Short-Form Operating instructions
For detailled information see operating instructions
METTLER TOLEDO
AT balances
Switching the fully
automatic doorfunction on/off
AT201
Max 205 g d = 0.01 mg
x times
Pro
FACT
Cancel
0.1/0.01mg
Switching
the weight unit
82.64315 @
Switching
the readability
Setting the weighing
process adapter
Setting the vibration
adapter
(matching the
weighing type)
(matching the
environment conditions)
AT201
12.6433 @
Max 205 g d = 0.01 mg
x times
Max 205 g d = 0.01 mg
x times
Configuration
Menu
Menu
Select 1
Select 1
⇔
⇔
Configuration
Menu
Select 1
Set
Set
Set
METTLER TOLEDO
AT201
Max 205 g d = 0.01 mg
Pro
FACT
Cancel
0.1/0.01mg
⇔
Configuration
AT201
Pro
FACT
Cancel
0.1/0.01mg
Pro
FACT
Cancel
0.1/0.01mg
Max 205 g d = 0.01 mg
Cancel
0.1/0.01mg
Menu
Select 1
⇔
AT201
Pro
FACT
⇔
Configuration
Print
Select 2
On/Off
Set
AT201
Max 205 g d = 0.01 mg
Configuration
x times
Menu
Select 1
Configuration
x times
Menu
Max 205 g d = 0.01 mg
Pro
FACT
Configuration
Menu
Select 1
⇔
⇔
⇔
Set
AT201
Max 205 g d = 0.01 mg
Cancel
0.1/0.01mg
Select 1
82643.15 µ
AT201
Pro
FACT
Cancel
0.1/0.01mg
Set
Set
12.64327 @
Pro
FACT
Fine dispensing
Vibration-free
environment
Universal
setting
Normal conditions
Absolute weighing
Severe vibrations
Cancel
0.1/0.01mg
Configuration
Menu
METTLER TOLEDO
⇔
Select 1
AT201
Max 205 g d = 0.01 mg
Pro
FACT
Cancel
0.1/0.01mg
Set
Configuration
⇔
Select 2
On/Off
Menu
Select 1
Special
applications
⇔
Print
Set
Printing out weighing
result
82.64315 @
12.6433 @
AT201
Max 205 g d = 0.01 mg
Possible only on semimicrobalances and
DeltaRange® balances, and to
a limit value depending on the
model.
Max 205 g d = 0.01 mg
Cancel
0.1/0.01mg
Configuration
Configuration
Menu
Menu
Select 1
Select 1
⇔
METTLER TOLEDO
By changing the second
weighing unit, you can switch
between additional weight units
(for instance g ↔ oz).
AT201
⇔
12.6433 @
Pro
FACT
Cancel
0.1/0.01mg
Set
Set
Pro
FACT
Print
⇔
Select 2
On/Off
*P11780216*
Subject to technical changes
12.6433
© Mettler-Toledo GmbH 2001
12.6433 @
11780216 Printed in Switzerland 0102/7.12
Mettler-Toledo GmbH, Laboratory & Weighing Technologies, CH-8606 Greifensee, Switzerland,
Phone +41-1-944 22 11, Fax +41-1-944 30 60, Internet: http://www.mt.com
METTLER TOLEDO AT balances
Program overview
Weighing mode
press and hold key
Menu
Set reference
weight for %
Configuration register
1)
Operational
setting
Basic setting
Weight units
Interface
Return to
factory setting
Automatic stability
detection
Weight unit 1
Data
transmission mode
%
Set reference
1)
weight for piece
Stk
.
*
oz
*
Internal
adjustment
*
Data
transmission rate
ozt
Readability
tı
5)
2)
External
adjustment
3)
d 1 µ
d 0.1 µ
d 0.5 µ
d 0.2 µ
Readability
semimicro range
Set weighing
process adapter
*
Weight unit 2
*
4)
5)
*
Parity
oz
ozt
df0.1 µ
df0.05µ
*
df0.01µ
*
*
tı
df0.02µ
GN
Set vibration
adapter
Autozero
Transmission
protocol
dwt
AZ
Status indicators
*
*
proFACT (adjustment and
linearization)
*
Fully automatic
door function
*
CALIN
End-of-line
mode
Beeper setting
*
*
*
Menu
Menu
Configuration register
Selection of the menu
Selection of the menu options
Configuration
1) Appears only if weight unit 2 is set in the configuration register to percent
(%) or piece (Stk or PCS ).
Selection of the
configuration register
Selection of the sectors
Selection of the parameters
2) Appears only if the internal adjustment (Auto Off ) is set in the configuration
register.
Select 1
Selection of the settings
Select 1
Cancel
Cancellation of the changes and retourn
to the weighing mode
Select 2
Selection of the settings
4) Appears only with semimicro and DeltaRange® balances.
Cancellation of the changes and
retourn to the weighing mode
5) The following appears with the AT20:
Cancel
Set
Set
Storage of the current menu
and return to the weighing mode
Switching off the balance by
pressing key upward
*
3) Appears only if the external adjustment (USEr ) is set in the configuration
register.
d = 0.01 mg*, 0.02 mg, 0.05 mg, 0.1 mg /dF = 2 µg*, 5 µg, 10 µg
The following appears with the AT460 DeltaRange®:
Set
Storage of the current menu
and return to the weighing mode
d = 1 mg*, 2 mg, 5 mg, 10 mg / dF = 0.1 mg*, 0.2 mg, 0.5 mg, 1 mg
* Factory setting