Hy-Brid Lifts by Custom Equipment HB-1430 TM Specifications & Features Overall LOW FLOOR LOADING LOW PLATFORM HEIGHT, FULL SWING GATE Extremely lightweight design allows for use on delicate or sensitive surfaces. Easy access to platform makes fatigue, neck and knee strain a thing of the past Virtually Maintenance Free Longer run time Improved life cycle cost of ownership Work up to 16 hours on a single charge Railings Steel slideout extension Supported on midrail, no platform rollers eliminates jamming rounded Modular rails Unique rail technology provides greater strength and durability against wear and tear on the jobsite; pocket joints for easy railing removal or replacement Scissors Slide-off Upper Control Box Secure, yet easy removal allows greater operator mobility on platform SINGLE HYDRAULIC LIFT CYLINDER Reduces scissor sway Only two hydraulic connections mean less leak points and maintenance to worry about solid scissor stack velocity fuse on cylinder end OVERSIZED 1.25” (3.18 cm) PINS Prevents descent if hydraulic line failure occurs Greater operator comfort, robust base FULL SIZE FORK POCKETS ON BOTH ENDS Rounded corners Better safety and stability when lifting Minimizes surface contact damage if operator hits a wall Counter-rotating Front wheels direct drive dc wheel motors Prevents damage to sensitive flooring; dual front wheel design Quiet, efficient, and low amp draw NON-MARKING WHEELS mechanical pothole deployment in base Prevents surface scuffs Failsafe, simple Specs heights US Metric Performance Metric 304 kg Platform Working Height 20 ft 6.1 m Platform Height (max.) 14 ft 4.26 m Rated Occupancy 2 person 2 person Platform Height (min.) 25.34 in 0.64 m Weight 1645 lb 746 kg Ground Clearance 3 in 0.64 m Inside Turning Radius 21 in 0.53 m Stowed Height 70 in 1.78 m Lift Speed up/down 21/31 sec 21/31 sec Overall Width 30 in 0.76 m Min. Wheel Load 80.9 psi 557.6 kPa Overall Length 69.5 in 1.77 m Max. Wheel Load 113.6 psi 783 kPa Platform Width 25 in 0.64 m Min. Machine Load 125.3 psf 6.00 kPa Platform Length 60 in 1.52 m Max. Machine Load 180 psf 8.43 kPa Platform Extension - ANSI 30 in 0.76 m dimensions Platform Capacity (total) US 670 lb Floor Loading 1-262-644-1300 This brochure is for illustrative purposes only and based on the latest information available at the time of printing. Hy-Brid Lifts reserves the right to make changes at any time, without notice, to specifications, standard and optional equipment. Hy-Brid Lifts™ is a trademark of Custom Equipment, Inc. ©2013 Custom Equipment, Inc. All rights reserved. 01/13 Part No. L01-05 www.hybridlifts.com Hy-Brid Lifts ™
© Copyright 2024 Paperzz