PowerRack & Pinion 4 - What length of rack? PowerRack™ RACK & PINION vent opener Unrivaled quality that makes a difference The PowerRack is built to operate your vents reliably, so you can concentrate on growing. When choosing which rack and pinion consider reliability and savings on maintenance costs. Virtually maintenance free, the PowerRack is a solid, reliable unit. Features: • Zinc pinion gear with shoulders to bear the weight, extending the life of the gear. • Easy alignment: Rack works even when the vent is not perfectly square. Wide housing allows for the inevitable movement in the vents. This unique design prevents binding. • Freedom from corrosion: Stainless clevis pins, cotter pins, set screws, cast sash brackets and tough nylatron bearings. • Precision cut teeth on the PowerRack arms minimize sharp edges and assure smooth operation. • Holes in the pinion housing are punched with a stamping tool to maintain exact spacing. • The PowerRack arm and housing is manufactured from aluminum alloy for strength and freedom from corrosion. • Wide load-bearing surfaces • Replaceable parts Straight PowerRack Models Length Shaft Shipping Weight Part # 18” 18” 28” 28” 36” 36” 42” 42” 48” 48” 53” 53” 66” 66” 72” 72” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1.25 1.25 2.10 2.10 2.40 2.40 2.50 2.50 2.55 2.55 2.60 2.60 2.95 2.95 3.10 3.10 M-2618 M-2718 M-2628 M-2728 M-2636 M-2736 M-2642 M-2742 M-2648 M-2748 M-2653 M-2753 M-2666 M-2766 M-2672 M-2772 lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. / / / / / / / / / / / / / / / / 0.6 KG 0.6 KG 0.95 KG 0.95 KG 1.09 KG 1.09 KG 1.13 KG 1.13 KG 1.16 KG 1.16 KG 1.18 KG 1.18 KG 1.34 KG 1.34 KG 1.41 KG 1.41 KG UNIVERSAL SHAFT HANGER The universal shaft hanger supports the shaft that drives the PowerRack. Wadsworth’s shaft hangers are made of 12-gauge rigid galvanized steel for reliability. They have nylatron bushings that long outlast bronze bushings. Easy mounting with the pre-punched holes and slots for 5/16” and 3/8” diameter U-bolts. Shaft hanger holes and slots will fit 1”- 3” pipe, as well as square tubing, angle, channel and various other greenhouse members. (U-Bolts not included) • Economically priced All of these details add up to a long life for your vent automation system. 1 3/8” Shaft hanger 1 5/8” Shaft hanger Part #S-2806 Shipping Wt. 1.1 lbs. / 0.5 KG Part #S-2808 Note: All models have 6” of rack movement per revolution of drive shaft. 22 Shipping Wt. 1.1 lbs. / 0.5 KG The curved PowerRack Rack & Pinion is designed to give additional clearance (54” radius) when space is tight. When a straight rack might interfere with a curtain system or aisle this is the ideal solution. RACK AND PINION SASH ADAPTER CURVED POWERRACK MODELS Length Shaft Shipping Weight Part # 28” 28” 36” 36” 42” 42” 48” 48” 53” 53” 66” 66” 72” 72” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 1-3/8” 1-5/8” 2.10 2.10 2.40 2.40 2.50 2.50 2.55 2.55 2.60 2.60 2.95 2.95 3.10 3.10 M-2828 M-2928 M-2836 M-2936 M-2842 M-2942 M-2848 M-2948 M-2853 M-2953 M-2866 M-2966 M-2872 M-2972 lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. / / / / / / / / / / / / / / 0.95 0.95 1.09 1.09 1.13 1.13 1.16 1.16 1.18 1.18 1.34 1.34 1.41 1.41 KG KG KG KG KG KG KG KG KG KG KG KG KG KG PowerRack & Pinion CURVED PowerRack RACK & PINION ROUND & SQUARE U-BOLTS* To determine size, see the illustration below. When replacing rack and pinions on a vent the existing sash brackets are often in good condition, but do not fit the wider rack arms. With this in mind Wadsworth has designed an adapter with 1/4” wide tongue that will fit most older style sash brackets. Made of cast zinc, the adapter slips easily into the end of the rack arm and is held in place with a clevis pin. Part# H-2489 H-2491 H-2492 H-2494 H-2520 H-2525 H-2530 H-2537 A 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” x x x x x x x x B 1-1/2” 1-3/4” 2” 2-1/2” 1-9/16” 2-1/8” 2-5/8” 3-1/8” x x x x x x x x C 2-1/2” 2-3/4” 2-5/8” 3-1/8” 2-1/2” 3” 3-1/2” 4” Pipe Size* 1” 1-1/4” 1-1/2” 2” 1-1/2” sq. 2” sq. 2-1/2” sq. 3” sq. *Other sizes available C C Pinion sash adapter Part #F-0919 Shipping Wt: .316 lbs. / .143 KG B (Round) A B A (Square) 23
© Copyright 2026 Paperzz