Cubo
TECHNICAL FEATURES
The Cubo executive furniture provides a wide range of
basic lines and functional products. Lacquered finishes and
wooden sheets are combined to create a very attractive
contrast. The program includes 2 desk dimensions,with an
optional modesty panel, a return desk or a support pedestal.
The program also includes cabinets and meeting tables.
SIMPLE DESK
Board
Cable management
40 mm thick particle
with natural wooden board cover
optional for top access
Mobile pedestal
Optional modesty panel
19 mm thick lacquered particle board
Inner framework
40 x 20 x 2 mm steel tube
Fiber board folding
40 mm thick with natural wooden cover
3 drawers or
drawer + filing drawer
Plate
8 mm thick
DIMENSIONS
Width
200 / 180 cm
Depth
90 cm
Height
74 cm
200/180
90
74
Dimensions in centimeters
02 | Cubo TECHNICAL FEATURES | Forma 5
DESK WITH RETURN DESK
Board
40 mm thick particle covered
by natural wooden board
Cable management
optional for top access
Framework
steel tube interior
Pedestal
Leg panel
3 drawers
Drawer + filing drawer
Fiber board folding covered
by natural wooden board
DIMENSIONS
Width
200 / 180 cm
Depth
90 cm
Width (return desk)
60 cm
Depth (return desk)
190 cm
Height
74 cm
200/180
190
90
74
60
Dimensions in centimeters
Forma 5 | TECHNICAL FEATURES Cubo | 03
DESK WITH DOUBLE CREDENZA
Cable management
Optional by top access
Board
40 mm thick particle.
Covered by natural wooden board.
Pillar
Electrification folding
Support credenza
Optional modesty panel
19 mm thick lacquered particle board
Door
3 drawers or
drawer + filing drawer
Board folding
40 mm thick fiber.
Natural wooden board covered
Plumier
DIMENSIONS
Width (desk)
200 / 180 cm
Width (desk + double pedestal)
270 / 250 cm
Depth (desk)
90 cm
Depth (Cabinet-double pedestal)
70 cm
Height (desk / cabinet)
74 / 60 cm
270/250
200/180
70
90
74
60
Dimensions in centimeters
04 | Cubo TECHNICAL FEATURES | Forma 5
ELEMENTS DESCRIPTION
SIMPLE DESK
The series propose as main element the simple desk with 2 dimensions available: 180 and
200 cm. Both formed by top and 4 cm thick MDF board folding leg panel. The leg panels are
finished by metal plates.
TOP
4 cm thick particle boad covered by natural wooden board and wooden board edge. Varnished
through ultraviolet curing rollers. Its lower face is mechanised to fix the metal framework that
supports the team.
The tops have the possibility of cable management by top access system. They are delivered
packed in a box with its protections.
WALL
4 cm final thick fiber board folding framework. The board, as the top’s board, is covered by natural wooden board. Varnished through
ultraviolet curing rollers. This hiddes an inner metal framework that supports and gives rigidity to the group. Both leg panels are finished
by 0,8 cm thick plates. They are delivered packed in a box with its protections.
METAL FRAMEWORK
MODESTY PANEL
40 x 20 x 2 tube steel structure, completely hidden in the
interior of the leg panel and fixed to the back of the top, giving
the group an outstading rigidity.
Optional modesty panel fixed to the top by steel brackets,
hanging without touching the leg panels. Realised by 19 mm
thick particle board later lacquered.
FITTINGS
Included in each item.
ASSEMBLY
Detailed in the plans attached to each item.
DESK WITH RETURN DESK
The series offer the possibility of complete the simple desk with a return desk with similar
features. The return desk is composed by top and 4 cm thich wooded board leg. Finished by
plate in leg as the desk.
The following elements are added to the elements that form the desk:
RETURN DESK TOP
4 cm thick particle boad covered by natural wooden board and wooden board edge. Varnished
through ultraviolet curing rollers. Its lower face is mechanised to fix the metal framework that
supports the team. Only one dimension: 190 cm.
The tops have the possibility of cable management by top access system. They are delivered
packed in a box with its protections.
RETURN DESK WALL
METAL FRAMEWORK
4 cm final thick fiber board folding framework. The board, as
the top’s board, is covered by natural wooden board. Varnished
through ultraviolet curing rollers. This hiddes an inner metal
framework that supports and gives rigidity to the group. Both leg
panels are finished by 0,8 cm thick plates. They are delivered
packed in a box with its protections.
40 x 20 x 2 tube steel structure, completely hidden in the
interior of the leg panel and fixed to the back of the top, giving
the group an outstading rigidity.
Forma 5 | TECHNICAL FEATURES Cubo | 05
exterior por el lateral opuesto a su entrada.
ELEMENTS DESCRIPTION
DESK WITH DOUBLE CREDENZA
The series offers the possibility of support the desk on a credenza. For this configuration one
of the supports of the simple desk is replaced by a 2-section lacquered cabinet with wooden
board fronts. The support is realised by a MDF folding rectangular pillar with the same finish
as the top and the wall.
The following elements are added to the elements that form the simple desk (with the exception if the desk just need one panel leg):
DOUBLE CREDENZA
2 indivisible sections cabinet with contrast between lacquered framework and wooden board
fronts. The lacquered finishes are white and black. The finishes for the wooden board are oak,
ebony, walnut and wengue. The possibilities of the modules are 3 drawers and door, drawer
+ filing drawer and door.
• The cabinet has levellers to adjust the cabinet from inside.
• The top support in the credenza is made by a varnished wooden board pillar (oak, ebony,
walnut or wengue finishes will match the furniture colour).
• For the option with electrified top, the cable driving will be hidden in the interior of the
furniture and by the support pillar until the exterior by the otherside of the entrance.
06 | Cubo TECHNICAL FEATURES | Forma 5
PRODUCT ENVIRONMENTAL STATEMENT
Life Cycle Analysis
Program Cubo
RAW MATERIALS
Raw Material
Steel
Plastic
Wood
Kg
%
14,08 Kg
0,3 Kg
152,81 Kg
8,8%
0,2 %
91%
% Recycled materials= 68%
% Recyclable materials= 99,8%
Ecodesign
Results reached during the life cycle stages
MATERIALS
Wood
70% of the wood material is recycled, has PEFC/FSC and
complies within the E1 standard.
Paintings
Steel
100% recyclable with inks with no solvents.
15%-99% recycled material.
Podwer painting without COV emissions
Packings
Forma 5 | TECHNICAL FEATURES Cubo | 07
PRODUCTION
Raw materials use optimization
Podwer painting
Renewable energies use
Glue removal from the upholstery
Board, upholstery and steel tubes cut.
reducing the CO2 emissions. (Photovoltaic pannels)
Energy saving measures
in all production process
COV global emission reduction
of the production processes by 70%.
recovery of 93% of the non deposited painting
The facilities
have an internal sewage for liquid waste.
Green points
at the factory
100% waste recycling
at production process ans dangerous waste special treatment.
TRANSPORT
Cardboard use opmitization
Solid waste compacter
Cardboard and packing materials use reduction
Light volumes and weights
Flat packings and small bulks
to optimize the space.
Transport fleet renewal
of the packings
which reduces transport and emissions.
reducing by 28% the fuel consumption.
Suppliers area reduction
Local market power and less pollution at transport.
USE
Easy maintenance and cleaning
The highest quality
Forma 5 provides a 2 year guarantee
Useful life optimization
without solvents.
and up to 10 years for big projects.
for materials to provide a 10 year average life of the product.
of the product due to a standarized and modular design.
END LIFE
Easy unpacking
With no air or water pollution
Piece standarization
Returnable, recyclable and reusable packing
for the recyclability or compound reuse.
for the use.
Recycled materials used for products
(% recyclability):
Wood is 100% recyclable.
Steel is 100% recyclable.
08 | Cubo TECHNICAL FEATURES | Forma 5
while removing waste.
Product recyclability 99,8%
MAINTENANCE AND CLEANING GUIDE
WOOD PIECES
METAL PIECES
Rub the dirty spots with a wet cloth with PH neutral soap.
Rub the dirty spots with a wet cloth with PH neutral soap.
PLASTIC PIECES
Polished aluminium pieces can have their polish bak by covering
and rubbing them with a dry cottom cloth.
Rub the dirty spots with a wet cloth with PH neutral soap.
GLASS PIECES
Rub the dirty spots with a wet cloth with PH neutral soap.
Do not use abrasive products in any case.
RECYCLING
95% of the Cubo components are recyclable.
LEGAL TERMS
CERTIFICATES
The Cubo program has been designed and manufactured according to the current legal terms about office desks and storage elements:
UNE 527-1:2001:”Office furniture. Office desks.Part 1: Dimensions”
UNE 527-2:2003:”Office furniture. Officedesks.Part 2:Security mechanical requirements”
UNE527-3:2003:”Office furniture. Office desks.Part 3:Test methods to determine the stability and mechanical resistance of the structure”
Une-EN 14074: “Office furniture.Office desks and furniture. Tests methods to determine the resistance and durability of the mobileparts”
UNE-EN 14073-1:”Office furniture. Office desks and storage furniture.Part 1: Dimensions”
UNE-EN 14073-2:”Office furniture. Office desks and storage elements.Part 2:Security requirements”
UNE-EN 14073-3: “Office furniture. Office desks and storage elements.Part 3: Test methods to determine the stability and structural resistance”
Designed by the TANDEM COMPANY
Forma 5 | TECHNICAL FEATURES Cubo | 09