Swiss DT
Swiss GT
Swiss ST
CT 20
Machine options
Machine options
Description
Adaptation for a F13 (76-357) collet Ø 10 mm
Main spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
256-0942
CT 20
257-0942
Counter spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
256-4042
CT 20
257-4042
Adaptation for a F20 (76-201) collet. Max Ø 16 mm
Main spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-0940
Counter spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-4040
Adaptation for a F25 (76-64) collet Max Ø 20 mm
Main spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-0942
248-0942
CT 20
246-0942
Counter spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4042
248-4042
258-4042
CT 20
246-4042
Adaptation for a NEUKOMM collet F26 (No.511.001)
Main spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-0943
2
Options Machine
CT 20
Description
Plate for 1 cutoff tool and 4 turning tools. Tool section 12x12 mm
or 1/2”x1/2” Rotation to the right. Mounts on platen 1 for work in
main operation
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
256-1010
CT 20
246-1011
Plate for 1 cutoff tool and 4 turning tools. Tool section 12x12 mm
or 1/2”x1/2”. Rotation to the right. Mounts on platen 1 for work in
main operation
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-1012
Plate for 3 turning tools. Tool section 12x12 mm or 1/2”x1/2”.
Rotation to the left. Mounts on platen 2 for work in main operation
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
256-1012
CT 20
246-1014
Plate for 2 turning tools. Tool section 16x16 mm. Universal
mounting (Takes up 2 positions)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-1016
Options Machine
3
Machine options
Description
Plate for 4 turning tools. Tool section 16x16 mm. Mounts
on platen 1 in main operation and counter operation. Takes up
4 positions
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1012
248-1012
CT 20
246-1018
Plate for 5 turning tools for front platen. Tool section 16x16 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1010
248-1010
CT 20
258-1010
Turning tool holder for 2 tools type ML16-SWISS-ST26-DUO.
For 2 tools with a section of 16 x16 mm. Mounts on platen 1 or 2
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-1020
Turning tool holder type ML16-SWISS-ST-26-JET For 1 tool with
a section of 16x16 mm. Mounts on platen 1 or 2
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-1021
4
Options Machine
CT 20
Description
Tool block for end work with 1 bore Ø 25 mm for work in counter operation. Machining depth : 65 mm (depending on part)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4140
248-4140
256-4140
258-4140
257-4140
CT 20
246-1670
Tool block for end work with 1 bore Ø 22 mm for work in counter operation. Machining depth : 65 mm (depending on part)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4130
248-4130
256-4130
258-4130
257-4130
CT 20
246-1680
Tool block for end work with 1 bore Ø 20 mm for work in counter operation. Machining depth : 65 mm (depending on part)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4120
248-4120
256-4120
258-4120
257-4120
CT 20
246-1690
Options Machine
5
Machine options
Description
Tool holder for steady tools takes ESX 16 collet (not included)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4110
248-4110
CT 20
256-4110
Support 3 holes Ø 25 mm for tools end amounts in counter
operation (not possible main operation)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-1121
Tool block for end work with 8 bores Ø 20 mm aligned to work
in main operation and counter operation simultaneously.
The aligned positions are T230 and T244 / T245 / T232 with
T246 / T247. Max machining depth in counter operation: 45 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-1210
Tool block for end work with bores Ø 22 mm with possibility to
work simultaneously in main and counter operation.
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1210
6
Options Machine
248-1210
256-1210
CT 20
Description
Collet holder extension, Ø 20 mm shank and 70 mm long, for
ER 16 collet (Collet not included)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4220
248-4220
256-4220
258-4220
257-4220
CT 20
246-1220
Collet holder extension, Ø 22 mm shank and 70 mm long, for
ER 16 collet (Collet not included)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1230
248-1230
256-1230
258-1230
257-1230
CT 20
246-1230
Collet holder extension, Ø 25 mm shank and 70 mm long, for
ER 16 collet (Collet not included)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-4240
248-4240
256-4240
258-4240
257-4240
246-1240
CT 20
247-2110
Double collet holder extension with a Ø 22 mm and 110 mm
long for ER 16 collet, used in the main and / or counter operation
(supplied without collet)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1235
248-1235
256-1235
258-1235
CT 20
257-1235
Options Machine
7
Machine options
Description
Double collet holder extension for ER 16, with Ø 25 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-1250
CT 20
247-2120
Rotating drilling / milling attachment with a spindle for
ESX 20 collet. Mounts on platen 1 or 2. (low type)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1620
248-1620
256-1620
258-1620
257-4600
CT 20
246-1620
Rotating drilling / milling attachment with a spindle for
ESX 20 collet. Mounts on platen 1 or 2. (low type)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1622
248-1622
Emulsion compatible
8
Options Machine
258-1622
246-1622
CT 20
Description
Rotating drilling / milling attachment with a spindle for
ESX 20 collet. Mounts on platen 1 or 2. (high type)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1630
248-1630
256-1630
258-1630
CT 20
246-1630
Rotating drilling / milling attachment with a spindle for
ESX 20 collet. Mounts on platen 1 or 2. (high type)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1632
248-1632
258-1632
CT 20
246-1632
Emulsion compatible
Rotating milling / slotting attachment with a spindle for ESX 20
collet. Max saw Ø 63 mm.
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1640
248-1640
256-1640
258-1640
CT 20
246-1640
Rotating milling / slotting attachment with a spindle for ESX 20
collet. Max saw Ø 63 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1642
248-1642
258-1642
CT 20
246-1642
Emulsion compatible
Options Machine
9
Machine options
Description
Rotating drilling / milling attachment with a right angle head
that can positioned angularly from 0 to 90°
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1650
248-1650
256-1650
258-1650
257-4650
CT 20
246-1650
258-4650 *
* 0° only
Rotating drilling / milling attachment with a right angle head
that can positioned angularly from 0 to 90°
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1652
248-1652
258-1652
CT 20
246-1652
Emulsion compatible
Base for an adjustable 0 to 90° angle double drilling / milling
attachment. Mounts on rear side of platen (max. 1).
Takes up 2 positions
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1672
CT 20
248-1672
Emulsion compatible
Module for an axial adjustable 0 to 90° angle with spindles for
ESX16 / ESX12 collet. Mounts on option 1672 (max. 2)
(max machining depth : 30 mm) (supplied without collet)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1677
248-1677
Emulsion compatible
10
Options Machine
258-1677
CT 20
Description
Double, axial drilling attachment with spindle for ER 11
(supplied without collet)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1660
248-1660
256-1660
258-1660
CT 20
246-1660
Double, axial drilling attachment support (supplied without
collet)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1662
248-1662
CT 20
258-1662
Emulsion compatible
Additional double axial drilling. Mounts on option 1660 (max. 1)
with spindle for ER 11 (supplied without collet)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1665
248-1665
256-1665
258-1665
CT 20
246-1665
Additional double axial drilling. Mounts on option 1662 (max. 2)
with spindle for ER 11 (supplied without collet)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1667
248-1667
CT 20
258-1667
Emulsion compatible
Options Machine
11
Machine options
Description
Front tool spindle near backspindle for ER 16, max 8000 rpm.
Set of 2 spindles
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
247-3100
S51 motorization to drive the back working tools
(max 4 rotating tools)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
258-4500
CT 20
257-4500
Radial polygon milling attachment. Takes 3 positions
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1700
12
Options Machine
248-1700
256-1700
258-1700
246-1700
CT 20
Description
Insert type polygon cutter (inserts not included)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1710
248-1710
256-1710
258-1710
CT 20
246-1710
External thread whirling attachment with high speed rotation
of the tools with inclination of + / - 15°. Attachment takes up
3 positions. Mounts on high positions of platen 1 requires
options 1910 and / or 1920
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1900
248-1900
256-1900
258-1900
CT 20
246-1900
Thread whirling head till 10 mm + centering gage
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1910
248-1910
256-1910
258-1910
CT 20
246-1910
Sharpening device for thread whirling cutters
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1920
248-1920
256-1920
258-1920
CT 20
246-1920
Options Machine
13
Machine options
Description
Rotating drilling / milling unit for platen 1 and 2 with spindle for
quick change holders. Max. cutting tool Ø 6.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2010
Rotating drilling / milling unit for platen 1 and 2 with spindle for
quick change holders. Max. cutting tool Ø 13.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2020
Rotating drilling / milling unit for platen 1 and 2 with spindle
for quick change holders. Through the holder coolant with a
120 bars max pressure. Max. cutting tool Ø 6.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-2030
14
Options Machine
CT 20
Description
Rotating drilling / milling unit for platen 1 and 2 with spindle for
quick change holders. Through the holder coolant with a 120
bars max pressure. Max. cutting tool Ø 13.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2040
Rotating drilling / milling unit for platen 1 and 2 with spindle for
quick change holders. Speed ratio : 1 : 3. Max. cutting tool
Ø 6.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2050
Rotating drilling / milling unit for platen 1 and 2 with spindle for
quick change holders. Speed ratio : 1 : 3. Max. cutting tool
Ø 13.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2060
Rotating drilling / milling unit with 2 spindles for platen 1 and 2
with spindles for quick change holders. Speed ratio : 1 : 1 and 1 : 3.
Through the holder high pressure
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2070
Options Machine
15
Machine options
Description
Rotating milling / slotting unit for platen 1 and 2 with spindle
for quick change holders. Max. saw Ø 63.0 mm. Speed ratio : 2 : 1
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2080
Rotating drilling / milling unit with spindle for quick change
arbors. Possible to adjust from 0 to 90 deg. For work in main
operation. Can go on platen 1 and 2
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2090
Rotating drilling / milling unit with spindle for quick change
arbors. Possible to adjust from 0 to 90 deg. For work in main
operation. Can go on platen 1 and 2. Through the holder high
pressure coolant : 120 bars max.
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-2100
16
Options Machine
CT 20
Description
Polygon attachment. Max 6000 rpm. Mounts on platen 1 for
work in main operations. Delivered without polygon insert
holder. (Oilmist extractor is advised)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2120
Adjustable angle milling attachment adjusting screws for fine
adjustment of -30° to + 90°. Mounting on carrier 1 and 2 for work
on main spindle
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2130
End working block with Ø 20 mm bore for holders with quick
change arbors
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2200
Steady holder, Ø 20 mm x 50 mm long for quick change arbors
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2205
Options Machine
17
Machine options
Description
End working block with Ø 25 mm bore for holders with quick
change arbors
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2210
Steady holder, Ø 25 mm x 60 mm long for quick change arbors
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2215
Quick change milling arbor Ø 5.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2230
Quick change milling arbor Ø 8.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-2235
18
Options Machine
CT 20
Description
Quick change milling arbor Ø 13.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2240
Quick change milling arbor Ø 16.0 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2245
Quick change holder for ER 11 collet. Internal locking nut
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2250
Quick change holder for ER 16 collet. Locking nut : 22 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2255
Options Machine
19
Machine options
Description
Quick change holder for ER 16 collet. Locking nut : 22 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2260
Quick change holder for ER 16
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2265
Extention for quick change holders
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2270
Dynamometric wrench used for thightning / losening the quick
change holders
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-2280
20 Options Machine
CT 20
Description
Plate for coolant through the center for 2 positions / Platen 1
with high pressure max. 120 bars and low pressure input (use
with 2010 until 2100 and / or 2200 and / or 2210)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2400
Plate for coolant through the center for 2 positions / Platen 2
with high pressure max. 120 bars and low pressure input (use
with 2010 until 2100 and / or 2200 and / or 2210)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2405
Plate for coolant through the center for 3 positions / Platen 1
with high pressure max. 120 bars and low pressure input (use
with 2010 until 2100 and / or 2200 and / or 2210)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2410
Plate for coolant through the center for 3 positions / Platen 1
with high pressure max. 120 bars and low pressure input (use
with 2010 until 2100 and / or 2200 and / or 2210)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2415
Options Machine
21
Machine options
Description
Plate for coolant through the center for 4 positions / Platen 1
with high pressure max. 120 bars and low pressure input (use
with 2010 until 2100 and / or 2200 and / or 2210)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2420
Plate for coolant through the center for 4 positions / Platen 2
with high pressure max. 120 bars and low pressure input (use
with 2010 until 2100 and / or 2200 and / or 2210)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2425
Mounting device / Preset adapter
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-2450
Sealing plug
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
246-2460
22
Options Machine
CT 20
Description
HF spindle Ø 22 mm, 60,000 rpm for light operations with
frequency converter and a processing unit for air.
Installation possible in main operation and / or counter
operation (max. 2 HF spindles per machine)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1800
248-1800
256-1800
258-1800
257-1800
CT 20
246-2300
HF spindle Ø 25 mm, 80,000 rpm for light operations with
frequency converter and a processing unit for air. Installation
possible in main operation and / or counter operation (requires
option 5001 and 2315 and / or 2325) (max. 2 HF spindles per
machine, button 2310 and / or 2300)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1810
248-1810
256-1810
CT 20
246-2310
HF support bore Ø 22 mm for 1 position for axial mounting in
main operation and / or counter operation
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1815
248-1815
256-1815
258-1815
CT 20
246-2315
HF support bore Ø 25 mm for 1 position for radial
mounting main operation and / or counter operation (used
with 2310 option)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1820
248-1820
256-1820
CT 20
246-2320
Options Machine 23
Machine options
Description
HF support bore Ø 22 mm for 1 position for axial mounting in
counter operation (T256-T259) (used with 2300 option)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1825
248-1825
256-1825
258-1825
257-1825
CT 20
246-2325
Frequency converter for Ø 22 mm and / or Ø 25 mm HF spindle
with 9 poles plug
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1830
248-1830
256-1830
258-1830
257-1830
CT 20
246-2330
HF spindle Ø 22 and/or Ø 25 adaptation. Including : Air conditioning unit with support and pneumatic connections and
electrical connecting wiring (max. 1 per machine) (possible only
with 0036)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1835
248-1835
548-1837
248-1837
24 Options Machine
256-1835
258-1835
257-1835
246-2353
CT 20
Description
Positioning B axis mounted on the rear platen X1 / Y1. Setting
angle from 0° to 135°. Max. 9000 rpm Motor - With 1 drive
module for axial machining along with 3 spindles with ESX 20
collet in main operation and ESX12 collet in counter operation
(supplied without collet) 1 Plate for 3 turning tools for rear
platen Tool section 16x16 mm (used only with with option 0036)
(incompatible with emulsion)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-0040
CT 20
248-0040
B axis option
Tool holder for frontworking with 1 hole Ø 22 mm with the
ability to work simultaneously in the main and / or counter
operation (Mounting in the middle position)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2005
CT 20
248-2005
B axis option
Tool holder for frontworking with 1 hole Ø 22 mm with the
ability to work simultaneously in the main and / or counter
operation (Mounting in the bottom position)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2010
CT 20
248-2010
B axis option
Tool holder for frontworking with 2 hole Ø 22 mm with the
ability to work simultaneously in the main and / or counter
operation (Mounting in the upper position)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2015
CT 20
248-2015
B axis option
Options Machine 25
Machine options
Description
Tool holder for frontworking with 3 hole Ø 22 mm with the
ability to work simultaneously in the main and / or counter
operation (Mounting in the upper position)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2020
CT 20
248-2020
B axis option
HF support, bore Ø 22 mm for 1 position (Mounting in the upper
position)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2030
CT 20
248-2030
B axis option
Rotating axial drilling / milling attachment to work in main
operation and counter operation Max speed : 6000 rpm for
ESX 20 collet in main operation and ESX12 in counter operation
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2035
CT 20
248-2035
B axis option
Outside thread whirling unit to work in main operation.
Setting angle of 0° to 25° Max speed : 6000 rpm (Supplied without
thread-whirling head)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-2040
B axis option
26 Options Machine
248-2040
CT 20
Description
Plate for 3 turning tools for rear platen. Tool section 16x16 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-1014
CT 20
248-1014
B axis option
Mechanical locking of counter-spindle activated pneumatically
(indexing increment 1°)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
247-4020
Specific customer functions including : 4 inputs and 4 outputs,
terminal holder for connection and software CE
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5001
248-5001
256-5001
CT 20
246-5001
Tool break detector to check for broken cutting tools.
Includes : detector, electrical interface and pneumatic control.
Max 2 units per machine
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5010
248-5010
548-5012
248-5012
256-5010
258-5010
257-5010
246-5010
CT 20
247-5010
Options Machine
27
Machine options
Description
Long parts extractor through the counter spindle with part
recovery outside the machine in a basket. Max part length :
600 mm Ø 20 mm. According to the part size it requires at least
1 of the following kit : 5031 / 5032 / 5033
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5030
248-5030
256-5030
258-5030
257-5030
246-5030
CT 20
247-5030
Reduction tube kit Ø : 4, 5, 6, 7, 8 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5031
248-5031
256-5031
258-5031
257-5031
CT 20
246-5031
Reduction tube kit Ø : 9, 10, 11, 12, 13 mm (Ø 9, 10, 11 mm for
Swiss DT 13 and Swiss GT 13)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5032
248-5032
257-5032
258-5032
257-5032
CT 20
246-5032
Reduction tube kit Ø : 14, 15, 16, 21 mm
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5033
28 Options Machine
248-5033
258-5033
246-5033
CT 20
Description
High pressure pump 60 bars with 20 l/min flow (CE) System is
independent from the machine. Compatible with the standard
20 bars pump. It uses 5 electrovalves (3x 20 bars and 2x 60 bars)
(ex-works)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
246-5040
High pressure pump adjustable from 20 to 140 bars includes
an additional tank of 60 liters and 4 independent outputs with
2 independent adjustable pressures for the lubrification of the
tools of which : two output for platen one output for the guide
bushing one output for the deep drilling (ex-works)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5050
248-5050
CT 20
256-5050
Chip conveyor CE, hinge type, without filter
(incompatible with 5030)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5424
248-5424
256-5424
258-5424
246-5424
CT 20
247-5422
Chip conveyor CE, hinge type with filter
(incompatible with 5030)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
CT 20
247-5424
Options Machine 29
Machine options
Description
Oilmist extraction device, mechanical filter. (includes motor
with brake)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5436
248-5436
256-5436
258-5436
257-5436
246-5436
CT 20
247-5436
Oilmist extraction device, with an electrostatic filter. (includes
motor with brake)
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5438
248-5438
256-5438
258-5438
257-5438
246-5438
CT 20
247-5438
Device for centralized oilmist aspiration
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5440
30 Options Machine
248-5440
256-5440
258-5440
257-5440
246-5440
CT 20
247-5440
Description
Fire extinguisher, automatic type KRAFT & BAUER FB703
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-5483
248-5483
256-5483
258-5483
257-5483
246-5483
CT 20
247-5483
Connectivity Pack Including : PC onboard connected to RJ45
plug of the machine and TISIS Tab software
Swiss GT 32 Swiss GT 26 Swiss GT 13 Swiss DT 26 Swiss DT 13 Swiss ST 26
548-6100
248-6100
256-6100
258-6100
257-6100
246-6100
CT 20
247-6100
Options Machine
31
Tornos
TORNOS SAthroughout
the world
Rue Industrielle 111
CH-2740 Moutier
Phone +41 (0)32 494 44 44
Fax +41 (0)32 494 44 03
[email protected]
tornos.com
Conforms to the European CE / CEM Safety Standards
This document is based on information available at the time of publication. While every
effort has been made to be accurate, the information contained herein does not purport
to cover all details or variations in hardware and software, nor to provide for every possible contingency in connection with installation, operation and maintenance. TORNOS SA
assumes no obligation of notice to holders of this document with respect to changes subsequently made. TORNOS SA makes no representation or warranty, expressed, implied, or
statutory with respect to, and assumes no responsibility for the accuracy, completeness,
sufficiency or usefulness of the information contained herein. No warranties of merchantability nor fitness for purpose shall apply.
Edition Mars 2016 – © Tornos 2016, All rights reserved cm
We keep you turning