fischer product range
Bonded anchor systems
Secure fastenings in all building materials.
fischer bonded anchor systems.
The right solution for all fastening questions.
Highbond system
Powerbond system
Superbond system
High performance
in cracked concrete
For variable and
efficient anchoring
Universal solution for cracked
and non-cracked concrete
 The FHB II Highbond system is a
bonded expansion anchor with a
conical anchor rod for maximum loads
and maximum safety in cracked
concrete.
 The first system with which either the
FIS HB injection mortar or FHB II-P resin
capsule or FHB II-PF resin capsule (fastcuring: at + 20 °C after
2 min. full strength) can be used at the
same capacity.
 Smallest edge distances and spacings
are feasible.
 The first system worldwide with the
unique Power Sleeve Technology. Due
to the advantages of expansion, the
conical geometry of the sleeve achieves
better introduction of loads into the
concrete.
 Very high load level in cracked and noncracked concrete with a high degree of
safety.
 Maximum comfort in planning and
installing due to approval for hammerand diamond-drilled as well as damp or
water-filled drill holes.
 Capsule and injection system for cracked
and non-cracked concrete, water-filled
and diamond-drilled drill holes.
 With variable anchorage depths from
4 x ds to 20 x ds with FIS SB injection
mortar.
 RSB resin capule is the first resin capsule
worldwide with approval for standard
threaded rods RLM in cracked concrete.
 Extremely wide range of application
temperatures: - 40 °C to + 150 °C.
Anchor installation still at - 30 °C with
RSB resin capsule.
Stair railings
Steel beams
Steel constructions
Crash barriers
Silo installations
High racks
Façade substructures
Balcony railings
Steel beams
Substructures
Noise barriers
Heavy steel constructions
Institut für Massivbau
Technische Universität
Darmstadt
0756
* fischerwerke GmbH & Co. KG
0756
* fischerwerke GmbH & Co. KG
0756
* fischerwerke GmbH & Co. KG
05
12
0756-CPD-0081
0756-CPD-0478
0756-CPD-0490
ETA-05/0164 - ETAG 001-05 Option 1
ETA-12/0160 - ETAG 001-05 Option 1
ETA-12/0258 - ETAG 001-05 Option 1
FIS HB 345 S
Powerbond
Superbond
12
FHB Dynamic
UMV Dynamic
FIS EM
The performance class among
the dynamic anchors
The capsule system
for anchoring dynamic loads
The specialist for rebar connections
 Highbond dynamic is a bonded
expansion anchor for cracked concrete
with a conical anchor rod, which is used
with FIS HB injection mortar.
Approved for anchoring predominantly
non-static (dynamic) tumescent and
alternating loads.
 The UMV dynamic is a bonded
expansion anchor for cracked concrete
with a conical anchor rod, which is used
with the UMV resin capsule. Approved
for anchoring predominantly non-static
(dynamic) tumescent and alternating
loads.
 The FIS EM epoxy mortar is the
specialist for post-installation rebar
connections and extreme applications
in cracked and non-cracked concrete.
 Design in highly corrosion-resistant
steel, approved for applications in
aggressive atmospheres, e.g. tunnels.
 The annular gap in the fixture is closed
with a clamping bush.
 Special shear load version FHB dyn V
for applications with particularly high
shear loades.
 The very high bond strength allows for
applications in water-filled and
diamond-drilled drill holes.
 The extremely low shrinkage of the
mortar makes FIS EM ideal for very
large drill hole diameters and for large
drill hole depths.
Sign structures
Transmission towers
Manufacturing robots
Manufacturing plants
Post-installed rebar connections
Heavy steel constructions
Manufacturing robots
Jet fans
Jib cranes
Lift guide rails
Bridge railings
Rail fastening
See ICC-ES
Evaluation Report
at www.ic-es.org
Institut für Massivbau
Institut für Massivbau
Institut für Massivbau
Technische Universität
Darmstadt
Technische Universität
Darmstadt
Technische Universität
Darmstadt
0756
* fischerwerke GmbH & Co. KG
10, 09
0756-CPD-0324
0756-CPD-0304
ETA-10/0012 - ETAG 001-05 Option 1
ETA-09/0089 - ETAG 001-05
for rebar connections
FIS EM
ESR-1990
Inspection agency:
IEA (AA-707)
fischer bonded anchor systems.
The right solution for all fastening questions.
FIS V
FIS VT
R Resin anchor
The versatile solution for anchoring in
non-cracked concrete and masonry
The solid injection mortar for anchoring in non-cracked concrete
The proven bonded anchor
with resin capsule
 The FIS V injection system is the allround talent for all important building
materials and almost all tasks in noncracked concrete, masonry and
reinforcement.
 The FIS VT injection system is the right
choice for all standard applications in
non-cracked concrete and masonry.
 The R resin anchor is a capsule system
which has been proven a million times.
 Can be used when the focus is not on
high loads.
 The RM pre-portioned resin capsule is
very easy to use and is particularly
suitable for overhead installations and
water-filled drill holes.
High rack storage
Air conditioners
Column bases
Pumps
High racks
Awnings
High racks
Crash barriers
 Additional versions FIS VW with short
curing times and FIS VS with extended
curing times are available.
 Wide range of accessories for almost all
applications.
Rescue ladders
Silos
Column bases
Steel constructions
See ICC-ES
Evaluation Report
at www.ic-es.org
Institut für Massivbau
Technische Universität
Darmstadt
0756
* fischerwerke GmbH & Co. KG
10, 02, 08
0756-CPD-0361
0756-CPD-0301
0756-CPD-0303
ETA-10/0383 - ETAG 029 masonry
ETA-02/0024 - ETAG 001- 05 option 7
ETA-08/0266 - ETAG 001- 05
for rebar connections
FIS V
ESR-1990
Inspection agency:
IEA (AA-707)
0756
* fischerwerke GmbH & Co. KG
0756
* fischerwerke GmbH & Co. KG
08, 12
08
0756-CPD-0302
0756-CPD-0483
0756-CPD-0300
ETA-08/0061 - ETAG 001-05 option 7
ETA-12/0180 - ETAG 029 masonry
ETA- 08/0010 - ETAG 001-05 Option 7
FIS VT
R
FIS P Plus
References
The injection mortar with approval for
anchoring in masonry
Kranhaus Köln
Apartment buildings
in Germany
Product: FHB II
 The FIS P Plus injection system is the
efficient solution for standard applications in masonry.
 Now with approval for the first time.
 Can be used when the focus is not on
high loads.
Gotthard Basis Tunnel
in Switzerland
Products: FIS EM, FIS A
National Stadium
in Poland
Product: FHB II
Gates
Wall consoles
Marina Bay Sands
in Singapore
Plumbing equipment
0756
* fischerwerke GmbH & Co. KG
12
0756-CPD-0424
ETA-11/0419 - ETAG 029 masonry
FIS P Plus
Satellite dishes
Product: FIS VS
In-house development and
production of chemical building
products
Development and production from a single source
As with the classic fixings made of plastic and metal, fischer also
relies on its own knowledge in research and development when it
comes to bonded anchors. In this way, internal research results and
market trends can be taken up quickly and converted into marketable
products. An invaluable advantage for trade, planners and installers
– innovation and reliability in a dynamic market environment.
Excellent processes
In 2008, the fischer plant for
chemical products became
"Factory of the Year" in the "German
Global Excellence in Operations
Award". In production and logistics,
lean and waste-free processes
based on the philosophy of the
fischer process system, and the
great dedication of our employees,
ensure a needs-oriented, fast and
seamless supply to our customers
worldwide.
Quality and safety
fischer offers their customers one of the broadest and most powerful product ranges worldwide for bonded anchor systems. We combine injection
cartridges or pre-portioned resin capsules with a broad range of anchor
media.
In this way, we combine our know-how from the areas of chemistry and
metals to create performance-optimised systems of the highest quality.
Guaranteed by several international approvals – security our customers
can rely on.
Design software
COMPUFIX for secure planning.
COMPUFIX makes design and construction easier.
 Design and construct steel and bonded anchors safely and efficiently
without great effort.
 An automatic calculation gives immediate information on the effect of your
change.
 The user-friendly Windows Vista interface enables use without the need
for lengthy training.
 Using 3D navigation, you can easily rotate, pan, tilt and zoom designs in
the space.
 An automatic wizard provides support with detailed instructions.
 Verifiable printout.
 Free downloads and updates at www.fischer.de
Example views from the COMPUFIX software
Our 360° service for you
As a reliable partner, we will always offer you support for your individual requirements
through advice and action:
 Our products range from chemical systems and steel anchors through to plastic anchors.
 Competence and innovation via in-house research and development.
 Global presence and active sales service in over 100 countries.
 Qualified application-specific consulting for efficient fastening solutions in line with
statutory guidelines. On-site consultations and site tests on request.
 External / internal training sessions, in-nouse seminars and CPD Seminars.
Your fischer partner:
Chemical Comparison Chart · 03/2013 · Printed in UK · Right to make technical changes reserved
 Design and construction software for specialist fastenings.