wComp™ Dynabeads (10 mg/ml) 5 ml
DynaMag-96 Side
wComp™
Release
Buffer
2 x 20 ml
oge
number
123.31D
IT
CONTENTS
2. TECHNICAL
Products
Descriptions
5.
• Prepare approximately
10
ml SUPPORT
of isolation
buffer
cells.
7 cells.for
Mix
wellper
and
incubate
secondary
antibodies
specific
for
mouse per
• 5x10
Prepare
approximately
10 ml
isolation
buffer
5x10
FlowComp™
Dynabeads® (10 mg/ml) 5 ml
2.2
DynaMag-96
Bottom
2.3 DynaMag-96
Side
Skirted
secondary
antibodies 2.3
specific
for of
mouse
® (10
antibodies for
flow
cytometry
staining.
• Skirted
Prepare
approximately
10
2.1 DynaMag-96
Side • Add 2 ml cold isolation
2.2
DynaMag-96
Bottom
DynaMag-96
Side
FlowComp™
Dynabeads
mg/ml)
5 ml
antibodies
for
flow
cytometry
staining.
buffer
to
wash
cells,
followed
byantibodies
centrifugation
2.1Cataloge
DynaMag-96
Side
2.2
DynaMag-96
Bottom
2.3 Dy
CatalogeCataloge
number number
123.32D
number
120.27
for
flow
cytometry
staining.
•
Add
2
ml
cold
isolation
buffer
to
wash
cells,
followed
by
centrifuga
Release
Buffer
2 x 20 ml
123.31D
Cataloge
number
123.32D
Cataloge
number
120.27
1.FlowComp™
KIT CONTENTS
• Add 2 ml cold isolation
bu
FlowComp™
Release
Buffer
2 x 20 ml
Cataloge
number
123.31D
Cataloge number 123.32D
Catalog
Isolation procedure
for 8 min. at 350xg.
Isolation
procedure
for 8 min.
at 350xg.
abeads® FlowComp™ Human CD8
Isolation
procedure
Dynabeads® FlowComp™ Human CD8
for 8 min.
at 350xg.
Human CD8buffer and add 25 µl7
• Resuspend 5x107 Dynabeads
MNCs in® FlowComp™
500 µl isolation
RODUCT
• Resuspend 5x10 MNCs in 500 µl isolation
buffer and7 add
2.Catalog
PRODUCT
DESCRIPTION
alog no. DESCRIPTION 113.62D
no.
113.62D
•
Resuspend
MNCs25
2.Catalog
PRODUCT
DESCRIPTION
• FlowComp™
Remove
and Human
discard
the
supernatant.
no.
113.62D• Remove and discard the supernatant. • Remove and5x10
CD8
Antibody.
9
discard CD8
the s
product
is
intended
for
positive
magneFlowComp™
Human
CD8
Antibody.
9
This
product
is intended
for
positive magnember of cells (MNC)
processed:
2x10
FlowComp™
Human
127.5mm
Number
of
cells
(MNC)
processed:
2x10
9
This
product
is
intended
for
positive
magne127.5mm
Number of cells7.3(MNC)
processed: 2x10
olation of CD8+ T cells from human
tic isolation of CD8+ T •
cellsAdd
from1human
+ T cells from human
7.3
16.5 to
tic isolation
of
CD8
ml
cold
isolation
buffer
the
cell
pellet
and
resuspend.
wComp™
Human
CD8
Antibody
1
ml
16.5
•
Add
1
ml
cold
isolation
buffer
to
the
cell
pellet
and
resuspend.
FlowComp™
Human
CD8
Antibody
1
ml
and incubate
for 10mmHuman
min
at
2 Antibody
– 8°C.
onuclear cells (MNCs). The supplied
Add well
1 mland
coldincubate
isolationfor
bu
FlowComp™
CD8
1 ml
9.2
Mix well and incubate for 10mmmin
at 2 •– 8°C.
mononuclear cells (MNCs). Mix
The well
supplied
9.2
Mix
mononuclear
cells
(MNCs).
The supplied
® (10 mg/ml) 5 ml
® (10 mg/ml) 5 ml
wComp™
Dynabeads
ocol describes
magnetic
labeling
and
FlowComp™
Dynabeads
® (10 mg/ml) 5 ml
protocol
describes
magnetic
labeling and
™
FlowComp™
Dynabeads
protocol
describes
magnetic
labeling ®
and
® and mix well.
85mm
85mm
7
•
Add
75
µl
resuspended
FlowComp™
Dynabeads
and
mix
well.
7
•
Add
75
µl
resuspended
FlowComp™
Dynabeads
ion from Release
5x10 MNCs.
the2 first
isolation
from Release
5x10 MNCs.
Addfollowed
75mlµlcold
resuspended
Fl
• InAdd
mlstep
buffer
to 7wash
by centrifugation
wComp™
Buffer In the2 first
x 20 step
ml
2 ml cold isolation buffer to wash••cells,
byisolation
centrifuga
FlowComp™
Buffer
x2 20
mlcold isolation
MNCs.
In the2followed
first
isolation
from Release
5x10
Add
2
bu
FlowComp™
Buffercells,
x 20 step
ml• Add
Comp™ Human CD8 Antibody
FlowComp™ Human CD8 Antibody
(mouseat 350xg.
™ (mouse
FlowComp™ Human CD8 Antibody (mouse for 8 min. at 350xg.
for 8 min.
for
8and
min.tilting.
at 15
350xg.
Incubate
for
15
min
at
2
–
8°C
under
rolling
at
2
–
8°C
under
rolling
and
tilting.
IgG2a antibody against humanIncubate
CD8) bind for
to 15 min
a antibody against human CD8) bind to
Incubate
for
min
at
2
–
IgG2a antibody against human CD8) bind to
+
2.
DESCRIPTION
RODUCT
DESCRIPTION
thePRODUCT
target cells.
In the second step CD8+ T
arget cells.
In the second step
2.
DESCRIPTION
T Remove and discard the supernatant.
thePRODUCT
target
cells.
In the second step CD8+ •
™ CD8 T
•
Remove
and
discard
the
supernatant.
•
Remove
and
discard
the
s
cells product
that have
thefor
antibodies
• Carefully
Place the remove
tube in the magnet for minimum
min.tube
Carefully
that have
thefor
specific
antibodies
•specific
Place
the tube inThis
theproduct
magnet
for the
minimum
1 min.
This
is bound
intended
positive
magnecells
that
have
specific
antibodies
product
is bound
intended
positive
magne• Place1 the
in the rem
ma
is bound
intended
for
positive
magneare isolation
captured of
by CD8
the +®
Dynabeads.
Indiscard
the
last the
aptured of
by CD8
the +Dynabeads.
In the
last Human CD8+ cells isolated
+ cells of
® last
tic
T cellsand
from
human
areCD8
captured
by CD8
the +Dynabeads.
In the
and
discard
theisolation
supernatant.
olation
T cells from
human
+ cells
®
tic
isolation
T cells
from
human
supernatant.
Human
isolated
with
Dynabeads
and discard
theisolation
supernata
with
Dynabeads
Human
CD8cold
isolated
with
Dynabeads
• resuspend.
Add
1 ml
buffer
to the
cell
pellet
and
resuspend.
•
Add
1
ml
cold
isolation
buffer
to
the
cell
pellet
and
•
Add
1
ml
cold
bu
step
beads
are
removed
from
the
cells.
mononuclear
cells
(MNCs).
The
supplied
beads
are
removed
from
the
cells.
step
beads
are
removed
from
the
cells.
onuclear cells (MNCs). The supplied FlowComp™ Human CD8
mononuclear
FlowComp™
Humancells
CD8 (MNCs). The supplied FlowComp™ Human CD8
123.21D DynaMag-2
protocol describes magnetic labeling and
protocol
describes
magnetic
labeling
and
col describes
magnetic
labeling
and12331D, 12332D
•
Remove
the
tube
from
the
magnet.
Add
at
least
1
ml
cold
isola
Catalog
nos.
12027,
® the
•
Remove
tube
from
th
•
Remove
the
tube
from
the
magnet.
Add
at
least
1
ml
cold
isolation
®
7
•
Add
75
µl
resuspended
FlowComp™
Dynabeads
and
mix
well.
Downstream
Applications
7 MNCs.
• Add 75 µl resuspended Flo
7 MNCs. In the first step
• InAdd
75 µl
FlowComp™
Dynabeads
andbuffer
mix well.
MNCs.
the first
stepresuspended
isolation
from 5x10
Downstream
Applications
nstream
Applications
In the first step
isolation
from 5x10
ion
from 5x10
and5 resuspend
the bead-bound cells
by gentle
pipetting the
5 tim
buffer
and resuspend
buffer(mouse
and
thecells
bead-bound
cells
by(mouse
gentle
pipetting
times. DynaMag-2
123.01D
DynaMag-15
Antibody
123.01D
DynaMag-15
FlowComp™
Human
CD8
Antibody
Isolated
cellsHuman
may
beCD8
used
directly
in
anyresuspend
123.01D DynaMag-15 FlowComp™
Comp™
Human
CD8
Antibody
(mouse
Isolated
may
be
used
directly
in
any
ted
cells
may
be
used
directly
in
any
Pub.
No.
MAN0014604
•
Concentrates
the
beads
at
the
side
of
each
well.
•
Concentrates
the
beads
at
the
bottom
of
each
well
•
Concentrates
the
beads
pellets
at
the
side
of
each
well.
• Concentrates
the the
beads
at the
side of
well.
Concentrates
at
the bottom
ofand
eachtilting.
well
Conce
ncentrates the beads at the side of each well.
• Concentrates
the beads
at thehuman
bottom
of
each
well
•at
Concentrates
beads
pellets
ateach
the
of each well.
Incubate
for• 15
min at 2the
– beads
8°C under
rolling
IgG2a
antibody
against
CD8)
bind
to 15 min
Incubate
for 15 min •at
2–
123.20D
DynaMag-Spin
IgG2a
antibody
against
human
CD8)
bind
to side
application
such
as
flow
cytoIncubate
for
2 •–volume
8°C
under
rolling
and
tilting.
application
such
as
flow
cyto123.02D
DynaMag-50
a antibody
against human
CD8)
to
123.20D
123.02D
DynaMag-50
•downstream
Working
volume
5-200
µl
Working
volume:
5-200
μl
•volume:
Working
volume
µlPlace
nstream
application
such as
flowbind
cytoHolds:
16
standard
ml
•downstream
Working
5-200
µl
• Working
5-200
μl 5-200
• Worki
DynaMag-50
• DynaMag-15
Place
the remove
tube
in •the
magnet
minimum
1microcenmin.tube
Carefully
rem
+ T
• 1.5
the
in the
ma
•target
Working
volume
µlDynaMag-Spin
rking volume
5-200 µl
• Working
volume:
5-200Inμl
+ T
™
™
™ for
the
target
the 123.02D
second
step
CD8
•products
Place
the
tube
inthe
the
magnet
minimum
1
min.
Carefully
+ T
DynaMag-15
Infor
the5-200
second
stepand
CD8
metry.
For cells.
recommended
and
prometry.
For cells.
recommended
products
proarget
In the
second
stepand
CD8proDynaMag-15
y.
For cells.
recommended
products
Rev.
Date:
September
2015
(Rev. A.0)
trifuge
tubes
and discard
the in
supernatant.
and discard
the
supernata
cells
have
bound the specific
• Carefully
Place
the tube
the magnet for
minimum
1 the
min.tube
Carefully
rem
cells
that
have
bound
the
specific
• Place
in
the
ma
tocolsthat
visit
www.invitrogen.com/immunolotocols
visit
www.invitrogen.com/immunoloandantibodies
discard
supernatant.
have
bound the specific antibodies
• Place
the tube
in
the
for
minimum
Holds:
Holds:
DynaMag-50
•the
Holds:
4
x magnet
standard
5 ml
and
15 antibodies
ml1 min.
Holds:
Holds: 5Holds:
Holds:
sthat
visit
www.invitrogen.com/immunoloDynaMag-50
• Holds: 4 x remove
standard
ml and 15 mlDynaMag-Spin
Holds:
s:
Holds: are
DynaMag-50
• Holds: 4 x standard
5PCR
ml
and 15
captured
by ml
the Dynabeads.
In the last Human
are
captured
bystrips
theDynaMag-Spin
Dynabeads.
In the
• •Working
volume:
µldiscard the supernata
+ cells isolated
® last
+ cells
® 10-1000
and
discard
supernatant.
and
aptured by the Dynabeads. In the last Human CD8+ cells isolated
CD8
with Dynabeads
•gy.
Strips
• PCR
96-well
skirted
Human
CD8
isolated
with12332D
Dynabeads
•gy.
PCR
Strips
•the
PCR
strips
• 96-we
®
tubes
•PCR-plates*
Holds:
6 x 2standard
1.5
mlml
tubes
and
discard the
supernatant.
Cat.
no.
12331D
Cat.
no.
12027
Cat.
no.
with
Dynabeads
R Strips
• PCR strips
• 96-well
skirted
PCR-plates*
•
Holds:
2
x
standard
50
ml
tubes
step
beads
are
removed
from
the
cells.
•
Holds:
x
standard
50
tubes
step
beads
are
removed
from
the
cells.
•
Remove
the
tube
from
the
magnet
and
carefully
resuspend
the
be
tubes
•
Remove
the
tube
from
•
Holds:
6
x
standard
1.5
ml
2 x standard
50 •ml
tubes
FlowComp™
Human
CD8PCR style
• 96-well PCR-plates* • Holds:
•PCR-plates*
96-well
plates*
• Can
be plates*
used to holds
work with
beads are removed from the cells.
FlowComp™
Human
CD8
96-well
• 96-well
PCR
style
• Canthb
• Remove
the• tube
from
magnet
andwith
carefully
resuspend
the
beadThe
DynaMag-2
up culture
to 16 plates.
microFlowComp™ Human
CD8
well PCR-plates*
• 96-well
PCR style plates*
• volume
Canthe
be requirements
used
tomlwork
culture •plates.
Working
1-15
Store at ambient temperature
• Remove
Working
volume
ml- 96-well
• bottom
Working
volume:
10-1000
µl
Additional
requirements
Additional
bound
cells
in
11-15
ml
FlowComp™
Release
Buffer.
bound
cells
in
1 cold
ml
FlowC
Working
volume:
5-50
ml
• bottom
Working
volume:
5-50
ml
•
the
from
the
magnet.
Add
at
least
1
ml
-ml
half
skirted
(200µl)at• the
- half-skirted
(200
μl)
round
plates
•
Remove
the
tube
from
th
-FlowComp™
half•
skirted
(200µl)
-tube
half-skirted
(200
μl)
-isola
96-w
•
Working
volume
1-15
•
Working
volume:
10-1000
µl
•
Beads
collect
side
of
each
well.
Beads
collect
at
the
side
of
each
well.
tional
requirements
•
Beads
collect
at
the
of
each
well.
centrifuge
tubes
and
gives
you
a
very
bound
cells
in
1
ml
Release
Buffer.
Working
volume:
5-50
ml
• Remove the tubeDownstream
from
thebuffer:
magnet.
at
least
1 mlmagnet
cold isolation
Downstream
alf skirted (200µl)
- half-skirted
(200 μl)Applications
- 96-well
round
bottom
plates
Applications
2+Add
non-skirted
non-skirted
-the
96-well
flat
bottom
plates
• -I
solation buffer: Ca2+ and Mg2+ free This magnet
-the
non-skirted
- be
non-skirted
• -I
solation
Caby
can- be
rotated
360
and deMg2+ The
free This
rotated
bybead-bound
360
deThisThe
magnet
fits
in96-w
t
nstream Applications
buffer
andincan
resuspend
cells
by
pipetting
5
tim
buffer
andcomfortably
resuspend
unit
is ergonomically
designed,
alis gentle
ergonomically
designed
efficient
separation
ofunit
proteins
and
-the
96-well
flat bottom
plates
on-skirted
non-skirted
olation
buffer: Ca2+ and Mg2+ free This magnet can- be
rotated
bycells
360may
deThis
magnet
fits
comfortably
the
buffer
and
resuspend
bead-bound
cells
by
gentle
pipetting
5
times.
Isolated
be
used
directly
in
any
Isolated
cells
may
be
used
directly
in
any
The
unit
is
ergonomically
designed,
al•
Working
volume:
5–200
µL.
•
Working
volume
5–200
µL.
Incubate
for
10
min.
in
room
temperature
under
rolling
and
tilting
Incubate
for
10
min.
in
ro
24-well
plates
phosphate
buffered
saline
(PBS)
from
24-w
phosphate
buffered
saline
(PBS)
from
•
Working
volume
5–200
µL.
grees,
giving
you
the
flexibility
to
work
grees,
giving
you
the
flexibility
to
work
palm
of your
hand
and
a ve
This
magnet
features
7 bar
magnets
with
a hard
plasThis
plate
magnet
features
96
round
magnets
(with
This plate magnet features 7 bar
magnets with
a10
hard
plas-plate
This
plate
magnet
features
96lowing
round
magnets
(with
one
lowing
you magnet
to
rest
your
elbows
on
you
to tilting.
rest
your
elbows
on
the The
ted
cells
may
be used
directly
any
for your
min.
room
temperature
under
rolling
and
nucleic
acids.
lightweight
isonegives
-in24-well
plates
osphate
buffered
saline
(PBS)in from
flexibility
to
work
palm
ofml.
your
hand
andto
gives
avolumes
very
downstream
application
such
as
flow
cytodownstream
application
suchfitIncubate
as
flow
cytoplate
magnet
features
7 bar
magnets
withgrees,
a hard giving
plas- you
Thisthe
plate
magnet
features
96stable
round
magnets
(with
onesample
12-w
Gibco
(cat.no.
14190-094)
supplemented
12-well
plates
Gibco
(cat.no.
14190-094)
supplemented
lowing
you
to
rest
elbows
on
the
with
sample
up
to
15
ml.
You
with
volumes
up
to
15
You
tic
top
witch
ensures
a
stable
fit
for
96-well
PCR-plates.
This
centred
at
the
bottom
of
each
well)
to
ensure
identical
tic
top
witch
ensures
a
for
96-well
PCR-plates.
This
centred
at
the
bottom
of
each
well)
ensure
identical
efficient
separation
of
proteins
and
n
• with
Place1
the
the rem
ma
• Place and
the tube
the magnet
forhold,
minimum
min.tube
nstream
application
suchfitsupplemented
as
cytoworkbench
and
tiltCarefully
thein magnet
workbench
tiltnuthein magnet
toplates
a to
- 12-well
plates
bco
(cat.no.
14190-094)
comfortable
numbered
For
recommended
products
and
prometry.
For
recommended
and
prowith sample
to 15
ml.
You
p witch
ensures
a stable
forflow
96-well
PCR-plates.
This volumes
centred up
at
the
bottom
of
each
well)
ensure
efficient
separation
proteins
and
- 6-w
with
0.1%
BSA
and
2mM
EDTA
(see
- 6-well
with
0.1%
BSA
and
2mM
EDTA
(see
•products
Place
the
tube
inmetry.
the
magnet
for
minimum
1
Carefully
remove
• This
Mix
the
cells
by
gentle
pipm
Mix
the
cells
by
gentle
pipetting
5position.
times
and
place
the
tube
in volum
the
workbench
and
tilt
the
magnet
athe
magnet
collects
Dynabeads
at one
the
sidemin.
of•of
the
wells.
With
sample
handling
aton
each
magnet
pulls
the
magnet
collects
the
Dynabeads
attothe
side
ofidentical
the
wells.
With
sample
handling
aton
each
position.
This
magnet
pulls
the
can
work
with
5the
ml
flow
tubes
one
can
work
with
5 to
ml
flow
tubes
Holds:
cleic
acids
from
small
sample
Holds:
y.
recommended
and
proand
discard
the
supernata
and
discard
supernatant.
convenient
angle
during
use.
convenient
angle
during
use.
slowly
- Holds:
6-well
plates
th For
0.1%
BSA
and products
2mM
EDTA
tocols
visitconcentrated
www.invitrogen.com/immunolotocols
visit
www.invitrogen.com/immunoloMix
the
by
gentle
pipetting
5cleic
times
and
place
the
tube
in1
the
magsample
for
your
convenience.
8plates
-By
Nots
Technical
Support
for
further
informatinet
collects
the
Dynabeads
at the
side(see
of the
wells.
With
handling
at
each
This
pulls
the
-By
Not
recommended
for
use
with
48-well
Support
for
further
informatican
work
with sample
5 ml flow
tubes
on
oneposition.
acids
from
small
sample
volumes
the
beads
at
the
side
of
the
wells,
all
residual
Dynabeads
to
the spaces
bottom
of
each
well,
allowing
for
elution
theTechnical
beads
concentrated
at •the
sidemagnet
of
thecells
wells,
all
residual
Dynabeads
to
the
bottom
of
each
well,
allowing
for
elution
and
discard
the
supernatant.
net
for
1
min.
convenient
angle
during
use.
By
slowly
net
for
min.
™
rack,
or
simply
flip
it
to
use
15
ml
tubes
rack,
or
simply
flip
it
to
use
15
ml
tubes
due
to
the
angle
of
the
magnetic
schnical
visit
www.invitrogen.com/immunoloturning
therack
tubes
in the magnetfie
d
- •
Not96-well
recommended
for PCR-plates*
use with 48-well
plates
Support
for
further
informatiturning
the tubes inin the
magnet
during
DynaMag
magnets
arerack,
designed
to Dynabeads
gy.
on).
on).
eads concentrated
at the
side
of the wells,
all residual
to
thebe
bottom
of without
each well,
allowing
elution
spaces
on
each side
of the
make
net
1for
min.
•
PCR
Strips
skirted
•flipped,
PCR
strips
or simply
flip it togy.
use
15
ml
tubes
fluid
can
be
without
theof
bead
pellet.
very
small
volumes.
Thistub
pla
due
to disturbing
the angle
the
magnetic
field.
fluid
can
removed
disturbing
the
bead
pellet.
in removed
very
small
volumes.
This
plate
magnet
features
6 bar-magnet
which
collect
the
onRemove
the
other.
Once
the
magnet
turning
thefor
tubes
in
during
onthe
themagnet
other.
Once
flipped,
the
magnet
Holding
up
to 6you
microcentrifuge
• carefully
Remove
the
tube
from
th
•column
the
tube
from
the
magnet
and
resuspend
theconbe
). be removed without disturbing the bead pellet.
separation
can
concentrate
separation
you
can
concentrate
the
can
in
very
small
volumes.
This
plate
magnet
features
6
bar-magnet
which
collect
the
The
DynaMag-96
Side
magnet
has
an
extra
(13
in
Dynabe
this
magnet
scaleable
with
96
well
•
Mixer
allowing
both
tilting
and
rotation.
The
DynaMag-96
Side
magnet
has
an
extra
column
(13
in
Dynabeads
at
the
side
of
the
well.
With
the
bead
•
Mixer
allowing
both
tilting
and
rotation.
provide optimal magnetic
separation
on the other. Once flipped,
the magnet
Holding
up to 6 with
microcentrifuge
tubes
•
Transfer
the
supernatant
When
used
in combination
with
DynaMag-96
Side
or
•
Transfer
the
supernatant
containing
the
bead-free
cells
to
a
new
•
Remove
the
tube
from
the
magnet
and
carefully
resuspend
the
beadWhen
used
in
combination
DynaMag-96
Side
or
will
remain
in
position
until
adjusted.
separation
you
can
concentrate
the
will
remain
in
position
until
adjusted.
in
numbered
spaces,
the
circular
tt
Additional
requirements
Additional
requirements
bound
cells
in
1
ml
FlowC
bead
pellet
on
the
tube
wall.
• 96-well
PCR-plates*
•
Compatible
with
culture
plates
bound
cells
intube
1 ml
FlowComp™
Release
Buffer.
pellet
on
the
tube
wall.
•
96-well
PCR
style
plates*
DynaMag-96
Side magnet
has
an extra column
(13 in in When
Dynabeads
at MPC™):
the
side
ofbead-free
the
well.bead
With
the
bead
conxer allowing both
tilting and
rotation.
total).
This
design
feature
enables
sample
mixing
simply
centrat
total).
design
feature
sample
mixing
simply
centrated
at the
side
of the
well,
all residual
canthe
be
• enables
Transfer
the
containing
the
to
athe
new
sample
plates,
for
subsequent
automaused
inThis
combination
with
DynaMag-96
Side
orml
DynaMag
-96the
Side
Skirted
on
an
automation
platform,
will
remain
position
adjusted.
• FlowComp™
Magnet
(Dynal
See
www.invitro™
DynaMag
-96 numbered
Side
Skirted
on ancells
automation
platform,
in
spaces,
the
circular
top
• until
Magnet
(Dynal
MPC™):
www.invitroand
place
the
tube
in
requirements
Flipping
during
separation
2+
and
place
the
tube
in
magnet
for
1 min
to
remove
allfluid
residual
Flipping
magnet
during
separation
bound
cells
insupernatant
1the
Release
Buffer.
bead
pellet
on
the
tube
wall.
rack
can
be
quickly
removed
from
t
2+ See
of MPC™):
Dynabeads
magnetic
beads
from DynaMag
•bythe
I
solation
buffer:
Ca
and
Mg2+forth
free
.tional
This(Dynal
design
feature See
enables
sample mixing
simply
centrated
at96-well
the
side
ofback
the
well,
all
residual
canmagnet
be
•by-96
I
solation
buffer:
Ca
and
Mg2+
free
shifting
the
plate
and
from
thefluid
rightremove
shifting
the
96-well
plate
back
and
forth
from
rightremoved
without
disturbing
the
bead
pellet.
With
a
strong
magnetic
field,
this
With
a
strong
magnetic
field,
this
magSide
Skirted
on
an
automation
platform,
these
magnets
allow
for
significant
volume
changes
within
agnet
www.invitrogen.com/magnets-selection
for
magnet
tion.
these
magnets
allow
for
significant
volume
changes
within
gen.com/magnets-selection
for
magnet
and
place
the
tube
in
the
magnet
for
1
min
to
remove
all
residual
berack
canposition.
be
removed
from
the
2+ and Mg2+ free Flipping the magnet during
Half-Skirted
separation
(200
μL)
96-well
without
round
bottom
plates
will
youforcollect
any
bead-bound
Half-Skirted
This
(200
μL)in
ads.
willin help
you
collect
any
bead-bound
magnet
the
base,
ready
for
vort
ads.
Incubate
for
10
min.
in
ro
phosphate
saline
(PBS)
from
olationthe
buffer:
Ca
Incubate
10
min.
in
room
temperature
under
rolling
and
tilting
most
position
tobuffered
the
left-most
Each
shift
in help
position
This
ms
phosphate
saline
(PBS)
from
hifting
96-well
plate
backfor
andmagnet
forth matrices.
from the rightremoved
disturbing
thequickly
bead
pellet.
most
position
tobuffered
the
left-most
position.
Each
shift
position
magnet
can
be
used
for
mixing
the
same
way
as
With
a
strong
magnetic
field,
this
magnet
gives
quick
and
efficient
cell
a
workflow:
these
magnets
allow
for
significant
volume
changes
within
recommendations.
net
gives
quick
and
efficient
cell
sepadiverse
liquid
sample
n.com/magnets-selection
a
workflow:
recommendations.
willin help
you collect causes
any
bead-bound
cells
that
may
have become
stuck
inxing,
magnet
in for
the
base,
ready
for
vorteads.
The
sample
rack
canration
be
quickly
removed
Gibco
(cat.no.
14190-094)
supplemented
that
may
have
become
stuck
inthe
Incubate
forcells
10
min.
in
room
under
rolling
and
tilting.
spinning
manual-96
sample
sha
osphate
saline
(PBS) Each
fromshift
causes
the
Dynabeads
to
beused
pulled
to
opposite
tube
describ
Gibco
(cat.no.
14190-094)
supplemented
position tobuffered
the left-most
position.
position
This
magnet
can
be
mixing
the
same
way
as
the
Dynabeads
tonet
be pulled
toquick
the opposite
tube
wall.
for
DynaMag-96
Side.
• High
wash
volumes
(DynaMag-96
Side
or or
DynaMag
gives
and
efficient
cell
sepafrom
viscous
samples
suc
a workflow:
Non-Skirted
cytometry
temperature
flat
bottom
plates
•96-well
High
wash
volumes
(DynaMag-96
Side
orwall.
DynaMag
-96
commendations.
Non-Skirted
described
• ecommended Flow cytometry antiration
from
viscous
samples
suchtubes
as
™
• ecommended Flow cytometry anti• R
Flow
cytometry
antibody
reagents
• R
Flow
reagents
(optiotube
Slowly
turning
the
ining.
• and
Transfer
the
supernatant
c
cellstube
that
have become
stuck
inantibody
with
0.1%
BSA
and
2mM
EDTA
xing,
or
manual
sample
shakContinuous
reciprocal
shifting
results
a (see
continuous
mixing
Dynabeads
magnetic
beads
can
be used
bcothe
(cat.no.
14190-094)
supplemented
the-96
tube
lid.
Slowly
turning
thespinning
tubes
inin(optioMix
theDynaMag-96
cells
by
gentle
pip
Transfer
the
supernatant
containing
the
bead-free
cells
to
ainnew
tu
from
the
magnet
allowing
for
washing
with
0.1%
BSA
and 2mM
EDTA
(see
You
can
perform
your
entire
exp
es
Dynabeads
to be pulled
to the opposite
wall.may
described
for
DynaMag-96
Side.
Continuous
reciprocal
shifting
aviscous
continuous
mixing
• the
Mix
thelid.
cells
by
pipetting
times
place
the
tube
the
m
Sidegentle
Skirted)
When
u
• High wash
volumes
(DynaMag-96
Side
orinDynaMag
whole
blood.
The
DynaMag-50
ca
Side
Skirted)
When
used
in 5
combination
with
Bottom
on
body reagents CD3-Alexa Fluor 488 rationresults
from
samples
such
as
commended Flow cytometry antiwhole
blood.
The
DynaMag-50
can
be
body reagents CD3-Alexa Fluor 488 nal):
see
www.invitrogen.com/immunoloow
cytometry
antibody
reagents
(optional):
see
www.invitrogen.com/immunoloTechnical
Support
for
further
informatithe
magnet
will
concentrate
the
bead
the
tube
lid.
Slowly
turning
the
tubes
in
Transfer
thethe
supernatant
containing
the
bead-free
cells
tofor
ainnew
tube.
Technical
Support
for of
further
informatith
0.1%
BSA shifting
and 2mM
EDTA
Add
2 types
ml
isolation
buffe
ing.
You
can
perform
your
entire
expemagnet
will
concentrate
the
bead
nuous
reciprocal
results
in a (see
continuous
mixing
riment
in
the
magnet,
just
remove
t
and
vortexing
with
the
tubes
in
situ.
•
Mix
the
cells
by
gentle
pipetting
5
times
and
place
the
tube
the
magnet
for
1
min.
6-,
12-,
and
24-well
plates
The
benefits
of
this
type
of
mixing
are:
•
Low
(5μl)
elution
volumes
(DynaMag
-96
Bottom)
an
auto
Add
2
ml
isolation
buffer
followed
by
centrifugation
for
8
min
net
1
min.
(Cat. No. MHCD0320), CD8-PE (Cat. No. The
benefits
of
this
type
mixing
are:
•
Low
(5μl)
elution
volumes
(DynaMag
-96
Bottom)
an
automated
platform,
these
alow
for
significant
volume
Side
Skirted)
When
used
in
combination
with
DynaMag-96
Bottom
on
used
with
all
of
Dynabeads.
to
isolate
cells,
proteins,
nucleic
acids,
or
gy forcan
recommended
products and proto•(Cat. plate
magnet
features
7The
barDynaMag-50
MHCD0320), CD8-PE (Cat. No. whole
blood.
be
dy reagents CD3-Alexa Fluor 488 •
This plate magnet features 96 round
usedpellet
with
all
types
of
gyThis
forNo. recommended
products
and
on).
l): see
www.invitrogen.com/immunoloon
the
tube
wall.
on).
chnical
Support
for offurther
informatithe magnet will
concentrate
the
bead (DynaMag
riment
the
magnet,
justfor
remove
theDynabeads.
• No
physical
interaction
with
the
liquid
volume
during
the
pellet
on
the
tube wall.
350xg.
resuspend
beads – change
you c
Add
2 protomlmin.
isolation
buffer
followed
byin
centrifugation
8volume
min.
at The
magnet
can
be to
used
with all the
types
MHCD0804).
• No
physical
interaction
with with
the
liquid
the
changes
within
aunit
workflow
net
for
1volume
350xg.
benefits
of this type
mixingand
are:proto• Low
(5μl)
elution
volumes
-96
Bottom)
an
automated
platform,
these
alow
significant
cols.
MHCD0804).
at. MHCD0320), CD8-PE (Cat. No. all
types
ofduring
Dynabeads.
cols.
forNo. recommended
products
Not
both
recommended
forfor
use
with
).
• mixing
Mixer
allowing
tilting
and rotation.
other biomolecules.
procedure
•new
High
magnets
with
aused
hard
plastic
magnets
(onevolumes
magnet
centered
at
the
pellet
onthe
the tube wall.• mixing
•store
Transfer
the
supernatant
Mixer
allowing
both tilting
and
rotation.topThe unit
unit
to resuspend
the
beads
can
even
the magnet
with
your
sam
The
unit –isyou
ergonomically
designed,
alprocedure
•Dynabeads.
High
wash
(DynaMag-96
Side
and
Sidea
Skirtet)
physical
interaction
with
the
liquid
volume
during
changes
within
a
workflow
350xg.
•
Transfer
the
supernatant
containing
the
bead-free
cells
to
t
is
ergonomically
designed,
al• R
ecommendations for evaluation of NOTE:
This
new
product
replace
HCD0804).
s.
• Recommendations for evaluation of NOTE: This new productofreplaces
the volumes
•
Reduced
chance
for
contamination
•
Low
•
Discard
the
supernatant
•
Magnet
(Dynal
MPC™):
See
www.invitro•
Reduced
chance
for
contamination
•
Low
elution
(DynaMag-96
Bottom)
xer
both tilting and rotation. The unit is ergonomically
in1to
amin
cold
room.
The
magnet
can
lowing
you
tothe
rest
your
elbows
on
theples
even
store
the magnet
with
your
samand
place
the
tube
in
theae
�
notes
ing allowing
procedure
•Critical
High
wash
volumes
(DynaMag-96
Side
and
Side
Skirtet)
48-well
plates
•
Discard
the
supernatant
and
resuspend
the
cell
pellet
in
preferred
•
Magnet
(Dynal
MPC™):
See
www.invitroviability is SYTOX Red (Cat. No. S34859).
•
Transfer
the
supernatant
containing
the
bead-free
cells
to
a
new
tube
lowing
you
to
rest
your
elbows
on
the
and
place
tube
in
the
magnet
for
to
remove
all
residual
designed,
alto
ensure
a
stable
fit
for
96-well
Dynal
MPC™-50
magnet.
�
Critical
notes
bottom
of
each
well)
ensure
identical
viability is SYTOX Red (Cat. No. S34859).
™
Dynal MPC™-50 magnet.
commendations for evaluation of NOTE: This new product• Reduced
replaces
the volumes
sample
degradation for magnet
Mix
Dynabeads
magnetic
beads
and
gen.com/magnets-selection
•
Reduced
sample
degradation
medium.
Keep
the
cells
o
workbench
and
tilt
the
magnet
to
a
duced
chance
for
contamination
•
Low
elution
(DynaMag-96
Bottom)
used
with
all
types
of
Dynabeads.
gen.com/magnets-selection
for place
magnet
ples
cold
The
magnet
can
be
This2 new
product
replacesuse
the in downstr
•magnet
Discard
the
supernatant
and
resuspend
the
cell
pellet
in
cell
agnet
(Dynal
medium.
Keep
theNOTE:
cells on
– 8°C
untilads.
further
Use
a mixer
provides
rotaworkbench
and
tilt that
the
magnet
to and
aroom.
elbows
on for
thevolume
and
the
tube
in the
magnet
forinloss
1atilting
min
to
remove
allpreferred
residual
beritical
notesMPC™): See www.invitro- lowing you to rest your
ads.
Use
a mixer
provides
tilting
and
rotability is SYTOX Red (Cat. No. S34859).
•• Reduced
risk
for
volume
Dynal
MPC™-50
magnet.
recommendations.
PCR-plates.
The
collects
the
sample
handling
at each
position.
•• Reduced
risk that
loss
*Because
plates may
vary,applications.
users
should test their*Becau
plates
duced
sample
degradation
convenient
angle during
use. MPC™-S
•ofThis
plate
features
6Dynabeads.
bar
with all
types
of
tion
the
tomagnet
ensure
that
Dynan.com/magnets-selection
for a magnet
Dynal
magnet.
your
sample
in
well
ofworkbench
a 96-well plate,
convenient
angle
during
use.
applications.
medium.
Keep
the
cells
on
2tubes
– used
8°C
until
further
use
in downstream
and tilt therecommendations.
magnet
a™ to ensure
tion
of the to
tubes
that Dynafor com
ads.
e a mixer
provides
tilting
and
rotaWhen
used
in
combination
with
DynaMag-96
Bottom
onplates
for compability NOTE:
™ supernatant
•
Flow
cytometry
antibody
reagents
(optioduced
risk that
for volume
loss
*Because
plates
may
vary,
users
should
test
their
When
used
in
combination
with
DynaMag-96
Bottom
on
beads
do
not
settle
at
the
bottom
of
the
This
new
product
replaces
tc
•
Transfer
the
commendations.
• Flow
cytometry
antibody
reagents
(optioDynabeads
magnetic
beads
at
the
The
magnet
pulls
the
Dynabeads
With
a
strong
magnetic
field,
this
magbeads
do
not
settle
at
the
bottom
of
the
•
Transfer
the
supernatant
containing
the
bead-free
cells
to
a
new
tu
convenient
angle
during
use.
applications.
magnets.
The
magnet
collects
an
automation
platform,
these
magnets
allow
for
signifin of the tubes
to
ensure
that
DynaWith
a
strong
magnetic
field,
this
magallowing the
beads
to bind
the target
nal):
see www.invitrogen.com/immunoloannal):
automation
platform, these magnets allow for signififor compability
tube.
MPC™-S
see www.invitrogen.com/immunolonads
used
with
DynaMag-96
Bottom on
Add
2magnet.
ml
isolation
buffe
tube.
NOTE:
This
new
product
replaces
the
net
gives
quick
and efficient
cellbeads
sepa-Dynal
ow
cytometry
antibody
reagents
(optiocant
volume
changes
within
a
workflow:
Add
2
ml
isolation
buffer
followed
by
centrifugation
for
8
min
do in
notcombination
settle
at the
bottom
of the With
•
Transfer
the
supernatant
containing
the
bead-free
cells
to
a
new
tube.
net
gives
quick
and
efficient
cell
sepaside
of
the
wells.
With
the
beads
™
magnetic
to
the
bottom
of
each
gy
for
recommended
products
and
protochanges
a workflow:
asignifistrong magneticcant
field,
mag- within
For350xg.
further technical advice p
thevolumes
Dynabeads
beads
gy volume
for this
recommended
products
and protoutomation
platform, these magnets
• High
This wash
product
should
notMPC™-S
bemagnetic
used
with
biomolecules
within allow
a fewforminutes.
further
technical
advice please
visit www.invitrogen.com/cellisolat
ration
viscousat samples
such as
Dynal
magnet.
l): see www.invitrogen.com/immunolo(DynaMag-96
orFor
DynaMag
-96
This wash
product
should
not Add
be used
with
be.
cols.
350xg.
ration •from
viscous
samples
asSide
•• High
(DynaMag-96
Side
or wells,
DynaMag
-96
2
ml
isolation
buffer
followed
bysuch
centrifugation
forfrom
8 min.
net gives quick and efficient
cell volumes
sepacols.
magnet
MPC-1.
volume
changes within
a workflow:
concentrated
at
the
side
of
the
well, allowing
Side
Skirted)
for recommended
products
and field
proto- is applied to the
whole
blood. The DynaMag-15
can befor elution in very small
magnet
MPC-1.
For
further
technical
advice
please
visit
www.invitrogen.com/cellisolation.
at
the
side
of
the
wells.
With
the
When
a
magnetic
Side
Skirted)
whole
blood.
The
DynaMag-15
can
be
is
product
should
not
be
used
with
350xg.
ration from
hs. wash volumes (DynaMag-96 Side or DynaMag
-96 viscous samples such as
• Low
elution
volumes (DynaMag-96 Bottom)used with all types of Dynabeads.
• in
Discard
the supernatant
�
Critical
notes
• Low
volumes
(DynaMag-96
Bottom)used with
allelution
residual
can be removed
volumes.
When
used
combination
Discard
the supernatant
and
resuspend
the
cell
pellet
intime
preferreda
=
Incubation
all types
of Dynabeads.
agnet
MPC-1.
�
Critical
notes
beads
concentrated at the• side
e Skirted)
whole
The DynaMag-15
can
befluid
= of
Incubation
time
plate, the beads are gently
andblood.
rapidly
medium.
Keep
the
cells o
•
Use
a
mixer
that
provides
tilting
and
rota™
medium.
Keep
the
cells
on
2
–
8°C
until
further
use
in
downstre
w
elution
volumes
(DynaMag-96
Bottom)
•
Discard
the
supernatant
and
resuspend
the
cell
pellet
in
preferred
cell
• Use
a mixer that
provides tilting
and rotawithout
disturbing
the
bead
pellet.time tion of the
with all types of Dynabeads.
with replaces
theDynaMag
-96 applications.
Side or
ritical notes
NOTE:
the
well,
residual
fluid
be This new product
=that
Incubation
theproduct
tubes all
toreplaces
ensure
that
Dyna-can
attracted to the walls orused
bottom
of
NOTE:
This
new
the
applications.
tion of the tubes to™ ensure
Dynamedium.
Keep
cells do
onnot
2 – 8°C
until
further
in downstream
™
Dynal
MPC™-L andDynaMag
Dynal MPC™-15
beads
at the
bottom
of theuse
e a mixer that provides tilting and rotaThe do
DynaMag
magnet
hastheMPC™-L
-96 Side Skirted magnets on
and settle
Dynal
MPC™-15
beads
not the
settle at-96
theSide
bottom
of the Dynal
removed
without
disturbing
the
the well,
alongthat
with
theNOTE:
bead-bound
This new product
replaces
tube.
applications.
magnets.
n of the tubes
to ensure
Dyna123.31D_32D_27_Rev001_Spec-06838.indd 1
tube.
magnets.
an
extra
column
(13
in
total)
to
enable
an
automated
platform,
these magnets
123.31D_32D_27_Rev001_Spec-06838.indd
1
10
Dynal pulled
MPC™-L and Dynal MPC™-15
For further
technical 10-10-21
advice
p
113.62D.indd
1
bead
pellet.
Thisbemagnet
can
be usedtechnical advice please visit
ads do notbiomolecules.
settle at the bottom
the beads
Withofthe
• This product
should not
used with
For further
www.invitrogen.com/cellisolat
113.62D.indd
1
08-10-14
Sign: ..........................................
• This product
should not be used with
be.
magnets.
Sign: ..........................................
sample
mixing
by
simply
shifting
the
magnetfor
MPC-1.
allow
for
significant
volume
changes
32D_27_Rev001_Spec-06838.indd
1
10-10-21
10.41.00
mixing
the
same
way
described
magnet MPC-1.
to
the
walls
or
bottom
of
the
wells,
it
is
For
further
technical
advice
please
visit
www.invitrogen.com/cellisolation.
D.indd
1
08-10-14 10.27.03
Date: ..................................2010
is
product
should not be used with
..................................2010
96-well plate
back
and forth from the
within a workflow:
Sign:
..........................................
= Incubation time
for the DynaMag™-96Date:
Side
magnet.
easy to remove the supernatant. Liquid
agnet MPC-1.
= Incubation time
1. KIT CONTENTS
DynaMag -96 Side Skirted
DynaMag -96 Side
DynaMag -96 Bottom
DynaMag -96 Side
DynaMag -96 Side Skirted
DynaMag -96 Bottom
Product description
can be added and removed either
manually or by an automated liquid
handling robot. When the magnetic field
is removed, the Dynabeads™ magnetic
beads can be resuspended in the liquid.
In the absence of a magnetic field,
the superparamagnetic Dynabeads™
magnetic beads exhibit no residual
magnetism. This superparamagnetic
characteristic enables the beads to float
freely and individually in the sample
volume and subsequently to be collected
at the walls or bottom of the well via
magnetic field for sample separation or
buffer exchange.
With strong magnets and great
functionality, the DynaMag™ magnets
outperform all other magnetic
separators, providing faster and more
efficient magnetic separation.
See thermofisher.com/magnets for the
full magnet range.t
right-most position
to the left-most
Date: ..................................2010
= Incubation time
position.
Each
shift
in
position causes
Kund: Invitrogen
Ordernr: 61426
™
the
Dynabeads
magnetic
beads to
Artikel: 123.31D_32D_27_Rev001_Spec-06838
alternate between opposite walls
Korrektur 1: 2010-09-28
Korrektur 3: 2010-10-11
of the
well. Continuous
reciprocal
Korrektur
2: 2010-10-07
Korrektur 4: 2010-10-21
shifting
results
in
continuous
mixing.
Färg: PMS 653
Antal sidor: 2 Format: 240x256
The benefits of this type of mixing are:
No
physical interaction with the
liquid volume during mixing
Reduced
chance of contamination
Reduced
sample degradation
Kund: Invitrogen
When Ordernr:
used 61426
in combination
with the
Artikel:™
123.31D_32D_27_Rev001_Spec-06838
DynaMag
-96 Bottom magnet on an
automated
allow
for
Korrekturplatform,
1: 2010-09-28 these
Korrektur
3: 2010-10-11
Korrektur 2: 2010-10-07
Korrektur 4: 2010-10-21
significant
volume changes
within a
Färg: PMS 653
Antal sidor: 2 Format: 240x256
workflow:
Ordernr: 61426
Kund: Invitrogen
High
wash volumes Artikel: 123.31D_32D_27_Rev001_Spec-06838
(DynaMag™-96 Side or
Korrektur 1: 2010-09-28
Korrektur 3: 2010-10-11
™
DynaMag
-96 Side
Skirted)
Korrektur
2: 2010-10-07
Korrektur
4: 2010-10-21
Färg:
653 μL) elution
Antal sidor:volumes
2 Format: 240x256
Low
PMS (5
(DynaMag™-96 Bottom)
High
wash volumes (DynaMag™-96 Side or
DynaMag™-96 Side Skirted)
Low
elution volumes (DynaMag™-96 Bottom)
Reduced
risk of volume loss
• When used in combination with the
DynaMag™-96 Bottom magnet on an
automation platform, these magnets
allow for significant volume change
within a workflow:
High
wash volumes (DynaMag™-96 Side or
DynaMag™-96 Side Skirted)
Low
elution volumes (DynaMag™-96 Bottom)
For Research Use Only. Not for use in diagnostic procedures.
* Because plates may vary, users should test their plates for compability.
Precautions
These magnets contain very strong permanent magnets. People wearing a pacemaker
or any other medical magnetized implant should not use this product unless advised
by a health professional; the implant could be affected or damaged by exposure to a
strong magnetic field. Keep tools and objects that could be damaged by the magnetic
field out of the working area. This includes, but is not restricted to, credit cards and
other products containing magnetic recording devices. Keep away from delicate
instruments, watches, electronic equipment, displays and monitors. The magnet may
attract steel or other magnetic material with high mechanical forces. Take care during
handling. Avoid contact between two magnets. Do not pull the magnets apart if
contact has been made; twist off to prevent damage to the unit or fingers.
The Health and Safety Officer should take all necessary steps and full responsibility
to ensure that the precautions and statements are followed and adhered to.
Cleaning and disinfection
The following materials are recommended for cleaning purposes. Spray and/or wipe
the DynaMag™ units either with 70% isopropyl alcohol, 1% sodium hypochlorite
solution (bleach), or 0.1N HCl solution. Do not submerge in aqueous solutions and
avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth
and mild detergent when exposed to harsh solvents.
IMPORTANT: Do not autoclave DynaMag™ magnets.
Storage and stability
The magnets contains high-energy Neodymium permanent magnets. Magnetic
strength will not diminish significantly during the lifetime of the product. Do not
use the magnets above 50°C (122°F) and store in a cool, dry environment. Avoid
prolonged exposure of the magnets to direct sunlight or artificial UV light as the
surface material may become brittle.
Important licensing information
This product may be covered by one or more Limited Use Label Licenses. By use of
this product, you accept the terms and conditions of all applicable Limited Use Label
Licenses.
Manufactured by Life Technologies AS, Norway. Life Technologies AS complies with
the Quality System Standards ISO 9001:2008 and ISO 13485:2003.
Limited Product Warranty
Life Technologies Corporation and/or its affiliate(s) warrant their products as set
forth in the Life Technologies’ General Terms and Conditions of Sale found on Life
Technologies’ website at www.lifetechnologies.com/termsandconditions. If you
have any questions, please contact Life Technologies at www.lifetechnologies.com/
support.
SPEC-06838
©2015 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of
Thermo Fisher Scientific and its subsidiaries unless otherwise specified.
DISCLAIMER: TO THE EXTENT ALLOWED BY LAW, LIFE TECHNOLOGIES AND/OR ITS AFFILIATE(S)
WILL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, MULTIPLE OR
CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THIS DOCUMENT,
INCLUDING YOUR USE OF IT.
For support visit thermofisher.com/support or
email [email protected]
thermofisher.com