~ 510pF 1.0 ~ 8200pF 1.0 ~ 4700pF 1.0 ~ 8200pF 1.0 ~ 4900pF GRM40 CAPACITOR TYPE AND SIZE 3-DIGIT CODE appears as necessary to indicate special thickness requirements. Please consult your local sales office for details. ––– TEMPERATURE CHARACTERISTICS COG P2H R2H S2H T2H U2J SL COG 101 CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For fractional values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. J 050 CAPACITANCE TOLERANCE 5pF or less C = ±.25pF >5pF ⱕ 10pF D = ±.5pF >10pF J = ±5% A D VOLTAGE Identified by a three-digit number. MARKING A = Unmarked PACKAGING Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch Code D L J K B C Q For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 7 MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP– HIGH DIELECTRIC CONSTANT TYPE X7R,Y5V GRM SERIES FEATURES ■ Miniature size ■ No Polarity ■ Nickel Barrier Termination Standard – highly resistant to metal migration ■ Uniform dimensions and configuration ■ Flow for GRM39, 40, 42-6 and Reflow Solderable ■ Minimum series inductance ■ Tape and Reel Packaging ■ Wide selection of capacitance values and voltages ■ Largest production capacity and volume in the world DIMENSIONS: mm L W T e g min. e Size EIA Code L Length W Width T Thickness g (min.) Insulation e (min.) Termination GRM36 GRM39 GRM40 GRM42-6 GRM42-2 GRM43-2 GRM44-1 0402 0603 0805 1206 1210 1812 2220 1.0 ± 0.05 1.6 ± 0.1 2.0 ± 0.15 3.2 ± 0.15 3.2 ± 0.15 4.6 ± 0.3 5.6 ± 0.3 0.5 ± 0.05 0.80 ± 0.1 1.25 ± 0.15 1.6 ± 0.15 2.5 ± 0.15 3.2 ± 0.2 5.1 + 0.25 – 0.5 0.5 ± 0.05 0.8 ± 0.1 1.40 max. 1.25 max. 1.5 max. 2.75 max. 2.75 max. 0.3 0.5 0.75 1.0 1.0 2.0 2.0 0.1 0.35 ± 0.15 0.5 ± 0.25 0.55 ± 0.25 0.5 ± 0.25 0.25 0.25 SPECIFICATIONS Temperature Characteristics/Rated Voltage/Capacitance Value Type X7R Y5V 10V 16V 25V 50V 100V GRM36 — 8200pF ~ .022F 4700pF ~ 6800pF 220pF ~ 3900pF — GRM39 .12F ~ .22F .012F ~ .1F 3900pF ~ .047F 220pF ~ .018F GRM40 .56F ~ 1.0F .015F ~ .47F 2000pF ~ .15F GRM42-6 2.2F ~ 4.7F .1F ~ 1.0F GRM42-2 — GRM43-2 GRM44-1 200V 10V 16V 25V 50V 100V — — .033F ~ .11F .022F 1000pF ~ .015F — 220pF ~ 3400pF 220pF ~ 1800pF .47F ~ 1.0F .033F ~ .22F 1000pF ~ .15F 1000pF ~ .068F 1200pF ~ 4700pF 220pF ~ .1F 220pF ~ .015F 220pF ~ .01F 2.2F .1F ~ 2.2F 2200pF ~ .33F 2200pF ~ .22F 1000pF ~ .022F .022F ~ .33F 1000pF ~ .15F 1000pF ~ .039F 1000pF ~ .022F 4.7F* .15F ~ 4.7F .068F ~ 1.5F .01F ~ .47F .01F ~ .057F .12F ~ 1.5F .022F ~ .33F .068F ~ .22F .027 ~ .1F 1500pF ~ .047F — .68F ~ 2.2F 1.0F ~ 1.5F .68F .047F ~ .12F — .39F ~ .56F .1F ~ .56F .01F ~ .47F .012F ~ .22F .01F ~ .15F — 3.3F 1.5F 1.5F .15F ~ .33F — — .47F ~ 1.2F 0.56F ~ 1.2F .056F ~ .56F .022F ~ .27F — — 2.2F 4.7F .33F ~ .68F *4T dimension = 1.6 ± .2mm PART NUMBERING SYSTEM GRM40 CAPACITOR TYPE AND SIZE 3-DIGIT CODE appears as necessary to indicate special thickness requirements. Please consult your local sales office for details. ––– TEMPERATURE CHARACTERISTICS X7R Y5V X7R 103 CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. K 050 A CAPACITANCE TOLERANCE X7R: K = ±10% M = ±20% Y5V: Z = +80 –20 % D VOLTAGE Identified by a three-digit number. For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 8 MARKING A = Unmarked PACKAGING Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch Code D L J K B C Q FEATURES APPLICATIONS ■ This series is suited to flow and reflow soldering. Capacitor terminations are made of metal highly resistant to migration. ■ Large capacitance values enable excellent by-pass effects to be realized. ■ Its thin package makes this series ideally suited for the production of small electronic products and for mounting underneath ICs. ■ Thin equipment such as IC cards CAPACITORS MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP – NICKEL BARRIER TERMINATION THIN TYPE GRM SERIES DIMENSIONS: mm W g Size L Length W Width T Thickness g (min.) Insulation e (min.) Termination GRM40-024 2.0 ± 0.1 1.25 ± 0.1 0.5 max. 0.7 0.2 GRM42-625 3.2 ± 0.15 0.6 max. 1.5 0.3 T L e 1.6 ± 0.15 SPECIFICATIONS Type GRM40-024 GRM42-625 Rated COG SL X7R Y5V 50V 0.5 ~ 360 220 ~ 470 220 ~ 6800 10000 25V — — 8200 ~ 10000 15000 ~ 33000 16V — — 12000 ~ 27000 47000 ~ 100000 25V — — — 150000 ~ 220000 GRM42-625 CAPACITOR TYPE AND SIZE Temperature Characteristics/Capacitance Value Voltage TEMPERATURE CHARACTERISTICS COG SL X7R Y5V Y5V 224 CAPACITANCE CODE Expressed in picofarads and identified by a three-digit code. First two digits represent significant figures. Last digit specifies the number of zeros to follow. Z CAPACITANCE TOLERANCE C = ±.25pF D = ±.5pF J = ±5% K = ±10% M = ±20% Z = +80 –20 % 025 A RATED VOLTAGE Identified by a threedigit number. D MARKING A = Unmarked PACKAGING CODE Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch Code D L J K B C Q For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 9 MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP – TANTALUM REPLACEMENT TYPE GRM SERIES These new monolithic ceramic chip capacitors are specifically designed to replace tantalum and aluminum electrolytic capacitors in a variety of applications. The high frequency performance of these devices make them particularly suitable for use in secondary suppression circuits in switching power supplies and other circuits with high frequency performance requirements. Lower ESR yields lower net impedance at higher frequencies. Thus a lower value of ceramic capacitance may be sufficient in bypassing and decoupling circuits. Greater surface mounting flexibility and long-term reliability of ceramic capacitors adds to their overall performance vs. cost ratio as compared to electrolytics. FEATURES* ■ ■ ■ ■ ■ ■ ■ ■ Lower equivalent series resistance Lower dissipation factor Higher insulation resistance Higher break-down voltage No polarity considerations Long term dielectric stability Wider solder profile capability Solvent wash compatibility *When compared to electrolytic capacitors DIMENSIONS: mm EIA Code L Length W Width T Thickness GRM39 0603 1.6 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 GRM40 0805 2.0 ± 0.15 1.25 ± 0.15 1.35 max. GRM42-6 1206 3.2 ± 0.15 1.6 ± 0.15 1.25 max. Type T W L SPECIFICATIONS Type GRM39 Temperature Characteristics/Capacitance Value Rated Voltage X7R 10V — 16V 0.1F 25V — 10V 1.0F — 2.2F 16V 0.22F 0.47F 0.47F ~ 2.2F 25V 0.1F 50V — 10V 1.0F ~ 2.2F 4.7F — 16V — 0.47F 2.2F ~ 4.7F X5R Y5V 0.47F ~ 1.0F — 0.22F 0.1F GRM40 — — 0.1F ~ 0.22F GRM42-6 GRM40 CAPACITOR TYPE AND SIZE 3-DIGIT CODE appears as necessary to indicate special thickness requirements. Please consult your local sales office for details. ––– TEMPERATURE CHARACTERISTICS X7R Y5V X7R 103 CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. K 050 A CAPACITANCE TOLERANCE X7R: K = ±10% M = ±20% Y5V: Z = +80 –20 % D VOLTAGE Identified by a three-digit number. For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 10 MARKING A = Unmarked PACKAGING Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch Code D L J K B C Q ■ Ceramic capacitor has no polarity and ensures long life time. Ideal replacement for tantalum capacitors. FEATURES ■ Large capacitance at low cost because of the use of base-metal materials ■ Terminations are made of metal highly resistant to migrations. ■ Heat generation is low at high frequency because of low dielectric loss. ■ Compared with aluminum electrolytic capacitors, capacitance can be lower to obtain the same smoothing performance. APPLICATIONS ■ DC-DC converter ■ Noise elimination for LCD bias circuit (Use for only alumina, paper or glass epoxy board.) DIMENSIONS: mm L W Type EIA Code L Length W Width T Thickness GRM220 0603 1.6 ± 0.1 0.8 ± 0.1 GRM230 1206 3.2 ± 0.15 1.6 ± 0.15 GRM235 1210 3.2 ± 0.3 2.5 ± 0.2 e g 0.2 ~ 0.5 0.5 min. 0.3 ~ 0.8 1.5 min. 0.3 min. 1.0 min. T e g Please refer to the Specifications table. e SPECIFICATIONS Type Thickness T (mm) Capacitance Range/DC Rated Voltage (V) 50 25 16 100 GRM220 0.8 ± 0.1 GRM230 GRM235 Capacitance Tolerance 10 — — — — 1F 1.15 ± 0.1 — — — 4.7F 10F 1.15 ± 0.1 1.35 ± 0.15 1.8 ± 0.2 — — 1F — — 4.7F — 6.8F 10F — 6.8F ~ 10F — — 22F — Z: +80 –20 % PART NUMBERING SYSTEM GRM235 CAPACITOR TYPE AND SIZE TEMPERATURE CHARACTERISTICS Y5V Y5V 685 CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. Z CAPACITANCE TOLERANCE Y5V: Z = +80–20% 016 A VOLTAGE Identified by a threedigit number. L MARKING A = Unmarked PACKAGING CODE Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Code D L J K B For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 11 CAPACITORS MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP – TANTALUM REPLACEMENT TYPE GRM SERIES MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP – 2000V SURGE SUPPRESSION GRM SERIES Murata Electronics announces a specialty 2000 volt surge suppression chip capacitor developed from Murata’s original multi-layer process technology and ceramic materials. E.I.A. 1808 surface mountable size makes this capacitor especially suited for applications where small size (compared to thru-hole capacitors) and reliable performance are a criteria. ■ ■ ■ ■ continuous, 2250 volt surge capability Long profile (4.6mm) reduces risk of high voltage spark over Small size: 4.6 x 2.0mm Tested to IEEE std. 802.3, 2,250VDC for 60 seconds Popular values: 15pF, COG, 27pF COG, 68pF COG, 150pF X7R, 220pF X7R, 470pF X7R FEATURES ■ High voltage rating: 1000VDC DIMENSIONS: mm GRM43 L W Length L 4.6 ± 0.3 Width W 2.0 ± 0.2 Insulation g min. 2.0 Termination e min. 0.25 T e g min. e Temperature Characteristics/Capacitance Value Rated Voltage Type 1000V GRM43 COG X7R 15pF ~ 150pF 150pF ~ 1000pF PART NUMBERING SYSTEM GRM43 CAPACITOR TYPE AND SIZE GRM – Nickel Barrier Plated Tin (Standard) COG TEMPERATURE CHARACTERISTICS Standard TC’s COG = 0 ± 30ppm X7R = ±15% 151 CAPACITANCE VALUE Identified by a three-digit code. First two digits represent significant figures. Last digit specifies the number of zeros to follow. 150 = 15pF 270 = 27pF 680 = 68pF 151 = 150pF K XKV CAPACITANCE TOLERANCE COG: J = ±5% K = ±10% X7R: K = ±10% M = ±20% A VOLTAGE Identified by a threedigit code. X = 2250VDC surge Some values cannot be taped. Consult your local MENA Sales Office for additional marking and packaging information. For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 12 L MARKING A = Unmarked PACKAGING Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch Code D L J K B C Q MONOLITHIC CERAMIC CAPACITORS CERAMIC CHIP – 500 VOLT & 1000 VOLT RATED COG & X7R TYPE GRM SERIES BENEFITS CAPACITORS These new surface mount components are designed to meet the growing demand for miniature, reliable chip capacitors, especially where high volume automation is required. Applications include solid state relays, telecom, instrumentation, modems, computer peripherals, and others. ■ Compatible with SMT equipment ■ Improves long term reliability ■ Suitable for harsh environments FEATURES ■ Standard E.I.A. sizes ■ Up to 2X rated voltage tested ■ –55°C to +125°C rated DIMENSIONS: mm L *EIA PREFERRED SIZE Size EIA Code L Length W Width T Thickness g (min.) Insulation e (min.) Termination GRM42-6 1206 3.2 ± 0.2 1.5 ± 0.2 1.25 max. 1.0 0.5 ± 0.25 GRM42-2 1210 3.2 ± 0.2 2.5 ± 0.2 1.5 max. 1.0 0.5 ± 0.25 GRM43 1808 4.6 ± 0.3 2.0 ± 0.2 2.0 max. 2.0 0.25 GRM43-2 1812 4.6 ± 0.3 3.2 ± 0.2 2.75 max. 2.0 0.25 GRM44-1 2220 5.6 ± 0.3 5.1 –0.5 +0.25 2.75 max. 2.0 0.25 W T e g min. e SPECIFICATIONS Temperature Characteristics/Capacitance Value COG X7R Type Rated Voltage GRM42-6 500V 5pF ~ 470pF GRM42-2 500V 100pF ~ 1000pF 1000pF ~ .015pF 500V 200pF ~ 1200pF 5000pF ~ .020pF 1000V 10pF ~ 270pF 800pF ~ 3900pF 500V 500pF ~ 2700pF .01F ~ .047F 1000V 100pF ~ 560pF 1000pF ~ .01F 500V 1000pF ~ 7500pF .020F ~ .12F 1000V 500pF ~ 1500pF GRM43 GRM43-2 GRM44-1 500pF ~ 6800pF .01F ~ .027F PART NUMBERING SYSTEM GRM42-2 CAPACITOR TYPE AND SIZE GRM-Nickel Barrier Plated Tin (Standard) GR-PalladiumSilver (Non-preferred) – TWO OR 3-DIGIT code appears as necessary to indicate special thickness requirements. Please consult your local MENA Sales Office for details. X7R TEMPERATURE CHARACTERISTICS Standard TC’s COG = 0±30ppm X7R = ±15% 103 K CAPACITANCE VALUE Identified by a three-digit code. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For fractional values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. 500 CAPACITANCE TOLERANCE COG: (10pF or less) C = ±.25pF D = ±.5pF (Over 10pF) J = ±5% K = ±10% X7R: K = ±10% A VOLTAGE Identified by a three-digit number. Others available upon request. (1,000 volts codes as 1KV) Some values cannot be taped. Consult your local MENA Sales Office for additional marking and packaging information. L MARKING A = Unmarked Reel Diameter/ Tape Material 7” Paper Tape 7” Plastic Tape 13” Paper Tape 13” Plastic Tape Bulk Bulk Cassette 7” Paper 2mm pitch PACKAGING Code D L J K B C Q For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 13 MONOLITHIC CERAMIC CAPACITORS CONFORMAL COATED RADIAL LEADED CAPACITORS RPE110 – RPE121/122 SERIES FEATURES ■ Wide capacitance, T.C., voltage and tolerance range ■ Industry standard sizes ■ Tape and reel available for auto insertion ■ Various lead spacing available ■ Marking standard or to customer specification ■ Epoxy coating meets UL94V-0 DIMENSIONS: mm RPE110 RPE131 RPE132 RPE121 RPE122 L L L H H H1 Size RPE110 L (max.) H (max.) H 1 (max.) T (max.) 3.8 3.0 — 2.5 5.0 3.5 5.5 3.15 5.0 4.5 6.3 3.15 L.S. d WVDC +0.6 2.54 –0.1 0.4 ± 0.05 50 ~ 200 0.5 ± 0.05 25 ~ 500 0.5 ± 0.05 50 ~ 500 H H1 RPE131RPE132 RPE121RPE122 +0.6 2.54 –0.1 / +0.6 5.08 –0.1 2.5/5.1 SPECIFICATIONS Type Rated Voltage COG 50V 1pF ~ 1300pF 220pF ~ .1F 1000pF ~ .1F .01F ~ .22F 100V 1pF ~ 820pF 220pF ~ .012F 1000pF ~ .015F .01F ~ .015F 200V 1pF ~ 160pF 220pF ~ 5600pF 1000pF ~ 3300pF N/A 50V 1pF ~ 4700pF 220pF ~ .27F 1000pF ~ .47F 1000pF ~ .68F 100V 1pF ~ 4300pF 220pF ~ .1F 1000pF ~ .15F 1000pF ~ .068F 200V 1pF ~ 1100pF 220pF ~ .047F 1000pF ~ .068F N/A 500V 10pF ~ 1000pF 220pF ~ .022F N/A N/A RPE110/131/132 X7R Z5U Y5V RPE121-122 PART NUMBERING SYSTEM RPE110 CAPACITOR TYPE AND SIZE XXX USED ONLY FOR tape and reel and other variations. *NOTE: T.C. Tolerance Capacitance (pF) 10 and over 4.0 ~ 9.9 2.1 ~ 3.9 .4 ~ 2.0 T.C. Tolerance (ppm) ± 30 (G) ± 60 (H) ±120 (J) ±250 (K) Refer to EIA RS-198 for limitations. X7R TEMPERATURE CHARACTERISTICS C0G = 0 ±30ppm* X7R = ±15% Z5U = +22, –56% Y5V = +22, –82% P2H = N150 ± 60ppm R2H = N220 ± 60ppm S2H = N330 ± 60ppm T2H = N470 ± 60ppm U2J = N750 ± 120ppm 103 K CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For the fractional values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. 050V CAPACITANCE TOLERANCE C0G: 5pF or less C = ±.25pF >5pF ≤ 10pF D = ±.5pF >10pF J = ±5% X7R: K = ±10% Z5U: M = ±20% Y5V: Z = +80, –20% For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 14 VOLTAGE Identified by a three digit number. 50 and 100V standard (200V and 500V on special request) MONOLITHIC CERAMIC CAPACITORS CONFORMAL COATED RADIAL LEADED CAPACITORS RPE123 -117 SERIES CAPACITORS FEATURES ■ Wide capacitance, T.C., voltage and tolerance range ■ Industry standard sizes ■ Tape and reel available for auto insertion ■ Various lead spacing available ■ Marking standard or to customer specification ■ Epoxy coating meets UL94V-0 DIMENSIONS: mm RPE113 RPE123 L Size L (max.) H (max.) H1 T (max.) L.S. d WVDC RPE123 7.5 5.0 7.0 3.15 +0.6 5.08 –0.1 0.5 ±0.05 50 ~ 200 RPE113 7.6 7.6 — 4.0 5.1 0.5 ±0.05 50 ~ 500 RPE114 10.0 10.0 — 4.0 5.0 0.5 ±0.05 50 ~ 500 RPE117 12.5 12.5 — 5.1 10.0 0.5 ±0.05 50 ~ 500 L H H H1 SPECIFICATIONS Type Rated Voltage COG X7R Z5U 50V 5100pF ~ .016F .33F ~ .47F .47F ~ 1.0F RPE123 RPE113 RPE114 RPE117 Y5V .68F ~ 1.0F 100V 4700pF ~ 6800F .12F ~ .15F N/A 200V 1200pF ~ 1600F .056F ~ .082F N/A .1F ~ .15F 50V .018F ~ .020F .56F ~ 1.0F 1.5F ~ 2.2F 1.0F ~ 1.5F .22F ~ .47F N/A 100V 7500pf ~ .016F .18F ~ .47F .22F ~ .68F 200V 1800pF ~ 3900pf .1F ~ .18F .10F ~ .15F 500V 1100pF ~ 6800pf .027F ~ .056F N/A 50V .022F ~ .039F 1.2F ~ 2.2F 3.3F 2.2F ~ 4.7F .47F ~ 1.0F N/A N/A 100V .018F ~ .033F .56F ~ 1.0F 1.0F 200V 4300pF ~ .010F .22F ~ .56F .22F ~ .47F 500V N/A .068F ~ .15F N/A N/A 50V .043F ~ .068F 2.7F ~ 3.3F 4.7F 6.8F N/A 100V .036F ~ .056F 1.2F ~ 2.2F 1.5F ~ 2.2F 1.5F ~ 3.3F 200V .011F ~ .030F .68F ~ 1.8F .68F ~ 1.5F N/A 500V N/A .18F ~ .47F N/A N/A PART NUMBERING SYSTEM RPE110 CAPACITOR TYPE AND SIZE XXX USED ONLY FOR tape and reel and other variations. *NOTE: T.C. Tolerance Capacitance (pF) 10 and over 4.0 ~ 9.9 2.1 ~ 3.9 .4 ~ 2.0 T.C. Tolerance (ppm) ± 30 (G) ± 60 (H) ±120 (J) ±250 (K) Refer to EIA RS-198 for limitations. X7R TEMPERATURE CHARACTERISTICS C0G = 0 ±30ppm* X7R = ±15% Z5U = +22, –56% Y5V = +22, –82% P2H = N150 ± 60ppm R2H = N220 ± 60ppm S2H = N330 ± 60ppm T2H = N470 ± 60ppm U2J = N750 ± 120ppm 103 K 050V CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For the fractional values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. CAPACITANCE TOLERANCE C0G: 5pF or less C = ±.25pF >5pF ≤ 10pF D = ±.5pF >10pF J = ±5% X7R: K = ±10% Z5U: M = ±20% Y5V: Z = +80, –20% VOLTAGE Identified by a three digit number. 50 and 100V standard (200V and 500V on special request) For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 15 MONOLITHIC CERAMIC CAPACITORS CONFORMAL COATED LEADED – TEMPERATURE COMPENSATING TYPE— RPEP2H-U2J SERIES FEATURES ■ Wide capacitance, T.C., voltage and tolerance range ■ Industry standard sizes ■ Tape and reel available for auto insertion ■ Various lead spacing available ■ Marking standard or to customer specification ■ Epoxy coating meets UL94V-0 DIMENSIONS: mm RPE110 RPE131/121 L RPE132/122 L H Size L (max.) H (max.) H 1 (max.) T (max.) L.S. d RPE110 3.8 3.0 — 2.5 +0.6 2.54 –0.1 0.4 ± 0.05 RPE121/122 5.0 4.5 6.3 3.15 L H H H1 H1 RPE131/132 5.0 3.5 5.5 3.15 +0.6 2.54 –0.1 / +0.6 5.08 –0.1 0.5 ± 0.05 SPECIFICATIONS Type Rated Voltage P2H R2H S2H T2H U2J 50V 1pF ~ 360pF 1pF ~ 560pF 1pF ~ 470pF 1pF ~ 390pF 1pF ~ 1800pF 100V 1pF ~ 360pF 1pF ~ 510pF 1pF ~ 430pF 1pF ~ 510pF 1pF ~ 960pF 50V 1pF ~ 2400pF 1pF ~ 2700pF 1pF ~ 3300pF 1pF ~ 1200pF 1pF ~ 7500pF 100V 1pF ~ 2200pF 1pF ~ 2400pF 1pF ~ 3000pF 1pF ~ 240pF 15pF ~ 4700pF RPE110 RPE121/122 PART NUMBERING SYSTEM RPE110 CAPACITOR TYPE AND SIZE XXX USED ONLY FOR tape and reel and other variations. NOTE: T.C. Tolerance Capacitance (pF) 10 and over 4.0 ~ 9.9 2.1 ~ 3.9 .4 ~ 2.0 T.C. Tolerance (ppm) ± 30 (G) ± 60 (H) ±120 (J) ±250 (K) Refer to EIA RS-198 for limitations. P2H TEMPERATURE CHARACTERISTICS P2H = N150 ± 60ppm R2H = N220 ± 60ppm S2H = N330 ± 60ppm T2H = N470 ± 60ppm U2J = N750 ± 120ppm 102 J CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For the fractional values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. 050V CAPACITANCE TOLERANCE 5pF or less C = ±.25pF >5pF ≤ 10pF D = ±.5pF >10pF J = ±5% For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 16 VOLTAGE Identified by a three digit number. 50 and 100V standard (200V and 500V on special request) MONOLITHIC CERAMIC CAPACITORS CONFORMAL COATED LEADED – ALUM. ELECTROLYTICS REPLACEMENT TYPE—RPE210-260 SERIES ■ Non-polarized ■ Increased high frequency performance reduces total capacitance requirements for equivalent impedance ■ Epoxy coating meets UL94V-0 CAPACITORS These new monolithic ceramic capacitors are specifically designed to replace aluminum electrolytic capacitors in a variety of applications. The high frequency performance of these devices makes them particularly suitable for use in the secondary suppression circuits in switching power supplies and other circuits with high frequency performance requirements. FEATURES ■ High long term reliability (10 to 20 years) DIMENSIONS: mm L d Style 1 W1 max. L T max. F d Lead Style WVDC RPE210* 10.0 7.5 4.0 5.0 ± 0.8 0.6 ± 0.05 1 25 ~ 100VDC RPE220* 12.0 10.0 4.0 5.0 ± 0.8 0.6 ± 0.05 2 25 ~ 100VDC RPE230 15.0 12.5 5.0 10.0 ± 0.8 0.6 +0.06 –0.05 1 25 ~ 100VDC RPE240 17.5 17.5 5.0 15.0 ± 0.8 0.8 +0.06 –0.05 1 25 ~ 100VDC RPE250 18.0 24.0 7.5 15.0 ± 0.8 0.8 +0.08 –0.05 2 25 ~ 75VDC RPE260 21.0 35.0 7.5 25.4 ± 1.5 0.8 +0.08 –0.05 2 25 ~ 75VDC W W1 W1 25.0 min. F L T W Type F Solder-coated CP wire 25.0 min. Style 2 *Available in Tape and Ammo. SPECIFICATIONS Rated Voltage and Capacitance Range Type 25V 50V 75V 100V RPE210 2.2, 3.3, 4.7F 1.5, 2.2, 3.3F — 1.0, 1.5F RPE220 6.8, 10F 4.7F — 2.2F RPE230 15F 6.8, 10F — 3.3, 4.7F RPE240 22, 33F 15, 22F — 6.8F RPE250 47F 33F 10F — RPE260 68, 100F 47, 68F 15, 22F — PART NUMBERING SYSTEM RPE230 TYPE Z5U TEMPERATURE CHARACTERISTICS 106 Z NOMINAL CAPACITANCE 050V CAPACITANCE TOLERANCE RATED VOLTAGE For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 17 MONOLITHIC CERAMIC CAPACITORS HIGH VOLTAGE CHIP–630VDC TO 3.15KVDC GHM1000/1500/2000 SERIES circuit such as snubber circuit for switching power supply, DC-DC converter, ballast (inverter fluorescent lamp). (R Characteristics) ■ Ideal for use as the ballast in liquid crystal back-lighting inverters. (SL Characteristics) FEATURES ■ A new multi-layer structure for small, surface-mountable devices capable of operating at high-voltage ■ Sn plated external electrodes allow mounting without silver compound solder. ■ The GHM1030 type and 1525/1530 type for flow and reflow soldering, and other types for reflow soldering APPLICATIONS ■ Ideal use on high-frequency pulse SPECIFICATIONS High-Voltage Type GHM1000/1500 Series Part Number GHM1030 e min. g min. GHM1038 W GHM1040 GHM1525왔 L T GHM1530왔 Type e g GHM1030 GHM1038 GHM1040 GHM1525 GHM1530 GHM1535 GHM1540 GHM1545 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 1.5 2.9 2.9 0.7 1.5 1.5 2.5 3.5 GHM1535왔 GHM1540왔 GHM1545 Capacitance Step R 630 Temp. Char./Cap. Value (pF)/DC Rated Voltage B SL 250 630 2k 3.15k 100 ~ 330 470 ~ 1000 — — — — — — — — — — — — — — — — E6 — — — — — 1000 ~ 6800 10000 15000 ~ 22000 33000 47000 68000 100000 — 150000 220000 — 330000 ~ 470000 — E6 — — — — — — — — 1000 ~ 10000 — 15000 ~ 22000 — 33000 ~ 47000 68000 — 100000 150000 220000 E12 — — — 120 ~ 220 — — — — — — — — — — — — — — — — 10 ~ 82 — 100 — — — — — — — — — — — — — Dimensions (mm) L W 3.2 ± 0.2 1.6 ± 0.2 4.5 ± 0.3 2.0 ± 0.2 4.5 ± 0.3 3.2 ± 0.3 2.0 ± 0.2 1.25 ± 0.2 3.2 ± 0.2 1.6 ± 0.2 3.2 ± 0.3 2.5 ± 0.2 4.5 ± 0.4 3.2 ± 0.3 5.7 ± 0.4 5.0 ± 0.4 T 1.0 +0 –0.3 1.25 +0 –0.3 2.0 ± 0.3 2.0 +0 –0.3 2.5 +0 –0.3 1.0 +0 –0.3 1.25 +0 –0.3 1.0 +0 –0.3 1.25 +0 –0.3 1.5 +0 –0.3 1.5 +0 –0.3 2.0 +0 –0.3 1.5 +0 –0.3 2.0 +0 –0.3 2.5 +0 –0.3 2.6 +0 –0.3 2.0 +0 –0.3 2.7 +0 –0.3 — Operating Temperature Range: –55 ~ +125°C AC250V Type GHM2000 Series Part Number L W T e min. g min. Temp. Char./Cap. Value (pF)/DC Rated Voltage B/AC250V (r.m.s.) Dimensions (mm) L W T e g GHM2143 10000 ~ 47000 5.7 ± 0.4 2.8 ± 0.3 2.0 ± 0.3 GHM2143 0.3 3.5 GHM2145 0.3 3.5 GHM2243 0.3 3.5 GHM2145 100000 5.7 ± 0.4 5.0 ± 0.4 2.0 ± 0.3 GHM2243 470 ~ 4700 Type Remarks Test Voltage: AC575V (r.m.s.), 60s 5.7 ± 0.4 2.8 ± 0.3 2.0 ± 0.3 Test Voltage: AC1500V (r.m.s.), 60s Capacitance Step E3 Operating Temperature Range: –25 ~ +85°C PART NUMBERING SYSTEM GHM1040 CAPACITOR TYPE AND SIZE 왔 TEMPERATURE CHARACTERISTICS Temperature Range SL= +20 to +85°C R = –55 to +125°C Maximum Capacitance Change over temperature range SL= +350 to –1000ppm/°C R = ±15% SL 121 CAPACITANCE VALUE Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. J 2K CAPACITANCE TOLERANCE D= ±0.5pF J = ±5% K = ±10% VOLTAGE 630 = 630VDC 2K = 2KVDC 3K = 3.15KVDC Available in European market only. For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 18 MONOLITHIC CERAMIC CAPACITORS SAFETY STANDARD RECOGNIZED GHM3000 SERIES CAPACITORS FEATURES ■ Safety standard recognized chip monolithic ceramic capacitor for AC line ■ Small size and large capacitance at high-voltage operating due to monolithic structure ■ Sn-plated terminals allow mounting without silver compound solder. ■ For reflow soldering ■ IEC 384-14 (2nd ed.) Class X1, Y2 (Adaptable to the circuit where basic insulation is required.) ■ 125°C guaranteed DIMENSIONS (mm) Safety Standard Recognized GHM3000 Series NEW e min. g min. W L T Part Number GHM3145X7R103K-GB GHM3145X7R153K-GB GHM3145X7R223K-GB GHM3145X7R333K-GB GHM3045X7R101K-GC GHM3045X7R151K-GC GHM3045X7R221K-GC GHM3045X7R331K-GC GHM3045X7R471K-GC GHM3045X7R681K-GC GHM3045X7R102K-GC GHM3045X7R152K-GC GHM3045X7R222K-GC GHM3045X7R332K-GC GHM3045X7R472K-GC L Length W Width 5.7 5.0 T Thickness 2.0 e g 0.3 4.0 2.7 5.7 5.0 2.0 0.3 4.0 Temperature Recognized Standard SPECIFICATIONS Part Number Capacitance (pF) GHM3145X7R103K-GB GHM3145X7R153K-GB GHM3145X7R223K-GB GHM3145X7R333K-GB GHM3045X7R101K-GC GHM3045X7R151K-GC GHM3045X7R221K-GC GHM3045X7R331K-GC GHM3045X7R471K-GC GHM3045X7R681K-GC GHM3045X7R102K-GC GHM3045X7R152K-GC GHM3045X7R222K-GC GHM3045X7R332K-GC GHM3045X7R472K-GC 10000 15000 22000 33000 100 150 220 330 470 680 1000 1500 2200 3300 4700 Capacitance Tolerance Rated Voltage Test Voltage Temperature Range ±10% AC 250 V(r.m.s.) DC 1075 V, 60 s –55 ~ +125°C � ±10% AC 250 V(r.m.s.) AC 1500 V(r.m.s.), 60 s –55 ~ +125°C X7R char. (±15%) IEC384-14 (2nd ed.) Range: –55 ~ +125°C EN132400 X7R char. (±15%) � Range: –55 ~ +125°C IEC384-14 (2nd ed.) EN132400 UL1414: Line By Pass PART NUMBERING SYSTEM GHM30 SERIES DIMENSIONS 45 X7R TEMPERATURE CHARACTERISTICS 101 K – CAPACITANCE The first two digits represent significant figures; the last digit represents the multiplier of 10 in pF. GC CAPACITANCE TOLERANCE TYPE DESIGNATION For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 19 MONOLITHIC CERAMIC CAPACITORS NICKEL BARRIERED TERMINATION TYPE GRM400 SERIES –LOW DISTORTION FEATURES APPLICATIONS ■ This series features a low dissipation factor and low distortion. ■ Low shock noise* without piezoelectric effects ■ This series is suited to flow and reflow soldering techniques without the need for silver. ■ This series is suitable for most automatic placement equipment. ■ Low distortion in general electronic equipment *Noise resulting from mechanical stress. DIMENSIONS: mm L Type (EIA Code) W T e g e Dimensions L W GRM420 (0603) 1.6 ± 0.1 0.8 ± 0.1 GRM425 (0805) 2.0 ± 0.1 1.25 ± 0.1 GRM430 (1206) 3.2 ± 0.15 T e Please refer to the Specifications table. 1.6 ± 0.15 g 0.2 ± 0.5 0.5 min. 0.2 ± 0.7 0.7 min. 0.3 ± 0.8 1.5 min. SPECIFICATIONS Type (EIA Code) Thickness T(mm) GRM420 (0603) Temp. Char. B R DC Rated Voltage (V) 50 16 0.8 ± 0.1 1000 ~ 3300 3900 ~ 10000 +0 0.7 –0.2 1000 ~ 10000 12000 ~ 15000 +0 0.1 –0.2 12000 ~ 15000 18000 ~ 33000 GRM425 (0805) +0 0.7 –0.2 18000 +0 1.0 –0.2 GRM430 (1206) — 22000 ~ 39000 +0 1.25 –0.2 47000 ~ 68000 — 82000 ~ 100000 K : ±10%, M : ±20% Capacitance Tolerance PART NUMBERING SYSTEM GRM425 TYPE TEMPERATURE CHARACTERISTICS B CAPACITANCE 103 K CAPACITANCE TOLERANCE 첸 50 RATED VOLTAGE PT MURATA’S CONTROL NO. Type Capacitance Temperature Reference Change Rate Range Temperature B within ±10% R within ±15% –25 to 85°C 20°C For more detailed information regarding this product line in North America, consult us. To receive additional information on Murata Products call 1-800 -831-9172. 20 PACKAGING Bulk : PB Tape : PT ■ Meets Mil-C-55681 with respect to: Shock, Vibration, Moisture Resistance, Solderability, Barometric Pressure, Temperature Cycling, Immersion and Salt Spray ■ Packaging options ■ Lot processing data available FEATURES Miniature size Very high Q at high frequencies High RF power capabilities Impervious to environmental conditions Low dissipation factors Excellent retrace capability (not applicable for X7R styles) High temperature stability Low noise ■ ■ ■ ■ ■ ■ ■ ■ 4X ACTUAL SIZE For filtering, coupling and impedance matching in most RF circuits, the MA Series chips and leaded devices offer outstanding performance and reliability with the greatest range of values and configurations. MA Series capacitors are also available in military grade CDR styles, consult factory. MA Series ceramic fixed capacitors are miniature, high performance precision components having extremely high Q and high power capabilities from low frequencies to gigahertz ranges. These “porcelain” multilayer capacitors are extremely stable with variations in temperature, voltage and frequency, and are capable of withstanding the environments encountered in space applications. MA Series capacitors are designed for miniature state-of-the-art circuit applications. They are small, easy to apply and have extreme reliability. Units are available in ultra-miniature case size 1 (.055” x .055” x .055”) or miniature case size 2 (.110” x .110” x .100”). Standard case size 1 units are available as chips. Standard case size 2 units are available as chips and also in a leaded configuration. Clean-room manufacturing technology assures product reliability and automated processing reduces costs and cycle time. Key stages of the operation are monitored and controlled with SPC techniques. Flexibility in design allows the production of nonstandard values while maintaining consistent quality objectives. Please contact the factory for availability of special configurations or high-reliability screening. CONFIGURATIONS AND DIMENSIONS – CASE SIZE 1 & 2 Type Dimensions: mm P90 ± 20 ppm/°C COG ± 30 ppm/°C X7R MA18 MA58 MA78 Configuration Y †1.65 max. Thickness, X7R MA68 Length W ± .25 T max. 1.8 max. 1.4 1.4 .130 max. 2.8 2.5 Y Termination +.25 – .1 † .25 ‡ .4 Palladium Silver, Ni Interface & Solder (Sn 62) Palladium Silver, Ni Interface & Solder (Sn 62) W L MA28 Band T MA88 ‡2.92 max. Thickness, X7R T.C. PART NUMBERING SYSTEM M CUBIC MONOLITHIC A A-STD SERIES 1/2 DIMENSIONAL AND T.C. CODE 1, 2: P90 5, 6: COG 7, 8: X7R 8 TERMINATION CODE: 8: Pd/Ag, Ni interface, Solder (Sn62) (Preferred) 2: MicroStrip 101 J CAPACITANCE CODE: Expressed in picofarads and identified by a three-digit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. A TOLERANCES: *B: ±0.1pF *C : ±0.25pF *D: ±0.5pF F : ±1% G: ±2% J : ±5% **K : ±10% **M: ±20% **Z: +80%, –20% N NO MARKING 7” Reel Plastic Tape *Available below 10pF only **X7R Styles For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 21 CAPACITORS MONOLITHIC CERAMIC CAPACITORS MINIATURE CERAMIC CAPACITORS MA SERIES MONOLITHIC CERAMIC CAPACITORS SOLDER COATED/HIGH FREQUENCY TYPE GRM700 SERIES FEATURES APPLICATIONS ■ Negligible inductance is achieved by its monolithic structure, so the series can be used at frequencies above 1GHz. ■ Nickel barriered terminations of GRM type improve solderability and decrease solder leaching. ■ This series is designed for both flow (except GRM710) and reflow soldering. ■ High-frequency and high-power circuits DIMENSIONS: mm L W T g Type L Length W Width T Thickness e g GRM706 +0.5 1.25 –0.3 +0.5 1.0 –0.3 1.2 max. 0.15 min. 0.3 min. GRM708 +0.5 2.0 –0.3 +0.5 1.25 –0.3 1.45 max. 0.2 min. 0.5 min. GRM710 +0.6 3.2 –0.4 +0.5 2.5 –0.3 1.9 max. 0.3 min. 0.5 min. e SPECIFICATIONS: pF Temperature Characteristics/DC Rated Voltage (V) Type 200 COG 100 50 GRM706 0.5 ~ 13 15 ~ 22 24 ~ 51 GRM708 0.5 ~ 51 56 ~ 91 100 ~ 160 GRM710 0.5 ~ 160 180 ~ 510 560 ~ 1000 PART NUMBERING SYSTEM GRM 708 CAPACITOR TYPE AND SIZE GRM = Nickel Barrier layer tin. TEMPERATURE CHARACTERISTICS Standard TC COG = 0 ± 30ppm/°C – 55°C to + 125°C COG 220 CAPACITANCE VALUE Expressed in picofarads and identified by a threedigit number. First two digits represent significant figures. Last digit specifies the number of zeros to follow. For values below 10pF, the letter “R” is used as the decimal point and the last digit becomes significant. K 100 CAPACITANCE TOLERANCE COG: (10pF or less) C = ±.25pF D = ±.5pF (Over 10pF) J = ±5% K = ±10% A VOLTAGE Identified by a three-digit number. For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 22 L MARKING A = No Marking PACKAGING B = Bulk L = 7” Reel MONOLITHIC CERAMIC CAPACITORS LOW ESL WIDE WIDTH TYPE LL SERIES CAPACITORS FEATURES ■ Low ESL, good for noise reduction for high frequency ■ Small, high cap. APPLICATIONS ■ High speed micro processor ■ High frequency digital equipment DIMENSIONS: mm L W Type L Length W Width T Thickness LL0306 0.8 ± 0.1 1.6 ± 0.1 0.6 ? LL0508 1.25 ± 0.1 2.0 ± 0.1 10 ? 3.2 ± 0.15 1.25 ? T 1.6 ± 0.15 LL0612 SPECIFICATIONS: pF Temperature Characteristics/DC Rated Voltage (V) Type 50 X7R 25 16 50 Z5U 25 16 50 Y5V 25 16 LL0306 2200 ~ 5600 6800 ~ 8200 10000 ~ 15000 10000 15000 ~ 22000 — 15000 22000 33000 ~ 68000 LL0508 4700 ~ 39000 27000 ~ 47000 33000 ~ 100000 33000 ~ 68000 47000 ~ 150000 — 68000 ~ 100000 100000 ~ 150000 150000 ~ 330000 LL0612 10000 ~ 120000 82000 ~ 150000 100000 ~ 330000 100000 ~ 220000 150000 ~ 470000 — 220000 ~ 330000 K: ±10% M: ±20% Cap. Tol. M: ±20% Z: +80 –20 % 470000 470000 ~ 1000000 Z: +80 –20 % PART NUMBERING SYSTEM LL0508 TYPE TEMPERATURE CHARACTERISTICS (Please refer to the table) X7R CAPACITANCE Code Cap. Change Temp. Range Reference Temp. X7R ±15% –55 ~ +125°C 25°C 103 K CAPACITANCE TOLERANCE 50 첸 RATED VOLTAGE PT MURATA’S CONTROL NO. PACKAGING Bulk: PB Tape: PT For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 23 MONOLITHIC CERAMIC CAPACITORS FOR WIRE-BONDING/DIE-BONDING MLC MICRO CHIP— GM250 SERIES FEATURES ■ Better microwave characteristics ■ Suitable for by-passing ■ High density mounting APPLICATIONS ■ Optical device for telecommunications ■ IC, IC package built-in ■ Measuring equipment DIMENSIONS: mm 0.5 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 SPECIFICATIONS Temperature Characteristics/DC Rated Voltage (V) Type X7R Y5V 16V GM250 1000, 1500 2200pF 4700, 10000pF Capacitance Tolerance K : ±10% M : ±20% Z : +80 –20 % PART NUMBERING SYSTEM GM250 TYPE TEMPERATURE CHARACTERISTICS Type Capacitance Change X7R CAPACITANCE 102 K CAPACITANCE TOLERANCE 첸 16 RATED VOLTAGE PM MURATA’S CONTROL NO. Temperature Reference Range Temperature X7R ±15% –55 to +125°C 25°C Y5V –82% –30 to 85°C 25°C For more detailed information regarding this product line, see Catalog No. C-22-C. To receive additional information on Murata Products call 1-800 -831-9172. 24 PACKAGING Bulk : (tray) : PM MONOLITHIC CERAMIC CAPACITORS CAPACITOR ARRAYS GNM SERIES CAPACITORS FEATURES ■ High density mounting due to mounting space saving ■ Mounting cost saving (one placement instead of four) ■ Four capacitors on one chip APPLICATIONS ■ ■ ■ ■ ■ Cellular phones, pagers Camcorders Personal computers Audio LCD DIMENSIONS: mm L Type L Length W Width T Thickness a b c GNM25-401 (0805) 2.0 ± 0.15 1.25 ± 0.15 1.0 max. 0.2 ± 0.1 0.5 ± 0.05 0.25 ± 0.05 GNM30-401 (1206) 3.2 ± 0.15 1.6 ± 0.15 0.8 ± 0.1 0.2 ± 0.1 0.8 ± 0.1 0.4 ± 0.05 W T a c b SPECIFICATIONS: pF Type Temperature Characteristics DC Rated Voltage (V) COG X7R Y5V 100 10 ~ 150 220 ~ 4700 680 ~ 4700 50 10 ~ 330 680 ~ 15000 22000 ~ 47000 25 — 18000 — GNM30-401 16 — 22000 ~ 39000 (C = 10pF) D: ±0.5pF (C > 10pF) J: ±5% K: ± 10% Capacitance Tolerance K: ±10% M: ±20% 68000 ~ 150000 Z: +80 –20 % PART NUMBERING SYSTEM GNM30-401 TYPE TEMPERATURE CHARACTERISTICS (Please refer to the table) COG CAPACITANCE Code Temp. Coeff. Temp. Range Reference Temp. COG 0 ± 30ppm/°C –55 ~ +125°C 25°C 101 J CAPACITANCE TOLERANCE 50 첸 RATED VOLTAGE PT MURATA’S CONTROL NO. PACKAGING Bulk: PB Tape: PT For more detailed information regarding this product line, contact us. To receive additional information on Murata Products call 1-800 -831-9172. 25
© Copyright 2026 Paperzz