hfebir232-1km

HFEBIR232-1KM
HDMI Extender Over Fiber Optic Cable Up To .62 Miles (3,280 feet)
Model: HFEBIR232-1KM is an Optical HDMI Extender that overcomes the length restrictions of standard HDMI cables or
Cat5 HDMI extenders by using optical fiber to send high definition audio and video signals over long distances. This extender
also has built in RS232 for control and Bi-Directional IR.
Features:
>
>
>
>
>
>
>
>
>
Extends HDMI signal over fiber optical cable
Built in bi-directional RS232
Built in IR extender function, supports IR bi-directionally
Distance: Single mode up to 1KM (3,280’), multi mode up to 300M (985’)
Uses LC fiber optic connectors, fiber wavelength 1310nm/1550nm FP
Supports HDMI 1.3 1080p@60Hz, video bandwidth support 25-225Mhz
Supports 2 channel audio
HDCP and DVI Compliant
500’ and 1000’ pre made fiber cables available
Package Includes:
HFEBIR232-1KM Transmitter x 1 piece
HFEBIR232-1KM Receiver x 1 piece
Power adapter DC 5V 2Amp x 2 pieces
RS232 male to 3.5mm male cable x 1 piece
RS232 female to 3.5mm male cable x 1 piece
IR Emitter cable x 1 piece
IR Receiver cable x 1 piece
Instructions
Installation View:
[email protected] * 1-888-861-7351 * www.zuum.life
ZM063016
Connecting HFEBIR232
- Step 1: Make sure all devices are off
- Step 2: Connect HDMI cable from HDMI receiver to the TV
- Step 3: Connect HDMI cable from HDMI transmitter to the source
- Step 4: If using the IR cables make sure when using IR receiver that the switch is set to RX for receive. On the side you
use the IR blaster set the switch on the HDMI extender to TX for transmit.
- Step 5: If using the RS232 cables connect them as well to the 3.5mm port.
- Step 6: Connect a LC to LC fiber cable between the HDMI TX and RX. (Use LC-LC Simplex OM3 50/125) available
premade at ZUUM.
- Step 6: At this time plug in the power adapters to electrical outlets and plug into the HDMI TX and RX. Turn on TV and
source.
- Step 7: Note you may need to change audio mode in source to PCM or two channel stereo. At this time you should have
a picture.
LED Indication
Green:
Power ON/OFF
Blue ON: Linking
Blue OFF: Unlink
Specification:
Model:
Video Bandwidth
HFEBIR232-1KMTX
HFEBIR232-1KMRX
25 ~ 225 MHz
Resolution
Up to 1080p/60Hz
Audio Support
2 channel stereo
Video output/input connector
Transmission Interface
HDMI Type A 19 Pin x 1
Fiber optics connector: LC type x 1
RS-232 Connector
3.5mm Jack x 1
RS-232 Data Rate
Up to 115200 bps
IR Connector
IR Frequency
IR Switch
LED
Power Supply
Power Consumption
Temperature
Dimension - Inches
Weight - lbs.
3.5mm Jack x 1
20 ~ 60KHz
Slide Switch x 1
LED Blue x 1, Green x 1
DC 5V 2Amp
1A (Max)
Operation: 0 to 55°c, Storage: -20 to 85°c, Humidity: up to 95%
3.46(w) x 4.33(l) x 1.18(h)
.55
Do you Need Technical Support?
ZUUM is proud to offer free technical support to ensure your product is operating correctly.
If you are experiencing difficulties setting up this product, please call us for assistance 1-888-861-7351 or visit
www.zuum.life
Here for You 24/7
[email protected] * 1-888-861-7351 * www.zuum.life
ZM063016