TDS No. 320
Date: DEC 2011
Seal‘n’Peel
442
PRODUCT INFORMATION
PRODUCT
Seal ‘n’ Peel 442
DESCRIPTION
A heavy duty peeelable coating for extreme industrial appl
ppllica
icatio
t ns
COLOUR
Aluminium
m gr
grey
ey.
FINISH
Low shheen, stippled
USES
Wheere a comp
omplet
letee envelope type coating is required for long term and/or external storage and can easily be peeled awa
w y ifif and
a when requ
equire
ired. Are
Areas
as of
com
mmon us
usee are
are the protection, transport and storage (”mothballing”) of military equipment, mining equipment, heav
eavyy industrial
i
machinery, castin
ti gs,
gs
moulds
mou
d , tung
tungste
st n carbide tooling, diamond drills, architectural brass, copper and aluminium. Also provides excellent
nt pro
pr tection for marble and sawn stone
etc. Seal
etc
Seal ‘n
‘n’’ Peel
P 442 is suitable for extreme environmental atmospheres and will peel freely aſter many years of ext
extern
ernal exposure.
FEATURES
• High impact resistance.
• Long-term weatherability.
• Excellent chemical resistance.
• Can webb over gaps.
• Fast drying for reduced dow
wn-time.
• The original “Liquid Envelope”™ - foor most
most mo
mothb
thball
alling situations.
PERFORMANCE
WEATHERING: Resistant to extreme weather condditions.
CHEMICAL RESISTANCE: Good for most common chemicals.
ABRASION RESISTANCE: Excellent resistance to abrasion.
WATER: Excellent resistance to fresh and salt water.
TEMPERATURE: Minimum 0ºc maximum 80ºc.
TEM
FLEXIB
FLE
XIBILI
ILITY
T : Excellent long term exibility.
TECHNICAL
NUMBER OF COMPONENTS: Sing
ingle
l pac
le
pack.
k
k.
SOLIDS CONTENT: 32% volumetric solids.
RECOMMENDED COVERAGE PER
E COAT: .644m² per litre @ 500 microons DFT
DF .
RECOMMENDED FILM BUILD
D: 500 microns
ns DFT - dep
d ending on service
ce lif
lifee required.
TOUCH DRY: To touch in 5 minu
n tes an
andd to be hand
handled
l in approx 1 hour
ur..
RECOAT: 5 minutes.
FULL CURE: Cures over seve
veral
ral da
days,
ys, bu
butt is
is serv
service
c able approx. 2 hou
ours
rs aſter application:
APPLICATION METHOD: Spr
pray
ay is pre
preferrabl
able.
THINNING: Use Seal’n’Peell Th
Thinn
inners
e 5.
5
SHELF LIFE: 12 months
t inn un
unope
opened
n containers when storred bel
below
ow 30ºc.
HANDLING: Highly amm
ammabl
able.
e Ref
R er current MSDS.
PACKAGING: Available
le in 4 and 20 litre containers.
CLEAN UP: Clean all eq
equip
uipmen
ment with Seal’n’Peel Thinnners 5.
NUMBER OF CO
COATS
ATS:: Min
Minimu
imum
m of 2 - recommenddedd DFT mu
m st be achieved.
QAF-034 Version 1
Page 1
Seal‘n’Peel
442
APPLICATION
DATA
Seal‘n’Peel
442
APPLICATION DATA
SURFACE
PREPARATION
SURFACE
PREPARATION
MIXING
MIXING
THINNING
THINNING
APPLICATION
Surfaces must be clea
c an, dry an
andd free
f e fr
f om dus
dust,
t, dir
dirt,
t gre
grease
se,, oil,
o wax and silicone.
Surfaces must be clea
c an, dry an
andd free
f e fr
f om dus
dust,
t, dir
dirt,
t gre
grease
se,, oil,
o wax and silicone.
Stir thorouug
ughly. Best results will be achieved using a power stirrer. Seal ‘n’ Peel 442
42 is
i th
thixo
i tropic so maay requ
require longer stir
tirrin
ringg in cold
old w
weeath
ather,
er,r iff st
s ore
o d
for a longg time or stored in cold conditions. Smooth consistency is normal.
Stir thorouug
ughly. Best results will be achieved using a power stirrer. Seal ‘n’ Peel 442
42 is
i th
thixo
i tropic so maay requ
require longer stir
tirrin
ringg in cold
old w
weeath
ather,
er,r iff st
s ore
o d
for a longg time or stored in cold conditions. Smooth consistency is normal.
Not
ot no
n rma
rmally
lly recom
commen
mended
ded. Use straight from the can. Any thinning for workability should be done with Seal’n’Pe
Peel
el Thi
Thinne
nners
ers 5.
Not
ot no
n rma
rmally
lly recom
commen
mended
ded. Use straight from the can. Any thinning for workability should be done with Seal’n’Pe
Peel
el Thi
Thinne
nners
ers 5.
EQUIPMENT
APPLICATION
EQUIPMENT
FLUID NOZZLE
PRESSURE
TO THE GUN
FLUID
NOZZLE
POT PRESSURE
PRESSURE
TO THE GUN
PUMPPRESSURE
RATIO
POT
CONVENTIONAL
SPRAY
CONVENTIONAL
2.0-2.5mm
SPRAY
PRESSURE
POT SPRAY
PRESSURE
2.0-2.
5mm
POT SPRAY
AIRLESS
SPRAY
AIRLESS
17-23 thou
SPRAY
30-50 psi
2.0-2.5mm
30-50 5mm
psi
2.0-2.
17-23 thou
30-50 psi
30-50 psi
1000-1500
PRESSURE TO AIR CAP
SAFETY
PRECAUTIONS
PRECAUTIONS
30·50
psimm
2.0
-2.5
30-50 psi
1.5-2.0
mm
30·50 psi
30·50 psi
30-50
psi
30·50 psi
1000-1500
16-20:1
PRESSURE
TO AIR CAP
PUMP
PRESSURE
SAFETY
HVLP
PRESSURE POT
HVLP
1.5-2.0 mmPOT
PRESSURE
16-20:1
30-50 psi
PRESSURE
PUMP RATIO
HVLP
CONVENTIONAL
HVLP
2.0 -2.5 mm
CONVENTIONAL
10 psi
10 psi
10 psi
10 psi
METHOD 
Applyy a wet
App
e eve
evenn coat
coat,, usin
usi g para
ralle
llell pass
passes
es ove
ov rla
lappi
pp ng by approx. 50%. Cr
Cross coats also enssure an even nal lm thickness. Seecon
condd and sub
s sequen
entt
METHOD 
coats
coa
ts can be ap
appliedd ass soo
soonn as
as the
the rst
rst coa
coatt is touch dry. Care should
ld be ta
taken to make certai
tainn the
th recommended lm build is achi
h eve
eved, as dettai
ailed
Applyy a wet
App
e eve
evenn coat
coat,, usin
usi g para
ralle
llell pass
passes
es ove
ov rla
lappi
pp ng by approx. 50%. Cr
Cross coats also enssure an even nal lm thickness. Seecon
condd and sub
s sequen
entt
overle
ove
rleaf,
a to ensure peelabi
abilit
ityy when
when re
requi
qu red an
a d to provide optim
mum
m pro
protec
te tion.
coats
coa
ts can be ap
appliedd ass soo
soonn as
as the
the rst
rst coa
coatt is touch dry. Care should
ld be ta
taken to make certai
tainn the
th recommended lm build is achi
h eve
eved, as dettai
ailed
REMO
EMOVAL overle
ove
rleaf,
a to ensure peelabi
abilit
ityy when
when re
requi
qu red an
a d to provide optim
mum
m pro
protec
te tion.
Scoree aro
around
u all edges with a dul
dulll blad
blade.
e Use
U caution not to damag
agee the
the sur
su face being prottect
cted.
ed. Re
Remove the lm by star
arti
ting from an ed
edge,
ge, pe
peeli
peeli
eling away.
REMO
EMOVAL Please dispo
spose
se of was
w te tho
though
ughtfu
tfully
lly.
Scoree aro
around
u all edges with a dul
dulll blad
blade.
e Use
U caution not to damag
agee the
the sur
su face being prottect
cted.
ed. Re
Remove the lm by star
arti
ting from an ed
edge,
ge, pe
peeli
peeli
eling away.
Please dispo
spose
se of was
w te tho
though
ughtfu
tfully
lly.
Contents are extremelyy am
 mmab
mable
le. Ke
Keep
ep awa
awayy from
from so
sourc
urces
es of ign
igniti
ition
on e.g
e.g. naked
ake
k d am
ame,
e, rad
radiat
iat
ator
ors et
etc. Application equipment must not spark. Keep
contents sealed and away from children. Av
A oid breathingg vapors dur
d ring
n mi
m xin
xingg and
and use. Wear protective clothing including safety goggles, gloves and
Contents are extremelyy am
 mmab
mable
le. Ke
Keep
ep awa
awayy from
from so
sourc
urces
es of ign
igniti
ition
on e.g
e.g. naked
ake
k d am
ame,
e, rad
radiat
iat
ator
ors et
etc. Application equipment must not spark. Keep
respirator. If swallowed call a doctor or Poisons Information Centre. When spr
spraying in conned areas assist ventilation to provide fresh air.
contents sealed and away from children. Av
A oid breathingg vapors dur
d ring
n mi
m xin
xingg and
and use. Wear protective clothing including safety goggles, gloves and
For more detailed safety precautions consult the current Material Safety
ety Da
Data Sheet.
respirator. If swallowed call a doctor or Poisons Information Centre. When spr
spraying in conned areas assist ventilation to provide fresh air.
For more detailed safety precautions consult the current Material Safety
ety Da
Data Sheet.
•
•
•
•
•
•
Do not apply in direcct sun
un lig
light
ht or hot dr
dryin
yingg winds
Seal ‘n’ Peel 442 contaiins sol
solven
vents
ts tha
h t may
a damage certain sur
surfac
faces e.g. plastics.
Do not apply in direcct sun
un lig
light
ht or hot dr
dryin
yingg winds
The user must rst sati
t sfy th
thems
emselv
el es of product suitabilityy by
by appl
app ying a small am
moun
ount to ann inco
n nspicuous test area.
Seal ‘n’ Peel 442 contaiins sol
solven
vents
ts tha
h t may
a damage certain sur
surfac
faces e.g. plastics.
The user must rst sati
t sfy th
thems
emselv
el es of product suitabilityy by
by appl
app ying a small am
moun
ount to ann inco
n nspicuous test area.
The information contained herein is based on tests believed to be accurate and reliable however any data, advice, recommendation, information, assistance or service provided by Dominion Plastic Industries in
relation to goods manufactured by them or their use and application is given in good faith and is believed by Dominion Plastic Industries to be appropriate and reliable. However, any advice, recommendation,
The information contained herein is based on tests believed to be accurate and reliable however any data, advice, recommendation, information, assistance or service provided by Dominion Plastic Industries in
information, assistance or service provided by Dominion Plastic Industries is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right
relation to goods manufactured by them or their use and application is given in good faith and is believed by Dominion Plastic Industries to be appropriate and reliable. However, any advice, recommendation,
entitlements and remedies conferred upon any person or the liabilities imposed upon Dominion Plastic Industries by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or
information, assistance or service provided by Dominion Plastic Industries is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right
prohibiting such exclusion limitation or modication. Coating systems can be expected to perform as indicated on this data sheet so long as application and procedures of the individual products are followed as
entitlements and remedies conferred upon any person or the liabilities imposed upon Dominion Plastic Industries by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or
recommended on the appropriate product data sheet
prohibiting such exclusion limitation or modication. Coating systems can be expected to perform as indicated on this data sheet so long as application and procedures of the individual products are followed as
recommended on the appropriate product data sheet
Dominion Plastic Industries a division of A & I Coatings
7 Lackey Road, PO Box 820, Moss Vale NSW 2577.
DOMINION PLASTIC INDUSTRIES PTY LTD
16-20 MCGILL STREET
SHEPPARTON, VICTORIA 3630
PO BOX 7358 SHEPPARTON, VICTORIA 3632
Page 2
Phone: 1800 819 585 Fax: 02 4869
3031
PHONE 03 5821 1477
FAX 03 5821 1755
EMAIL [email protected]
WEB DOMINIONPLAS.COM.AU
DOMINION PLASTIC INDUSTRIES PTY LTD
16-20 MCGILL STREET
SHEPPARTON,
VICTORIA
3630
PO
BOX
7358
SHEPPARTON,
VICTORIA
3632
Email: [email protected] Web: www.aicoatings.com
QAF-034 Version 1 Page 2
PHONE
03 5821 1477
FAX
03 5821 1755
EMAIL
[email protected]
WEB
DOMINIONPLAS.COM.AU