RADIUS

R
RADIUS
Tender specification description
One or two-wing interior door (with symmetrical / asymmetrical wings).
RADIUS door panel: 50 mm deep hollow-core, seasoned fir wooden frame, NISOCAR honeycomb; reinforcements for the
fixing of locks. 4.00 mm thick wood chip or 4 mm MDF sheet surfaces with 0.9 mm HPL coating. Upon request, 0.9 mm 99.9
pure lead plate inserted in the panel and positioned in such a way as to ensure that it overlaps the lead inserts of the frame.
Perimetral aluminum panel profile with ledge and gasket. Extruded aluminum three-wing hinges with 180° opening angle and
oversize steel pin inserted in a self-lubricating nylon sheath. YALE cylinder locks.
Anodized aluminum internal/external safety lever handle. Upon request, with draught guard at the bottom of the panel with
closure controlled by a pin driven into the frame ledge.
Doorpost: (door holding frame) made of extruded aluminum alloy 6060 (EN 573-3) profile, with 15/10 thickness with telescopic
assembly to the door trims. Doorposts and rails are assembled by means of aluminum brackets. Extruded aluminum three-wing
hinges with 180° opening angle and oversize steel pin inserted in a self-lubricating nylon sheath. Door guard conforming to UNI 9122.
With lead inserts positioned in such a way as to form a continuous surface with the lead plate inside the panel and in the wall in which
the door is built. The fixing screws of the wooden installation frame and the tensioning screws of the door trims are concealed by the
door guard. Frame and trim system with R5 safety radius
X-ray proof inspection lite
Highly transparent observation lite offering a high degree of protection from ionizing radiation. The lite frame consists of
extruded 6060 (EN573-3) aluminum profiles with 15/10 thickness. Telescopic system thanks to the glazing bead fixed to the
frame by means of a special clip and to the frame trims. The frame horizontal and vertical elements are assembled by means
of aluminum brackets. Lead inserts in the frame form a continuous X-ray proof surface with the X-ray proof glass and the
lead panel of door and wall. Frame and trim system with R5 safety radius.
Captions
1 Aluminum alloy doorposts with lead plate
• Without sharp corners: 5 mm safety radius.
• Sandblasted, anodized aluminum surface.
• Without exposed grooves for greater hygiene.
2 Aluminum alloy frame
Overlapping aluminum panel profile with ledge on three sides.
3 Double door guard on panel border and frame
• Noise dampening.
• Draught proofing.
• Improved sound proofing.
• Conceals the fixing screws.
4 Door panel with lead plate
• Panel with interposed 99.9% pure lead plate conforming to UNI 6450 available in various thicknesses.
• Decorative Print HPL (high pressure laminate) coating.
– Bump, scratch and abrasion-proof.
– Non-porous closed-cell laminate, resistant to all common solvents and detergents for domestic use, to hospital
disinfectants; washable with hot water or steam.
– Wide range of colors as standard supply and on request.
– HPL manufactured according to European standard
UNI EN 438-1.
– Light-fast colors.
– Antistatic, unlike other traditional melamine coated materials.
5 Oversize hinges
• Three-wing hinges with oversize steel pin inserted in
self-lubricating bushes.
R
RADIUS
OVERVIEW
Aluminum door frame with lead plate
Overlapping aluminum door profile with ledge
on three sides
Hollow-core panel with interposed lead plate
Oversize three-wing hinges
Double door guard (on lock and doorpost side)
1
3
3
2
5
4