T E C H N I C A L D ATA S H E E T
Long Jumper Cables
Rev.: 01/2014-05-06
1/2
Soldered Jumper Cables up to 20 meters
EUPEN offers a wide range of jumper cables with 1/2” Hiflex cable (5092 / EC4-50-HF) or 1/2” standard cable
(5128 / EC4-50) with soldered connectors*. In particular, we offer “long” jumpers (more than 10 meters).
They are designed for watertight applications and optimised jumper cable performances.
Also available with one loose connector.
Features
• excellent return loss values
• very low PIM
• easy, fast and reliable installation
• water tightness according to IP67/IP68
(mated connectors)
• longitudinal water tightness is provided
by the special connector design
(O-Ring in connector head)
• the overmolding of the connector provides an
additional mechanical protection
• length: 10, 15 or 20 meters
(other lengths possible on request)
Product reference
EC4-vv-S-www-DyzDyz
EC4-vv-SL-www-DyzDyz
EC4 =
vv =
S=
SL =
1/2” cable (5128)
HF for Hiflex (5092)
soldered connectors both sides
first connector soldered,
second connector delivered loose
www = length in cm
D=
Connector DIN 7-16 type
y=
M for male or F for female
z=
L for right angle connector
(z =
nothing for straight connector)
Marking
Soldered Jumper Cables up to 20 meters
• Manufacturer EUPEN
• Week & Year of Production
• Product Ref.: for ex.: EC4-HF-S-200-DMDM
• Torque
• Product Nr. EUPEN
• Serial Number
* see our datasheet “Soldered Jumper Cables”
for an overview of the other possibilities
ISO
Certified
Company KabelwerK eupen aG - Malmedyer Straße 9 - 4700 eupen - belGIuM
Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail: [email protected]
T E C H N I C A L D ATA S H E E T
Long Jumper Cables
Rev.: 01/2014-05-06
2/2
Soldered Jumper Cables up to 20 meters
TECHNICAL DATA
Cable type
EC4-50-HF (5092)
1/2”-HIFLEX
Electrical
• Nominal impedance [Ω]
• Frequency range [MHz]
• PIM ratio (2 x 20 W carrier) [dBc]
• Attenuation per m at 20 °C [dB] - without connectors*
960 MHz
1880 MHz
2200 MHz
2600 MHz
• RF Voltage rating (Peak) [V]
• Relative propagation velocity [%]
50 ±1
10 - 2700
≤ -155 (Typical -163)
Mechanical
• Minimum bending radius [mm]
- single
- repeated
• Connector torque (nominal) [Nm]
- DIN 7-16 connector
- N type connector
Environmental
• Temperature range [°C]
- installation
- operating
• Protection against water ingress
- Longitudinal water tightness
• General environmental
• RoHS compliance (EU Directive 2002/95/EC)
Maximum power rating [W] **
Connector 1 Connector 2
Reference
7-16
7-16
...-DyzDyz
Return loss [dB] (VSWR) up to 20 meters
Connector 1 Connector 2
Reference
7-16
7-16
...-DyDy
...-DyDML
EC4-50-(5128)
1/2”
0.106
0.151
0.170
0.187
1130
82
0.071
0.103
0.113
0.123
1600
88
30
30
70
125
28
12
28
12
-40 to +60
-55 to +85
Water tightness acc. to IP 68 (0.5 bar / 24 h)
Two O-rings in the DIN 7-16 connector head
Corrosion and UV resistant
YES
0.8-1.0 GHz
880
1.7-2.2 GHz
560
2.5-2.7 GHz
500
0.8-1.0 GHz
1090
1.7-2.2 GHz
710
2.5-2.7 GHz
630
0.8-1.0 GHz 1.7-2.2 GHz 2.5-2.7 GHz 0.8-1.0 GHz 1.7-2.2 GHz 2.5-2.7 GHz
>32 (<1.05) >29 (<1.075) >27 (<1.095) >32 (<1.05) >29 (<1.075) >27 (<1.095)
>30 (<1.065) >27 (<1.095) >25 (<1.12)
-
Soldered Jumper Cables up to 20 meters
* Typical values without connectors, the typical connector attenuation (2 connectors) is less than 0.02 [dB]
** Ambient temperature = 40 °C; Temperature of inner conductor = 100 °C; VSWR = 1.0; no solar loading
ISO
Certified
Company KabelwerK eupen aG - Malmedyer Straße 9 - 4700 eupen - belGIuM
Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail: [email protected]