Technical Data Sheet
PR6000™
Precured Resin Coated Sand
DESCRIPTION
PR6000TM proppants are precured resin coated sand available in 20/40 and 30/50 mesh sizes. Reddish-brown in color,
PR6000 proppants utilize a proven resin technology applied to a special graded high quality fracturing sand. The result of
this process is an economical intermediate strength proppant.
TYPICAL APPLICATIONS
Fracture treatments:
•
•
At closure stress up to 55 MPa [8,000 psi]
At bottom-hole static temperatures from 21 - 191°C [70 - 375°F]
TECHNICAL ADVANTAGES AND BENEFITS
•
•
Resin capsule minimizes fines migration
Proven, completely cured resin
•
•
Frac fluid friendly
High performance alternative to uncoated sand
•
Economic alternative to low-density ceramic proppants
TECHNICAL CONSIDERATIONS
•
Precured resin coated proppants are not designed to prevent flowback of proppants after fracturing; however, they
provide better flowback control than uncoated proppants. Use curable resin coated proppants to prevent proppant
flowback.
HCD-7142 (Rev. 6/14/2017 12:04:45 PM)
Page 1 of 4
PR6000 (Canada)
Chemical Properties
Typical
Physical Properties
Typical
Composition
resin coated frac sand
API Mesh Size
20/40, 30/50
Resin Type
precured
Physical State
solid granule
reddish-brown
Specific Gravity
2.59, 2.61
Color
Bulk Density
Solubility, weight %
in water, brine and HCl
nil
g/cm3 [lb/ gal]
in HCl/HF acid, API RP
19C
≤ 0.3
Pipe Fill Factor
in oil
nil
Absolute Volume
Compatibility
Fully compatible with most
commonly used fracturing
fluids, both water and oilbased systems. Testing with
cm3/g [gal/ lb]
cm3/g [gal/lb]
fluids prior to pumping is
advised.
HCD-7142 (Rev. 6/14/2017 12:04:45 PM)
1.57 [12.5], 1.58 [13.2]
0.637 [0.0763], 0.633 [0.0758]
0.386 [0.0463], 0.383 [0.0459]
Particle Size Distribution meets or exceeds API RP 19C
Turbidity, NTU (FTU)
< 250
8/10
Page 2 of 4
PR6000 (Canada)
Contact Information
Hexion
Oilfield Technology Group
633 - 6th Ave. SW, Suite 400
Customer Service
+1 800 626 2116
[email protected]
Technical Inquiries
[email protected]
Calgary, AB, Canada T2P 2Y5
+1 403 705 0950
www.hexion.com/oilfield
® and ™ Licensed trademarks of Hexion Inc.
DISCLAIMER
The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the
responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use
of the product and to determine the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION
MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING
THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an
offer for the sale of any product.
HCD-7142 (Rev. 6/14/2017 12:04:45 PM)
Page 3 of 4
PR6000 (Canada)
PDS-7142- (Rev.6/14/2017 12:04:41 PM)
HCD-7142 (Rev. 6/14/2017 12:04:45 PM)
Page 4 of 4