How to Use Scotch® Wrinkle-Free Glue Stick for Scrapbooking
A wedding invitation can be incorporated into a scrapbooking design to recreate the theme of that special day. Scotch®
Wrinkle-Free Glue Stick is used to attach the layers of paper, the photo and the leaves. It allows for repositioning so you
can ensure everything is straight on the page.
1
Difficulty – Easy
Materials
•
•
•
•
•
•
•
•
•
•
Cream textured 12 x12 inch scrapbooking paper
1 sheet gold textured scrapbooking paper
Pieces of painted torn edged paper (can be cut from wedding envelopes or invitations)
1 wedding invitation
Cream lattice ribbon
Thin gold chain ribbon
Gold leaves
Scotch® Wrinkle-Free Glue Stick (for attaching scrapbooking paper)
Scotch® Precision Scissors (for cutting paper and ribbon)
Scotch® Quick-Dry Adhesive (for gluing ribbon)
Instructions
1. Using Scotch® Precision Scissors, cut a piece of the gold textured paper 12 inches long and 1 inch wider than
the width of the photo.
2. Using Scotch® Wrinkle-Free Glue Stick, attach the pieces of the painted edge paper to the wrong side of the
gold paper, extending 1/2 inch over the edge.
2
3. Using the Scotch® Precision Scissors, cut the wedding invitation so it is the same size as the photo.
4. Attach the photo and the invitation, evenly spaced between the top and bottom edges of the gold patterned paper
using the Scotch® Wrinkle-Free Glue Stick.
5. Cut a 12 inch piece of both the cream lattice ribbon and the gold chain ribbon. Feed the gold ribbon through the
center holes of the lattice ribbon.
6. Using Scotch® Quick-Dry Adhesive, apply small amounts of glue the wrong side of the ribbon and attach it 3
inches from the left edge of the page.
7. Using the Scotch® Wrinkle-Free Glue Stick, apply glue to the wrong side of the gold paper strip and attach it to
the page centered between the left edge of the ribbon and the right edge of the page.
3
8. Apply the Scotch® Wrinkle-Free Glue Stick to the back of each of the leaves and attach them in a scattered
pattern centered between the right edge of the ribbon and the left edge of the paper.
9. Using Scotch® Precision Scissors, cut four pieces of the gold chain ribbon the length of width of the photo and
invitation.
10. Using Scotch® Quick-Dry Adhesive, apply small amounts of glue to the top and bottom edge of the photo and
invitation and attach the ribbon pieces.
4