SensFloor® Sensor Mat „Care“
for private care – with radio bell alarm (SE2-E)
The intelligent floor sensor system for preventing escape in case of dementia or falls in the elderly
SensFloor mats are based on the SensFloor system and feature
proximity sensors. Therefore, they are detecting a person before
he puts any weight on the mat. They are able to send an alarm, as
soon as a person is sitting on the bed and has his feet over the
mat. Simultaneously, the alarm mat switches on an orientation light
and therefore is able to prevent the patient from falling down in the
dark.
The SensFloor system for private care with radio bell alarm
consists of the SensFloor mat with a power supply and a
transceiver, which is equipped with an additional radio extension,
suitable to all Eldat Easywave products. It is able to send an alarm
via a mobile radio bell, which is installed within hearing range of
the carer and simultaneously switches on the integrated orientation
light for 7 minutes. Using the alarm button on the transceiver, the
patient is also able to send an alarm and switch on the light. More
combinations are possible e.g. by using a radio plug, a wrist alarm,
a GSM dialer for sending an SMS, a hands-free telephone, and so
on. All delivered radio components are preconfigured for plug and
play!
The SensFloor mats are water-resistant sealed in PVC foils. The
mats have an easy-to-clean PVC surface suitable for use in
hospitals.
Proximity sensors mats – no pressure necessary
Hygienic, easy-to-clean PVC surface
Wireless data transmission to the receiver (SE2-E);
alarm is send to a mobile radio bell (range approx. 15 m in house)
Optional configurations and radio devices on request
Every receiver has an integrated orientation light, a button to deactivate
the system and an emergency call button
Every system is ready to use on delivery
SensFloor receiver SE2-E with Eldat radio bell.
SE2-E with integrated orientation light, button for
deactivating and an emergency call button.
The mobile sensor mats are suitable for using in
front of beds as well as for door control.
Individual, separate tiles on top are possible.
SensFloor mat with PVC-surface. Easy to
clean and qualified for hospitals.
SensFloor sensor mat set - private care with radio bell (SE2-E)
SensFloor mat with PVC-surface
Price
Sensor mat with heat-sealed PVC-surface
422.00 €
Power supply for the mat, DC 9V/0,8A, functional ground
30.00 €
Receiver SE2-E with radio adaption and power supply
398.00 €
Eldat radio bell with plug connector, configured
61.00 €
Total, net
911.00 €
Prices for optional configurations on request
Facts and Figures
SensFloor sensor mat – CARE
with PVC-surface
water-resistant, heat-sealed with sensor underlay
Size: 56 x 100cm²; thickness seam 3mm, thickness center 6mm; weight 3.0kg; self-test
capability; supply voltage: 9V, charging rate approx. 20mA; cable length: 1.8m;
radio frequency 868.0 MHz; coverage approx. 30m in buildings;
accreditation for hospitals, bacteriostatic, fungistatic, Protecsol® blooming
Desktop-power supply for the mat
with functional ground
9V/0.8A, DC-cable length: 1.8m; AC- cable length: 1.8m
SensFloor receiver SE2-E
with integrated radio upgrade
Radio frequency 868.0 MHz, voltage 9V-24V DC; integrated radio module;
LED 14 lm max.; speaker 0.3W
All prices excl. VAT, packaging, transporting, customs charges, if not mentioned
* errors and omissions excepted
Future-Shape GmbH • Altlaufstr. 34 • 85635 Höhenkirchen-Siegertsbrunn • Germany
Telefon +49 (0) 8102 89638 0 • FAX +49 (0) 8102 89638 99 • E-Mail: [email protected] • www.future-shape.com
02/2014