GE
Lighting
Albeo LED Luminaire
™
Linear Low Bay Lighting
(ALC4 - Series)
imagination at work
Product Features
The Albeo™ ALC4-series LED luminaire is an energy-efficient, low maintenance alternative to traditional linear fluorescent
in a variety of commercial, low bay lighting applications. Compact and sleek in design, the ALC4 features a long rated life
of 77,000 hours (L70) and can deliver up to 600 feet of outstanding quality light in a continuous run configuration. Ideal for
industrial, commercial and light assembly applications, the Albeo ALC4 LED fixture can be matched with motion, daylight
and wireless controls for increased energy savings.
Applications
Mounting
• Designed to meet recommended luminance and illuminance requirements for low bay and task level applications in commercial, industrial, warehouse, office, education, health, retail and data center settings.
• Recommended for low bay lighting applications at
20 feet or lower.
• Chain, cable, 1/2” threaded rod, and surface mount.
• Continuous run option available.
Housing
Controls
• Rugged extruded aluminum housing.
• Each LED module is equipped with an upper limit
thermal control to ensure fixture lifetime throughout
the temperature range.
• Motion and Daylight sensor can be combined
for additional energy savings.
• For wireless controls please consult factory.
LED & Optical Assembly
• Precision lens system provides optimized illumination for open floor plan and aisle layouts.
• Multiple photometric distributions of 20, 40, 80 and
120 degrees. Plus diffuse and wide lens options.
• Utilizes high brightness LEDs, 70, 80 and 90 CRI at
4000K & 5000K typical.
• LM-79, LM-80 tests and reports are performed in accordance to IESNA standards.
• Directional LEDs put light where it’s needed without
reflectors to greatly increase efficiency.
Lumen Maintenance
• System rating is L85 at 50,000 hours. Contact manufacturer for Lxx rating (Lumen Depreciation)
beyond 50,000 hours.
Ratings
®
•
DLC. Listed.
/
•
UL 1598 Suitable for Damp Locations.
• UL 8750 LED equipment in Lighting Products.
• Temperature Rated at (–30°C to 45°C) (-22°F to 113°F).
> 77,000 Life Hours per IES TM-21.
• Projected L70 (15K) =
Industry Awards
Finish
• White polyester powder coat.
Electrical
•
•
•
•
120-277 volt and 347-480 volt available.
System power factor is >90% and THD <20%.*
Integral surge protection:
For 120-277VAC per IEEE/ANSI C62 41.1:1991, 4kV
IEC 61000-4-12.
EMI: Title 47 CFR 15 Class A.
* System power factor and THD is tested and specified at 120V
input and maximum load conditions.
Warranty
• 5-year limited system warranty standard.
Ordering Number Logic
Albeo™ Linear Low Bay LED Lighting
A
_ L_ C
_ 4_ - _ PRODUCT
ID
VOLTAGE
1
_ - _ - __ - _ - _ - _ _
- _ - __ MODULE
LED COLOR OPTICS
DRIVE
TEMP
BEAM
CURRENT
A= Albeo
0 = 120/277 1 = 1 module T= Standard 70 Plus CRI
1 = 120*
L = Linear
H= High Output 47 = 4000K
4 = 277*
57 = 5000K
5 = 480*
C = C-Series D = 347*
V = Very High 80 Plus CRI
Output
48 = 4000K
*Specify single
4 = LED
58 = 5000K
voltage
only
if
Generation
cord and plug
90 Plus CRI
needed.
FIXTURE
LENGTHS
1 = 120°
2 = 20°
4 = 40°
8 = 80°
D = Diffused
lens
49 = 4000K
59 = 5000K
MODULE
#
1
1
1
1
1
1
DRIVE
CURRENT
T
H
V
T
H
V
FIXTURE
LENGTH
LED
COUNT
4000K/5000K
4ft72
4ft144
4ft144
8ft144
8ft288
8ft288
1
1
1
1
1
1
DRIVE
CURRENT
T
H
V
T
H
V
FIXTURE
LENGTH
LED
COUNT
4000K/5000K
1
1
1
1
1
1
DRIVE
CURRENT
T
H
V
T
H
V
STAND ALONE FIXTURES
N= None
A = On/off motion aisle
B = On/off motion 360
C = On/off cold temp aisle
D = On/off cold temp 360
WATTS
120-277V
347-480V
LPW
120-277V
347-480V
WATTS
120-277V
347-480V
LPW
120-277V
347-480V
4ft72 2700 30379073
4ft
144 4500 47529687
4ft
144 6200 71768782
8ft
144 5400 57699578
8ft288 9000 9410396 87
8ft
28812400142
152
8782
TYPICAL INITIAL
LUMENS 90 CRI
MODULE
#
FINISH
3200 30 3710786
5350
47 52 114103
7400 71 7610497
6400 57 6911293
10700 94 103114104
14800 142152104 97
TYPICAL INITIAL
LUMENS 80 CRI
MODULE
#
CORD &
PLUG
- W
_ - _
K = Knock out W= White
N = None ST = Standard
V = 0-10V Fits chain, cable access plug Powder coat
Stand alone and ½” threaded A = 6 ft. 18-3
cord & twist
rod.
lock 15 amp
D = 0-10V
Daisy chain 51 = Cable/ Hook plug
End Cap
B = 6 ft. 18-3
5 ft. pair
Configura- If you choose options
R=
52 = Cable/ Hook cord only
tions can below you must choose
C = 12 ft. 18-3
Continuous 10 ft. pair
control wiring option V or D run wiring 53 = Cable/ Hook cord & twist
be found
on Page
lock 15 amp
15
ft.
pair
E = Daylight sensor
3 of this
54 = Cable/ Hook plug
brochure. F = Motion aisle/daylight
D = 12 ft. 18-3
20 ft. pair
G = Motion 360/daylight
cord only
H = Pre-wired (no sensor)
SM
=
Surface
J = 0-10V Motion 360
See
Mount*
K = 0-10V Motion aisle
factory for L = 0-10V Motion 360 cold
custom cord
*Not
available
with
M= 0-10V Motion aisle cold
lengths.
continuous run
CONTINUOUS RUN FIXTURES
See Mounting &
N= None
Accessories
P = On/off motion 360
Q = On/off cold temp 360
Note:
R = Motion 360/daylight
IES files located
T = 0-10V Motion 360
on GE website
U = 0-10V Motion 360 cold
www.gelightingsolutions.com
Note: Only 1 sensor needed
for every 48 feet.
4 = 4ft S = Both
8 = 8ft Ends
L = Left
R = Right
M = Open
W = Wide
lens
TYPICAL INITIAL
LUMENS 70 CRI
MOTION/DAYLIGHT CONTROL
SENSOR
WIRING MOUNTING
END
CAP
_
FIXTURE
LENGTH
LED
COUNT
4000K/5000K
WATTS
120-277V
347-480V
LPW
120-277V
347-480V
4ft72 2350 30377864
4ft
144 3900 47528375
4ft
144 5350 71767570
8ft
144 4700 57698268
8ft288 7800 9410383 76
8ft
28810700142
152
7570
Note: Lumen data shown is for 120 deg (1) optic. See tabel at right for other light optic factors.
OPTICS
BEAM
%
OUTPUT
120 (1)100%
20 (2)94%
40 (4)92%
80 (8)97%
Diffused (D)87%
Wide (W)97%
-
OPTIONS
*W = Wireless
*Please consult
factory for
wireless
application
End Cap Configuration
See page 2 for complete ordering number logic
Left
S=
Right
Stand Alone
Fixture
Both End Caps
L=
Continuous
Run Fixture
R=
Continuous
Run Fixture
M=
Left End Cap
Right End Cap
Continuous
Run Fixture
Open End Caps
(Middle)
Photometrics
Optics for Common Applications
Narrow Distribution
40° Full Beam Angle
Aisle Distribution
20° Full Beam Angle
90°
90°
S
Spacing
g Crite
Criteria:
r
0° = 1
0
1.88
.8
90° = 0.56
90
56
VA: 0° 10° 20° 30°
S
Spacing
g Crite
Criteria:
r
0° = 1
0
1.49
.4
90° = 0.66
90
66
80°
80°
70°
70°
60°
60°
50°
50°
VA: 0° 10° 20° 30°
40°
40°
Standard Distribution
120° Full Beam Angle
Standard Distribution
80° Full Beam Angle
90°
S
Spacing
g Crite
Criteria:
r
0° = 1
0
1.28
.2
90° = 1.39
90
39
VA: 0° 10° 20° 30°
90°
S
Spacing
g Crite
Criteria:
r
0° = 1
0
1.32
.3
90° = 1.28
90
9
28
80°
80°
70°
70°
60°
60°
50°
50°
VA: 0° 10° 20° 30°
40°
40°
160° Wide Beam Angle
120° Diffused
90°
S
Spacing
g Crite
Criteria:
r
0° = 1
0
1.21
.2
90° = 1.30
90
9
30
VA: 0° 10° 20° 30°
90°
Spaci g Crite
SSpacing
Criteria:
r
0° = 1.
0
1.30
1
.3
90° = 2.27
90
27
80°
80°
70°
70°
60°
60°
50°
50°
VA: 0° 10° 20° 30°
40°
40°
Lens selection by application
The Albeo™ ALC4-series optical lens system enables LEDs to provide precise illumination where needed. Lenses are
designed for commercial & industrial applications where mounting height, fixture spacing & light levels help determine lens
selection. The following table outlines lens options and suggested application. Consult factory for specific project layouts.
LENS TYPE
MOUNTING HEIGHT
SPACE TYPE
80°, 120°, Diffused, Wide Beam
Below 20 Feet
Open Floor Plan
20°, 40°
Below 20 Feet
Low Bay Aisles
Mounting & Accessories
MOUNTING OPTIONS
IMAGE
ORDER LOGIC CODE
Chain/Cable/Rod
Mount
Standard Chain/Cable/Rod Mount
Available on all fixture configurations
(chain, cable or rod not included). Cable
Hook can be ordered as an accessory.
Cable Hook (optional)
Use with Standard cable/chain/rod mount.
Order separately. Price adder per pair.
5 ft., 10 ft., 15 ft., 20 ft. lengths available.
ST = Standard
51=Cable-Hook-05ft-Pair
52=Cable-Hook-10ft-Pair
53=Cable-Hook-15ft-Pair
54=Cable-Hook-20ft-Pair
Chain/Cable/Rod mount is standard and included
in price. Additional price for Cable Hook. See
“Installation Instructions” for mounting details.
Option A
Surface Mount (optional)
Not available with continuous run.
SM = Surface Mount
Option B
Surface Mount (optional)
Not available with continuous run.
ALC4 can be mounted to a surface using holes
predrilled in the bottom fixture or to a junction
box using the mounting plate provided. See
“Installation Instructions” for more details.
Product Dimensions
Albeo™ Linear Low Bay LED Lighting
48”
2.43”
(ALC4 - 4 ft./8 ft.)
Top View
2.43”
48”
4.80”
3.87”
2.43”
End View
96”
48”
2.43”
96”
Side View
Weight:
120-277V: 8 lbs.
347/480V: 11 Lbs.
Weight:
120-277V: 16 lbs.
347/480V: 19 Lbs.
Wireless Control/Occupancy Sensor Module
14.12”
14.12”
Top View
2.57”
2.57”
Side View
4.72”
4.72”
End View
Weight: 2.5 lbs.
Note: The occupancy sensor shown
is a representative example
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2014 GE.
ALB004 (Rev 09/15/14)