FlexAray
SEMI-PRECIOUS
®
QUARTZ
Flexible Linear
AMBER
Semi-Precious
3.0 Watts per foot, 36 LEDs per foot
Quartz Amber
LED on center: 0.33 Inches / 8.4 mm
Lumen Output: 79.16 lm/ft
Height: 0.088 Inches / 2.2 mm
Lumens per Watt: 26.39 lm/W
Length between cuttable points:
1.97 Inches / 50 mm
A590 - 590 Nanometers
Indoor / Outdoor rated
Width: 0.31
Inches / 8
mm
Cuttable every 1.97 inches
86 CRI with >90 available upon request
The FlexAray® Quartz Collection, Amber Series LED tapelight produces a peak spectral output above
560 nm which falls in the optimal wavelength range of sea turtle friendly lighting; therefore, the
FlexAray 3.0w Amber LED tape light meets the criteria for Wildlife Lighting when installed in a well
shielded location. The Amber LED tape light is recommended for use in areas where artificial lighting
is needed adjacent to ecologically sensitive areas, sea turtles nesting beaches, migratory corridors,
and Dark Sky Friendly communities. The FlexAray ® Quartz 3.0w Amber LED tape light must be
installed in a shielded location and directing the light away from the beach. (Certification #2015-031)
The Wildlife Lighting Program was developed by the Department of the Interior’s U.S. Fish and
Wildlife Service and the Florida Fish and Wildlife Conservation Commission to address light
pollution issues in ecologically sensitive areas while ensuring human safety and security.
ORDER CODING:
Category
Wattage
Color Temp
FAT24
3.0
A590
Certification Number
#2105-031
IP Rating
Product
QTZ
20 - Dry
67 - Wet
68 - Waterproof
0eL retains the right to modify the design of our products at any time as part of the company’s continual product improvement program
By 0energyLIGHTING, Inc.
855.955.1055 | 1110 Sligh Blvd., Orlando, FL 32806
Example:
FAT24-3.0-A590-20
Proudly made in Orlando, FL
by 0energyLIGHTING, Inc.
Project:
Designer:
Fixture:
REV: 160815:0218
FlexAray
SEMI-PRECIOUS
®
Flexible Linear
QUARTZ
AMBER
SPECIFICATIONS:
Semi-Precious
Quartz Amber
24 Volt
3.0 Watts / Linear Foot
125 mA / Foot
IP20/IP67/IP68
Triac / 0-10 Volt / DMX /
Lutron A-Series 1% dimming LED drivers
-40º C to 70º C
A590
A590K: 79.16 lm/ft
IP20: +/- 100K IP67-68: +/- 250K
160º
50,000 Hours
Every 1.97” (50 mm)
74-86 *Greater than 90 availble upon request
A590K: 26.39 lm/W
Yes
32’ 9.7” (10 Meters)
Operating Voltage
Power Consumption
Milliamperes
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI
Lumens per Watt
Constant Voltage
Max Length Before Additional Power is Needed
3 years from manufacturing date
Warranty
DIMENSIONS:
Width
Length
Height
Width
Length
Height
IP20
IP67 IP68
0.31” / 8 mm
Up to 32’ 9.7” ~2 inch sections
0.088” / 2.2 mm
0.41” / 10.4 mm
Up to 32’ 9.7” ~2 inch sections
0.18” / 4.5 mm
0eL retains the right to modify the design of our products at any time as part of the company’s continual product improvement program
By 0energyLIGHTING, Inc.
855.955.1055 | 1110 Sligh Blvd., Orlando, FL 32806
Proudly made in Orlando, FL
by 0energyLIGHTING, Inc.
Project:
Designer:
Fixture:
REV: 160815:0218