Accessories
A wide range of accessories is available for the various Bruynzeel products, thus
enabling you to arrange your storage system space as efficiently as possible.
These accessories also allow you to tailor a storage solution to suit your own
requirements.
FOCUS ON CUSTOMER SATISFACTION
Accessories
Shelf perforated
2 and 3 rows
Reinforcement bar
Display shelf
Foldable display
Pull-out shelf
Drawer
ZT pendel frame for
lateral suspension
files and CD rom
Elba pendel frame
Use with solid dividing bars
or steel partition panels to
create sub-compartments.
Increase the maximum
permissible shelf load for
steel shelves with nominal
depth 350 mm and more.
Display shelf is used to
present documents.
The foldable display
combines the function of
display and storage.
Use as a writing desk, work
table or temporary storage of
smaller goods. For shelving
systems with 250 to 450
mm nominal depth.
Store smaller goods either
loose or packed. The drawer
may be divided into a
number of 55 mm sections,
at multiples of 55 mm, using
2 retainers and the required
number of partitions. For
shelving systems with 300 to
450 mm nominal depth.
To store documents in
Jalema/Zippel suspension
files. For shelving systems
with 350, 370, 390, 400
and 450 mm nominal depth.
To store Jalema CD rom
pocket files. For shelving
systems with 200 mm
nominal depth.
Store documents in Elba/
Leitz/Pendex suspension
pocket files. For shelving
systems with 350, 370,
390, 400 and 450 mm
nominal depth.
Shelf stop
Middle stop
Front stop
Label holder A5 / A6
l’Oblique /
TUB frame
LF frame
Pull-out frame
Multi-file
Make a positive stop along
the front or back edge of a
shelf.
Create an upright edge
between two shelves. For use
in double racks only.
To create a stop along the
front of a shelf.
To identify aisles.
Store documents in I’Oblique
suspension pocket files. For
shelving systems with 350,
370, 390, 400 and 450 mm
nominal depth.
Use to store documets in
two-point lateral suspension
files.
For shelving systems with
350, 370, 390, 400 and
450 mm nominal depth.
Store documents in several
types of suspension pocket
files. The files are only
accessible from above.
For shelving systems with
300 to 450 mm nominal
depth.
Multifunctional suspension
file for A4 documents.
Suitable for both under-shelf
filing and filing in pullout
frames. 1 file for V-, 15 mm
and 30 mm bottom. Undershelf filing only for shelving
system with 390 mm
nominal depth.
Accessories
Steel partition panel
Dividing bars
Sliding book
support
Clamping divider
Create closed section
partitions. Can only be
used in combination with
perforated shelves.
Divide compartments into a
number of open barred
partitions. For perforated
shelves only.
Available in left and right
hand versions and can be
locked in any position.
To keep rows of books or
documents upright.
U-shape for shelves with
200, 250 or 270 mm
nominal depth. W-shape for
shelves with 300 to 450
mm nominal depth.
Sliding doors and
roller front doors
Aisle safety for
Compactus® and
Compactus® Office
Hand wheel lock for
Compactus®
Floor lock for
Compactus® Office
To convert open shelving
units into closed modules.
Hand wheel push button
for each mobile. Ensures
safety of users in the aisle by
preventing movement of the
mobiles.
Central locking system
with a key installed on the
last mobile. To lock the
total system and protect
confidential material.
Central locking system. To lock
the total system and protect
confidential material.
The pictures in this brochure can show products that are not standard models.
Products subject to change.
ASB 1.3
Interconnection
mobiles for
Compactus®
To interconnect 2 mobiles.
The mobiles can be moved as
interconnected block.