FIRE DECK 6045
STONE HEARTH OVEN
Job Name
Model
WS-FD-6045
Item#
The Fire Deck 6045 oven features a door opening 34 inches
wide x 9.75 inches high, complemented by a glass heat shield
and stainless steel mantle. The cooking area is 42 inches wide x
31 inches deep, resulting in a 9-square-foot cooking surface. A
tensioned steel exoskeleton surrounding the hearth and dome
perimeter ensures structural integrity and longevity. Wrapped
in spun ceramic fiber insulation and requiring only a 1-inch
side clearance to combustibles, the monolithic 4-inch thick
cast-ceramic hearth and monolithic 4-inch thick dome rest
WS-FD-6045-RFG-R-IR configuration shown.
on a black painted steel stand. The oven body front is finished
with stainless steel; galvanized steel is used for the top, back
HEARTH CAPACITY
and sides. The oven arrives completely assembled, ETL Listed,
ready to install and is made in the USA. A set of optional rigging
8" pizzas:
16
10" pizzas:
10
12" pizzas:
6
16" pizzas:
4 Considered an operational challenge
casters is available to aid in the initial installation. Information
about custom finishes, tools and accessories can be found online
at: woodstone-corp.com.
Assuming 5-minute cook times, the approximate maximum
hourly production capacity can be calculated by multiplying
the above numbers by 12. Cook times will also vary depending on “style” of pizza. Note: The addition of an optional
decorative flame will decrease space and impact overall
cooking capacity.
FUEL CONFIGURATIONS
GAS-FIRED ONLY: Configured to burn either natural gas (NG) or
liquid propane (LP).*
 RADIANT FLAME + UNDERFLOOR IR (RFG-IR):
Heated by an adjustable radiant flame located on one side
of the cooking chamber, along with a thermostatically
GUIDE TO MODEL NUMBERS
controlled infrared burner which is mounted under the
WS-FD-6045-RFG-L-IR-W
X
WS-FD-6045-RFG-R-IR
X
X
WS-FD-6045-RFG-R-IR-W
X
X
WS-FD-6045-W-IR
X
WS-FD-6045-W
X
-DF
X
X
Liquid Propane
-DF
15,000 BTU/hr flame at rear of cooking chamber for show.
Natural Gas
X
Combination
X
 DECORATIVE FLAME (-DF): Provides an additional
Wood Required
X
must be specified at time of order.
Decorative Flame (-DF)
Left Side Radiant Flame
WS-FD-6045-RFG-L-IR
Right Side Radiant Flame
Underfloor IR Burner
oven deck to ensure high production capacity. Flame side
-NG
-LP
is assisted by the additional BTUs of an Underfloor IR burner.
Note: Option will reduce available hearth capacity.
 WOOD-FIRED (W): Wood-fired only.
 WOOD WITH GAS ASSIST (W-IR): This wood-fired model
-NG
-LP
Note: A wood fire is required with this configuration.
-NG
-LP
 COMBINATION (-W): Allows optional wood burning for
-NG
-LP
ovens with gas burner configurations.* Note: Adding wood to an
-NG
LP
oven with an RFG burner will reduce available hearth capacity.
X
*Gas type must be specified at time of order.
REVISED: SPRING 2017
ANSI Z83.11:2016 Ed.4
CSA 1.8:2016 Ed.4
ANSI / NSF STD 4
t. 360.650.1111
tf. 800.988.8103
f. 360.650.1166
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
[email protected]
woodstone-corp.com
An ongoing program of product
improvement may require us to change
specifications without notice.
7
FIRE DECK 6045
STONE HEARTH OVEN • WS-FD-6045
VERY IMPORTANT!!
This oven is available in a left or right side burner configuration. Gas connections will be on the side of the oven as the radiant flame.
Right side flame shown below. Electrical connections are always on the left.
PLAN VIEW
1"
30mm
A
Exhaust
B
Mantle
C
Flame Height
Control Knob
D
Digital
Controller
E
Forklift Here
G
G
4"
100mm
52 3/4"
1340mm
45 1/4"
1150mm
5 3/4"
150mm
7 1/2"
190mm
A
B
Electrical
Connection
(accessible
from inside or
outside)
F
59 3/4"
1520mm
37 1/2"
950mm
SIDE VIEW
FRONT VIEW
48"
1220mm
Service Panel
or Optional
Storage Box
11 1/2"
R 290mm
33 3/4"
860mm
9 3/4"
250mm
Gas
Connection
Must Be Left
Removable
for Service
7 3/4"
200mm
Cleaning
Position
Swing
Radius
A
A
3 3/4"
100mm
40 1/2"
1030mm
78 1/4"
1990mm
10 1/4"
260mm
AIR INTAKE:
Do Not
Facade or
Cover Over
B
AIR INTAKE
E
23 3/4"
600mm
2 1/4"
60mm
F
29 3/4"
760mm 3"
80mm
25 1/2"
650mm
G
E
E
14"
360mm
24 3/4"
630mm
10"
250mm
UTILITIES SPECIFICATIONS
E
34"
860mm
17 3/4"
13 1/4" 450mm
340mm
16 3/4"
430mm
43"
1090mm
VENTING INFORMATION
GAS
Gas-Fired Only and Combination
¾ inch gas inlet (FNPT)
160,000 BTU/hr - Natural Gas (NG)
OR
160,000 BTU/hr - Propane (LP)
BTU/hr Output Per Burner
Radiant Flame Burner
B
C
D
C
D
9 3/4"
4"
100mm 250mm
48 1/4"
1230mm
115,000 NG
110,000 LP
IR Burner
45,000 NG
50,000 LP
Decorative Flame Adds
15,000 NG
15,000 LP
ELECTRICAL
Gas-Fired Only and Combination
120 VAC, 1.1 A, 50/60 Hz
Connection is on the left as shown.
IMPORTANT: Models with -W in the
model number must be vented as a
solid fuel appliance.
The Fire Deck 6045 must be vented using a Listed
Type 1 exhaust hood, or a hood constructed and
installed in accordance with NFPA 96 and all relevant
local and national codes. The oven must be vented in
accordance with all relevant local and national codes,
and in a manner acceptable to the authority having
jurisdiction.
Ship Weight: 3,200 lbs / 1,451 kg
REVISED: SPRING 2017
8
ANSI Z83.11:2016 Ed.4
CSA 1.8:2016 Ed.4
ANSI / NSF STD 4
t. 360.650.1111
tf. 800.988.8103
f. 360.650.1166
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
[email protected]
woodstone-corp.com
An ongoing program of product
improvement may require us to change
specifications without notice.