BOTTOM PAINT
BUYING GUIDE
June 2014
Compatibility Chart
Previous
i
AF 33
BIOTIN PLUS
BIOCOP
BIOCOP TF
CUKOTE
CUKOTE
BIOCIDE PLUS
ACT, ACT w/Irgarol**
Aquaguard
ISLANDS 77 PLUS
MISSION BAY
ECO KOTE
SHARKSKIN
MONTEREY
TALON
MISSION BAY CSF
SMART SOLUTION
Horizons*
TROPIKOTE
TROPIKOTE BIOCIDE PLUS
Fiberglass Bottomkote NT**
Ultra, Ultrakote**
Protector*
Hydracoat, SR, Eco*
Bottomkote Pro**
Trinidad (All)*
Ultima,
SR,
SSA,
Eco*
Micron: Extra, 66, CSC,
Unepoxy (All)*
CSC HS, CF, Optima** Vivid, Vivid Free*
Pacifica® Plus
Trilux 33, Aerosol**
g
lin
ou
tif
An
New
ISLANDS 44 PLUS
Fiberglass
Bottomkote Aqua**
Hard Modified Epoxy
SHARKSKIN
TROPIKOTE
TROPIKOTE BIOCIDE PLUS
TALON
Self-Polishing/Ablative
AF 33
CUKOTE
CUKOTE BIOCIDE PLUS
ISLANDS 77 PLUS
MISSION BAY
SMART SOLUTION
THE INDUSTRY’S
BEST WRITTEN
Amount of Paint
Needed per Coat
Boat Length
(Feet)
Per Coat
20-25
3 Quarts
25-30
1 Gallon
30-32
1 Gallon + 1 Quart
33-37
1 Gallon + 2 Quarts
38-40
1 Gallon + 3 Quarts
41-42
2 Gallons
43-44
2 Gallons + 1 Quart
45-46
2 Gallons + 2 Quarts
47-49
2 Gallons + 3 Quarts
50-52
3 Gallons
53-55
3 Gallons + 1 Quart
56-59
3 Gallons + 2 Quarts
GUARANTEE
Top Performing Dual-Biocide Antifouling
L IM
*
Self-Polishing Copolymer Antifouling
Biocop TF™
Cukote™
Advanced dual biocide PL3 technology
Maximum protection available for fresh,
brackish and saltwater
Multi-season protection
38.06% Cuprous Oxide
4.14% Zinc Omadine
Lloyd’s Registry certified
* Amounts are estimates and may vary by boat
and bottom paint applied. Please see product
technical data sheets for exact coverage.
Compare with: Micron 66**
Low-VOC Self-Polishing
ECO KOTE
MONTEREY
I TED
Semi-hard, self-polishing ablative finish
Multi-season protection
47.57% Cuprous Oxide
Lloyd’s Registry certified
Compare with: Micron CSC**, ACP 50*, ACP 60*
Black 1205-1
Black 3445
Dark Blue 3430
Red 3441
Shark White 3410
Brown 3432
Green 3433
Teal 3434
Blue 3442
Certified
Advanced Self-Polishing Biocide
BIOCOP TF
ISLANDS 77 PLUS
Certified
Dark Blue 1230-1
Red 1201-1
Light Blue 1202-1
Tin Based
ISLANDS 44 PLUS
BIOTIN PLUS
Gray 1231-1
Compatibility
Chart
Legend:
Compatibility
Chart
Legend:
= Lightly sand and apply paint
= Lightly sand and apply paint
= Heavily sand and apply paint
= Heavily sand and apply paint
= Lightly sand and apply 1277 Barrier
= Lightly
sand
andorapply
Coat
Primer
12831277
IslandBarrier
Prime before
* Products noted as such are registered
* Products noted as such are registered
Trademarks of, or sold by Pettit (KopCoat),
Trademarks of, or sold by Pettit (KopCoat),
and or RPM International, Inc.
and or RPM International, Inc.
** Products noted as such are registered
** Trademarks
Products noted
such
are registered
of, oras
sold
by Interlux,
and or
Trademarks
Akzo
Nobel. of, or sold by Interlux, and or
Akzo Nobel.
Coatapplying
Primer or
1283 Island Prime before
paint
applying paint
“We selected Sea Hawk bottom paint for all
our vessels for many reasons. Not only does
it have superior antifouling qualities, but
its moisture barrier primers and adhesion
properties are superior. On-time shipments
are critical to us. And Sea Hawk products are
always here when we need them.”
– Bob Weidhaas, COO, Egg Harbor Yachts
Green 1234-1
Teal 1235-1
Slime Reducing Additive for
Copper-Based Antifouling
Harder, self-polishing ablative finish
Exceptional value multi-season coating
33.6% Cuprous Oxide – highest grade
available
Consistent viscosity providing better flow
and rolling ability
Lloyd’s Registry certified
Biocop TF™ Pint
Boosts Sea Hawk copper-based
antifouling to add a more powerful
DUAL-BIOCIDE Protection
Compatible with AF-33, Cukote,
Sharkskin, Talon and Tropikote
Zinc Technology
Dual biocide PL3 release technology
NEW NAUTICAL COATINGS, INC.
14805 49th Street North • Clearwater, Florida 33762
800.528.0997 U.S.A. Only • 727.523.8053 International • Fax 727.523.7325
Email: [email protected]
Compare with: ACT**, Micron CSC**, Ultima SSA*
Certified
= Biocop TF Slime-Reducing
Additive Compatible
w w w. S e a H a w k P a i n t s . c o m
Red 3341
L IM
©2016 New Nautical Coatings, Inc. All rights reserved. SHP-168 01202016
AF-33, Biocop TF, Cukote, Mission Bay, Mission Bay CSF, Monterey, Sharkskin, SHAWKOCON, VMG, Smart Solution, Talon, Tropikote, Tuff Stuff and Tuff Stuff Low VOC are trademarks of New Nautical Coatings, Inc.
AF-33™
I TED
*Warranty details can be found online at www.SeaHawkPaints.com
Variance in the printing process can affect the
representations of our actual paint colors.
Black 3345
Dark Blue 3330
Blue 3342
Green 3343
BOTTOM PAINT
BUYING GUIDE
Hard Modified Epoxy Antifouling
Tropikote™
Smart Solution™
Hard, modified epoxy antifouling
Protection in extreme tropical conditions
75.8% Cuprous Oxide (Highest in the Industry)
Red 2141
Blue 2142
Dark Blue 2140
Green 2143
Certified
Black 4705
Dark Blue 4730
Bright Red 4701
Sharkskin™
Black 6145
Red 6141
Blue 6142
Value-priced single-season hard modified epoxy
33.6% Cuprous Oxide
Consistent viscosity, better flow & rollability
Black 6045
Dark Blue 6030
Blue 6042
Green 6043
Water-Based Antifouling
Water-based semi-hard ablative finish
Environmentally safe – low VOC’s
54.67% Cuprous Oxide – highest grade available
Dark Blue 5430
Bright Green 4703
Available in 2-gallon kit
or 1/2-gallon kit.
Grey 1284
White 4710
Black 5445
Highest build low VOC epoxy primer
Complies with strict VOC limits set
by the California Air Quality
Management Board
Low VOC’s (280 grams/liter)
1:1 two-part ratio for easy mixing
Compare with: Interprotect**,
Pettit Protect 4700*
Available in 1-gallon kit
Certified
Also available
in 4500 series
water-based
formula
Black 4005
Dark Blue 4030
Bright Red 4001
Grey 1286
White 1287
Premium Blister Protection with Microsheet Silicate Technology
and Low VOC Emissions During Application
Bright Blue 4002
Bright Green 4003
Off White 4010
“We build between 450 and 500 boats a year, ranging from
35 to 60 ft. Since we started shipping our boats with Sea Hawk
antifouling in 1998, the number of bottom paint complaints from
our dealers has essentially dropped to zero. That’s unheard of in
the boating business.”
– Ray Gilles, Director of Customer Service, Carver Yachts
Copper-Free Water-Based Antifouling
Water-based self-polishing ablative
High-performance eco-friendly antifoulant
Over 80% lower VOC’s than solvent-based
antifoulants
No barrier coat needed over
most antifouling paints
4.02% Zinc Omadine
Ideal for all types of vessels
Black 4505
1277 Bottom Paint Primer
Anti-corrosive bottom paint primer
Ideal for priming any unknown antifoulant
Improves adhesion
Indefinite overcoat window
Spot primer
Compare with: Primocon**, Tie Coat 6627*
SHAWKOCON™
Conversion/barrier/sealer coating over TBT
antifoulings or any unknown well-adhered
antifoulant paint and promotes adhesion of
a new antifouling paint
Excellent barrier coat to reduce pitting of
underwater metals from galvanic corrosion
on running gear, lower units of outboards,
keels, pontoons, and I/O’s
Prevents bleeding of color from underlying
antifouling paint
Compare with: Primocon**, Tie Coat 6627*
Blue 5442
Red 5441
Green 5443
Bright Blue 4502
Bright Green 4503
Bright White 4510
Fast & Hard Racing Finish
Colors Stay True
Compatible with VC17** and SR-21*
For use in fresh water only
Compare with VC17**, and SR-21*
Gun Metal Gray SH410
Red SH411
Jet Black SH415
Bronze SH416
Blue SH412
White 1285
Tuff Stuff™ Low VOC
Self-polishing ablative; no barrier coat
needed over most antifouling paint
Environmentally-friendly, non-metal biocide
Helps prevent electrolysis
3.8% Zinc Omadine
Lloyd’s Registry certified
Mission Bay CSF™
Monterey™
Compare with:
Hydrocoat*,
Neptune 5*,
Aqua**
Bright Blue 4702
VMG™
Compare with: Interprotect**,
Pettit Protect 4700*
Mission Bay™
Green 6143
Talon™
Red 6041
Light Grey 4731
Dark Blue 6140
Single Season Semi-Hard Hybrid Ablative Antifouling
Compare with:
Unepoxy*,
Fiberglass
Bottomkote*
Highest build epoxy primer
Sheet Silicate Technology
Low odor during application
All-in-one osmosis protection
1:1 two-part ratio for easy mixing
Premium Blister Protection with Microsheet Silicate Technology
High performance hard modified epoxy
45.2% Cuprous Oxide
Consistent viscosity providing better flow and
rolling ability
Compare with: Ultra**,
Professional Coatings*,
Unepoxy*, Z Spar
Protector*
Fresh Water Racing Finish
Tuff Stuff™
Metal-free self-polishing ablative antifoulant
Environmentally safe
The ECONEA trade name and
Compatible over most
logo are registered trademarks of
Janssen PMP, a division of Janssen
existing antifoulants
Pharmaceutica, NV, Beerse, Belgium
2.9% Econea
Compare with:
Lloyd’s Registry certified
Pacifica Plus*,
Ultima Eco*
Now Available in Pints for Outdrives
Compare with: Trinidad*, Ultra**
Black 2145
Primer Systems
Copper-Free Antifouling
Aluminum Boat Paint
Aluma Hawk™
Ideal for pontoon boats, jon boats and
house boats
Rust-inhibiting
Topcoat and/or primer on raw aluminum,
fiberglass & other substrates
Safe for fresh or saltwater submersion
Black AH7005
Aluminum Gray
AH7031
Jon Boat Green
AH7033
Specialty Products
Marine Paint Stripper 1280
Removes many types of paints and varnishes,
including copper-based
Excellent for removing bottom paint
Environmentally safe, biodegradable,
nonflammable, low odor, cleanup with water
No methylene chloride or other harsh solvents
Will not damage gel coat or fiberglass
Does not pit or corrode aluminum or other
metals
Safe on all wood surfaces
Barnacle Blocker
Self-cleaning anti-corrosive primer
Use on underwater metals
Excellent water barrier
Reduces galvanic corrosion
BOTTOM PAINT
BUYING GUIDE
June 2014
Compatibility Chart
Previous
i
g
lin
ou
tif
An
ISLANDS 44 PLUS
AF 33
BIOTIN PLUS
BIOCOP
BIOCOP TF
CUKOTE
CUKOTE
BIOCIDE PLUS
ACT, ACT w/Irgarol**
Aquaguard
ISLANDS 77 PLUS
MISSION BAY
ECO KOTE
SHARKSKIN
MONTEREY
TALON
MISSION BAY CSF
SMART SOLUTION
Horizons*
TROPIKOTE
TROPIKOTE BIOCIDE PLUS
Fiberglass Bottomkote NT**
New
Boat Length
(Feet)
Per Coat
20-25
3 Quarts
25-30
1 Gallon
Ultra, Ultrakote**
30-32
1 Gallon + 1 Quart
Protector*
Trinidad (All)*
33-37
1 Gallon + 2 Quarts
38-40
1 Gallon + 3 Quarts
41-42
2 Gallons
Hydracoat, SR, Eco*
Bottomkote Pro**
Micron: Extra, 66, CSC, Ultima, SR, SSA, Eco* Unepoxy (All)*
CSC HS, CF, Optima** Vivid, Vivid Free*
Pacifica® Plus
Trilux 33, Aerosol**
Fiberglass
Bottomkote Aqua**
Hard Modified Epoxy
SHARKSKIN
TROPIKOTE
TROPIKOTE BIOCIDE PLUS
TALON
Self-Polishing/Ablative
AF 33
CUKOTE
CUKOTE BIOCIDE PLUS
ISLANDS 77 PLUS
MISSION BAY
SMART SOLUTION
THE INDUSTRY’S
BEST WRITTEN
Amount of Paint
Needed per Coat
43-44
2 Gallons + 1 Quart
45-46
2 Gallons + 2 Quarts
47-49
2 Gallons + 3 Quarts
50-52
3 Gallons
53-55
3 Gallons + 1 Quart
56-59
3 Gallons + 2 Quarts
GUARANTEE
Top Performing Dual-Biocide Antifouling
L IM
*
Self-Polishing Copolymer Antifouling
Biocop TF™
Cukote™
Advanced dual biocide PL3 technology
Maximum protection available for fresh,
brackish and saltwater
Multi-season protection
38.06% Cuprous Oxide
4.14% Zinc Omadine
Lloyd’s Registry certified
* Amounts are estimates and may vary by boat
and bottom paint applied. Please see product
technical data sheets for exact coverage.
Compare with: Micron 66**
Low-VOC Self-Polishing
ECO KOTE
MONTEREY
I TED
Semi-hard, self-polishing ablative finish
Multi-season protection
47.57% Cuprous Oxide
Lloyd’s Registry certified
Compare with: Micron CSC**, ACP 50*, ACP 60*
Black 1205-1
Black 3445
Dark Blue 3430
Red 3441
Shark White 3410
Brown 3432
Green 3433
Teal 3434
Blue 3442
Certified
Advanced Self-Polishing Biocide
BIOCOP TF
ISLANDS 77 PLUS
Certified
Dark Blue 1230-1
Red 1201-1
Light Blue 1202-1
Tin Based
ISLANDS 44 PLUS
BIOTIN PLUS
Gray 1231-1
Compatibility
Chart
Legend:
Compatibility
Chart
Legend:
= Lightly sand and apply paint
= Lightly sand and apply paint
= Heavily sand and apply paint
= Heavily sand and apply paint
= Lightly sand and apply 1277 Barrier
= Lightly
sand
andorapply
Coat
Primer
12831277
IslandBarrier
Prime before
* Products noted as such are registered
* Products noted as such are registered
Trademarks of, or sold by Pettit (KopCoat),
Trademarks of, or sold by Pettit (KopCoat),
and or RPM International, Inc.
and or RPM International, Inc.
** Products noted as such are registered
** Trademarks
Products noted
such
are registered
of, oras
sold
by Interlux,
and or
Trademarks
Akzo
Nobel. of, or sold by Interlux, and or
Akzo Nobel.
Coatapplying
Primer or
1283 Island Prime before
paint
applying paint
“We selected Sea Hawk bottom paint for all
our vessels for many reasons. Not only does
it have superior antifouling qualities, but
its moisture barrier primers and adhesion
properties are superior. On-time shipments
are critical to us. And Sea Hawk products are
always here when we need them.”
– Bob Weidhaas, COO, Egg Harbor Yachts
Green 1234-1
Teal 1235-1
Slime Reducing Additive for
Copper-Based Antifouling
Harder, self-polishing ablative finish
Exceptional value multi-season coating
33.6% Cuprous Oxide – highest grade
available
Consistent viscosity providing better flow
and rolling ability
Lloyd’s Registry certified
Biocop TF™ Pint
Boosts Sea Hawk copper-based
antifouling to add a more powerful
DUAL-BIOCIDE Protection
Compatible with AF-33, Cukote,
Sharkskin, Talon and Tropikote
Zinc Technology
Dual biocide PL3 release technology
NEW NAUTICAL COATINGS, INC.
14805 49th Street North • Clearwater, Florida 33762
800.528.0997 U.S.A. Only • 727.523.8053 International • Fax 727.523.7325
Email: [email protected]
Compare with: ACT**, Micron CSC**, Ultima SSA*
Certified
= Biocop TF Slime-Reducing
Additive Compatible
w w w. S e a H a w k P a i n t s . c o m
Red 3341
L IM
©2016 New Nautical Coatings, Inc. All rights reserved. SHP-168 01202016
AF-33, Biocop TF, Cukote, Mission Bay, Mission Bay CSF, Monterey, Sharkskin, SHAWKOCON, VMG, Smart Solution, Talon, Tropikote, Tuff Stuff and Tuff Stuff Low VOC are trademarks of New Nautical Coatings, Inc.
AF-33™
I TED
*Warranty details can be found online at www.SeaHawkPaints.com
Variance in the printing process can affect the
representations of our actual paint colors.
Black 3345
Dark Blue 3330
Blue 3342
Green 3343